From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bo Shen <voice.shen@atmel.com>
Date: Fri, 21 Dec 2012 17:59:52 +0800
Subject: [U-Boot] no mtdparted from U-Boot> prompt
In-Reply-To: <1356047588.28896.58.camel@genx>
References: <1356047588.28896.58.camel@genx>
Message-ID: <50D43318.8090904@atmel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Johns,

On 12/21/2012 07:53 AM, johns at msli.com wrote:
> This is my first post to the list.
> I am using u-boot-1.3.4 in buildroot-2011.11
> My device is a at91sam9g20-ek
> I have a patch adding: include/configs/at91sam9g20ek.h
> which I gather acts as a config file for u-boot.
>
> U-Boot>  help
> does not list mtdparts
>
> But my bootargs does use it:
> bootargs=mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2

This mtdparts is defined for Linux kernel NAND driver.

>
> Is there a trick to add the mtdparts command?

Yes, you need to add "#define CONFIG_CMD_MTDPARTS" in

include/configs/at91sam9g20ek.h


> Or is there supposed to be a command?
>
> I unsuccessfully added to include/configs/at91sam9g20ek.h
> #define CONFIG_JFFS2_NAND 1
> #define CONFIG_JFFS2_CMDLINE 1
> #define CONFIG_CMD_JFFS2 1 // Required to include cmd_jffs2.c
> which did not result in adding the command line.
>
>
>
>
> NOTICE: This email may contain confidential information.  Please see http://www.meyersound.com/confidential/ for our complete policy.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot