[U-Boot] [PATCH resend 2/2] net/macb: Add arch specific routine to get mdio control

[Vipin Kumar <vipin.kumar@st.com>]

ping. one more :)

On 12/6/2012 12:40 PM, Vipin KUMAR wrote:
> From: Shiraz Hashim<shiraz.hashim@st.com>
>
> SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their
> respective phys. Currently their is a fixed configuration in which only a
> particular MAC can use the MDIO lines.
>
> Call an arch specific function to take control of specific mdio lines at
> runtime.
>
> Signed-off-by: Shiraz Hashim<shiraz.hashim@st.com>
> Signed-off-by: Vipin Kumar<vipin.kumar@st.com>
> ---
>   drivers/net/macb.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 8bacbda..45fbbd7 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -163,6 +163,13 @@ static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
>   	return MACB_BFEXT(DATA, frame);
>   }
>
> +static void __def_arch_get_mdio_control(const char *name)
> +{
> +	return;
> +}
> +int arch_get_mdio_control(const char *name)
> +	__attribute__((weak, alias("__def_arch_get_mdio_control")));
> +
>   #if defined(CONFIG_CMD_MII)
>
>   int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
> @@ -173,6 +180,7 @@ int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
>   	if ( macb->phy_addr != phy_adr )
>   		return -1;
>
> +	arch_get_mdio_control(devname);
>   	*value = macb_mdio_read(macb, reg);
>
>   	return 0;
> @@ -186,6 +194,7 @@ int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
>   	if ( macb->phy_addr != phy_adr )
>   		return -1;
>
> +	arch_get_mdio_control(devname);
>   	macb_mdio_write(macb, reg, value);
>
>   	return 0;
> @@ -377,6 +386,7 @@ static int macb_phy_init(struct macb_device *macb)
>   	int media, speed, duplex;
>   	int i;
>
> +	arch_get_mdio_control(netdev->name);
>   #ifdef CONFIG_MACB_SEARCH_PHY
>   	/* Auto-detect phy_addr */
>   	if (!macb_phy_find(macb)) {