[U-Boot] [PATCH v3] spi/arm-pl022: Add support for ARM PL022 spi controller

[Armando Visconti <armando.visconti@st.com>]

On 12/13/2012 12:41 PM, Vipin KUMAR wrote:
> From: Armando Visconti<armando.visconti@st.com>
>
> This patch adds the support for the ARM PL022 SPI controller for the standard
> variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
>
> Signed-off-by: Armando Visconti<armando.visconti@st.com>
> Signed-off-by: Vipin Kumar<vipin.kumar@st.com>
> ---
> Changes in v3
>   Added void to spi_init arguments
>   Used readl/writel in place of u16 accessors
>   Fix: Provided address of register in place of value to readl/writel IO
>    accessors
>
> Tested with spear1340-evb
>

I recall now that SPI variant is same also on the new SoC (I2C cell is
different).

So no need to test over it.
SPEAr1340 is enough.

Ciao,
Arm