From mboxrd@z Thu Jan 1 00:00:00 1970 From: Troy Kisky Date: Thu, 03 Jan 2013 15:00:10 -0700 Subject: [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet In-Reply-To: <1350960047-23404-1-git-send-email-troy.kisky@boundarydevices.com> References: <1345502918-18305-1-git-send-email-troy.kisky@boundarydevices.com> <1350960047-23404-1-git-send-email-troy.kisky@boundarydevices.com> Message-ID: <50E5FF6A.7080805@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/22/2012 7:40 PM, Troy Kisky wrote: > This series tries to separate the mii regsisters > from the ethernet registers as suggested by > Andy Fleming. Then, mx6qsabrelite is changed > to find the phy address from the possibles 4-7. > > The V3 series is very different from V2. > > Troy Kisky (9): > doc/README.fec_mxc: add documentation > net: fec_mxc: delete CONFIG_FEC_MXC_MULTI > net: fec_mxc: change fec_mii_setspeed parameter > net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi > phy: add phy_find_by_mask/phy_connect_dev > net: fec_mxc: use fec_set_dev_name to set name > net: fec_mxc: only call phy_connect in fec_probe > net: fec_mxc: get phydev before fec_probe > mx6qsabrelite: search mii phy address 4-7 > > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +++- > doc/README.fec_mxc | 27 ++++ > drivers/net/fec_mxc.c | 164 ++++++++++++++----------- > drivers/net/fec_mxc.h | 2 +- > drivers/net/phy/phy.c | 128 +++++++++++-------- > include/configs/m28evk.h | 1 - > include/configs/mx28evk.h | 1 - > include/configs/sc_sps_1.h | 1 - > include/netdev.h | 7 ++ > include/phy.h | 3 + > 10 files changed, 227 insertions(+), 131 deletions(-) > create mode 100644 doc/README.fec_mxc > Ping on this series.... Is there anything I need to fix? Thanks Troy