From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 04 Jan 2013 10:08:24 +0100 Subject: [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board In-Reply-To: <20121231002205.GA31816@S2101-09.ap.freescale.net> References: <1356912900-32228-1-git-send-email-shawn.guo@linaro.org> <20121231002205.GA31816@S2101-09.ap.freescale.net> Message-ID: <50E69C08.6090300@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 31/12/2012 01:22, Shawn Guo wrote: > On Mon, Dec 31, 2012 at 08:14:57AM +0800, Shawn Guo wrote: >> The series is to enable the use of eMMC on mx6qsabresd board, so that >> we do not need to carry an external card to boot the board. The DDR >> mode support for eMMC is not included. >> Hi Shawn, >> Shawn Guo (3): >> fsl_esdhc: add MMC_MODE_HC host_caps >> mx6qsabresd: add usdhc2 and usdhc4 support >> mx6qsabresd: use on-board eMMC to store environment >> > Forgot adding [U-Boot] prefix for these patches. Will do next time. Never mind - and nobody adds [U-Boot] to a patch. I think it is added automatically by the mailing list server. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================