From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/9] mx28evk: Add support to dynamically choose between ftd use or not
Date: Wed, 26 Dec 2012 12:15:57 +0100 [thread overview]
Message-ID: <50DADC6D.3080201@denx.de> (raw)
In-Reply-To: <1356109151-6623-7-git-send-email-otavio@ossystems.com.br>
On 21/12/2012 17:59, Otavio Salvador wrote:
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
Hi Otavio,
> include/configs/mx28evk.h | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
> index 3cc0726..5c1c052 100644
> --- a/include/configs/mx28evk.h
> +++ b/include/configs/mx28evk.h
> @@ -290,6 +290,8 @@
> "uimage=uImage\0" \
> "console_fsl=ttyAM0\0" \
> "console_mainline=ttyAMA0\0" \
> + "ftd_file=imx28-evk.dtb\0" \
> + "ftd_addr=0x41000000\0" \
> "mmcdev=0\0" \
> "mmcpart=2\0" \
> "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
> @@ -301,13 +303,22 @@
> "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
> "mmcboot=echo Booting from mmc ...; " \
> "run mmcargs; " \
> - "bootm\0" \
> + "if fatload mmc ${mmcdev}:${mmcpart} ${ftd_addr} ${ftd_file}; then " \
> + "bootm ${loadaddr} - ${ftd_addr}; " \
> + "else " \
> + "bootm; " \
> + "fi;\0" \
> "netargs=setenv bootargs console=${console_mainline},${baudrate} " \
> "root=/dev/nfs " \
> "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> "netboot=echo Booting from net ...; " \
> "run netargs; " \
> - "dhcp ${uimage}; bootm\0"
> + "dhcp ${uimage}; " \
> + "if dhcp ${ftd_addr} ${ftd_file}; then " \
> + "bootm ${loadaddr} - ${ftd_addr}; " \
> + "else " \
> + "bootm; " \
> + "fi;\0"
>
> #define CONFIG_BOOTCOMMAND \
> "mmc dev ${mmcdev}; if mmc rescan; then " \
>
Please fix the following warning reported by checkpatch:
WARNING: line over 80 characters
#39: FILE: include/configs/mx28evk.h:306:
+ "if fatload mmc ${mmcdev}:${mmcpart} ${ftd_addr} ${ftd_file}; then " \
total: 0 errors, 1 warnings, 32 lines checked
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-12-26 11:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-21 16:59 [U-Boot] [PATCH 0/9] Improve default environment for easy use Otavio Salvador
2012-12-21 16:59 ` [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type Otavio Salvador
2012-12-26 11:02 ` Stefano Babic
2012-12-26 18:17 ` Otavio Salvador
2012-12-27 9:33 ` Stefano Babic
2012-12-27 10:29 ` Wolfgang Denk
2012-12-27 20:37 ` Otavio Salvador
2012-12-21 16:59 ` [U-Boot] [PATCH 2/9] mx53loco: " Otavio Salvador
2012-12-26 11:07 ` Stefano Babic
2012-12-21 16:59 ` [U-Boot] [PATCH 3/9] mx53loco: Change default loadaddr to 0x72000000 Otavio Salvador
2012-12-26 11:10 ` Stefano Babic
2012-12-21 16:59 ` [U-Boot] [PATCH 4/9] mx6qsabrelite: Change default loadaddr to 0x12000000 Otavio Salvador
2012-12-26 11:12 ` Stefano Babic
2012-12-21 16:59 ` [U-Boot] [PATCH 5/9] mx6qsabre_common: " Otavio Salvador
2012-12-26 11:14 ` Stefano Babic
2012-12-21 16:59 ` [U-Boot] [PATCH 6/9] mx28evk: Add support to dynamically choose between ftd use or not Otavio Salvador
2012-12-26 11:15 ` Stefano Babic [this message]
2012-12-26 18:19 ` Otavio Salvador
2012-12-21 16:59 ` [U-Boot] [PATCH 7/9] mx53loco: " Otavio Salvador
2012-12-26 11:31 ` Stefano Babic
2012-12-26 12:14 ` Fabio Estevam
2012-12-26 18:23 ` Otavio Salvador
2012-12-27 9:44 ` Stefano Babic
2012-12-27 21:22 ` Otavio Salvador
2012-12-28 8:52 ` Stefano Babic
2012-12-28 17:47 ` Otavio Salvador
2012-12-21 16:59 ` [U-Boot] [PATCH 8/9] mx6qsabrelite: " Otavio Salvador
2012-12-21 16:59 ` [U-Boot] [PATCH 9/9] mx6qsabre{auto, sd}: " Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50DADC6D.3080201@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox