[U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor

[Jaehoon Chung <jh80.chung@samsung.com>]

Hi Amar,

On 12/31/2012 07:58 PM, Amar wrote:
> This API computes the divisor value based on MPLL clock and
> writes it into the FSYS1 register.
> 
> Changes from V1:
> 	1)Updated the function exynos5_mmc_set_clk_div() to receive
> 	'device_i'd as input parameter instead of 'index'.
> 
> Changes from V2:
> 	1)Updation of commit message and resubmition of proper patch set.
> 
> Signed-off-by: Amar <amarendra.xt@samsung.com>
> ---
>  arch/arm/cpu/armv7/exynos/clock.c      | 38 ++++++++++++++++++++++++++++++++--
>  arch/arm/include/asm/arch-exynos/clk.h |  4 ++++
>  2 files changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
> index 973b84e..cd42689 100644
> --- a/arch/arm/cpu/armv7/exynos/clock.c
> +++ b/arch/arm/cpu/armv7/exynos/clock.c
> @@ -490,7 +490,7 @@ static unsigned long exynos4_get_mmc_clk(int dev_index)
>  		(struct exynos4_clock *)samsung_get_base_clock();
>  	unsigned long uclk, sclk;
>  	unsigned int sel, ratio, pre_ratio;
> -	int shift;
> +	int shift = 0;
>  
>  	sel = readl(&clk->src_fsys);
>  	sel = (sel >> (dev_index << 2)) & 0xf;
> @@ -539,7 +539,7 @@ static unsigned long exynos5_get_mmc_clk(int dev_index)
>  		(struct exynos5_clock *)samsung_get_base_clock();
>  	unsigned long uclk, sclk;
>  	unsigned int sel, ratio, pre_ratio;
> -	int shift;
> +	int shift = 0;
>  
>  	sel = readl(&clk->src_fsys);
>  	sel = (sel >> (dev_index << 2)) & 0xf;
> @@ -659,6 +659,40 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div)
>  	writel(val, addr);
>  }
>  
> +/* exynos5: set the mmc clock div ratio in fsys1 */
> +int exynos5_mmc_set_clk_div(int dev_id)
Why return the int type?
> +{
> +	struct exynos5_clock *clk =
> +		(struct exynos5_clock *)samsung_get_base_clock();
> +	unsigned int addr;
> +	unsigned int clock;
> +	unsigned int tmp;
> +	unsigned int i;
Can't use unsigned int addr, clock....? We can save the line.
> +
> +	/* get mpll clock */
> +	clock = get_pll_clk(MPLL) / 1000000;
> +
> +	/*
> +	 * CLK_DIV_FSYS1
> +	 * MMC0_PRE_RATIO [15:8], MMC0_RATIO [3:0]
> +	 * CLK_DIV_FSYS2
> +	 * MMC2_PRE_RATIO [15:8], MMC2_RATIO [3:0]
> +	 */
> +	if (dev_id <= PERIPH_ID_SDMMC1)
> +		addr = (unsigned int)&clk->div_fsys1;
> +	else
> +		addr = (unsigned int)&clk->div_fsys2;
> +
> +	tmp = readl(addr) & ~FSYS1_MMC0_DIV_MASK;
FSYS1_MMC0_DIV_MASK? then case of MMC2?
It is wrong macro name..You also used the clk->div_fsys2..
> +	for (i = 0; i <= 0xf; i++) {
> +		if ((clock / (i + 1)) <= 400) {
> +			writel(tmp | i << 0, addr);
> +			break;
> +		}
> +	}
> +	return 0;
> +}
I didn't understand this function(exynos5_mmc_set_clk_div?).
What purpose? I think good that proper to use the "div" as argument.
void exynos5_mmc_set_clk(int dev_id, unsigned int div).
> +
>  /* get_lcd_clk: return lcd clock frequency */
>  static unsigned long exynos4_get_lcd_clk(void)
>  {
> diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
> index 1935b0b..2fd7c3e 100644
> --- a/arch/arm/include/asm/arch-exynos/clk.h
> +++ b/arch/arm/include/asm/arch-exynos/clk.h
> @@ -29,6 +29,9 @@
>  #define VPLL	4
>  #define BPLL	5
>  
> +#define FSYS1_MMC0_DIV_MASK	0xff0f
> +#define FSYS1_MMC0_DIV_VAL	0x0701
> +
>  unsigned long get_pll_clk(int pllreg);
>  unsigned long get_arm_clk(void);
>  unsigned long get_i2c_clk(void);
> @@ -36,6 +39,7 @@ unsigned long get_pwm_clk(void);
>  unsigned long get_uart_clk(int dev_index);
>  unsigned long get_mmc_clk(int dev_index);
>  void set_mmc_clk(int dev_index, unsigned int div);
> +int exynos5_mmc_set_clk_div(int dev_index);
>  unsigned long get_lcd_clk(void);
>  void set_lcd_clk(void);
>  void set_mipi_clk(void);
>