[U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()

[Stefano Babic <sbabic@denx.de>]

On 27/12/2012 17:27, Albert ARIBAUD wrote:
> Hi Stefano,
> 

Hi Albert,

>> I am playing a bit, I do not see your problem. I admit I have no idea
>> which dialog version is on my board.
>>
>> The only issue I can see is with MMC - I see with "fatls" any entry twice:
>>
>> MX53LOCO U-Boot > fatls mmc 0:2
>>         1   cmdline
>>         1   cmdline
>>    283472   u-boot.bin
>>    283472   u-boot.bin
>>    284496   u-boot.imx
>>    284496   u-boot.imx
>>   4093544   uimage
>>   4093544   uimage
>>    160291   uinitrd
>>    160291   uinitrd
>>       349   boot.txt
>>       349   boot.txt
>>       421   boot.scr
>>       421   boot.scr
>>
>> But this is surely another issue....
> 
> Re the double entries, did you check if these could be short / DOS (8.3)
> names vs long names? IIRC, for compatibility, in a (V)FAT directory any
> entry with a name longer than 8.3 has a matching short entry; maybe on
> the device you're ls'ing, *any* entry has a short version?

That is the point. I tested with another SD-Card, putting also long
names, and I get:

     614   loadbootscr.scr
      614   loadbo~1.scr
  2606096   swupdate-image-thb.ext3.gz.u-boot
  2606096   swupda~1.u-b
  3893896   uimage-thb.bin
  3893896   uimage~1.bin

There is an entry for long name and one for short name. And with the
other SD, all entries has a short version. Simply I do not remember I
have already seen the double entries in the past..

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================