From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Date: Fri, 04 Jan 2013 19:27:05 +0900 [thread overview]
Message-ID: <50E6AE79.2080006@samsung.com> (raw)
In-Reply-To: <1357292050-12137-8-git-send-email-amarendra.xt@samsung.com>
Hi Amar,
I wonder that include the moviNAND specific code in mmc.c?
mmc_boot_partiton_size_change() looks like every vendor can use this function.
Best Regards,
Jaehoon Chung
On 01/04/2013 06:34 PM, Amar wrote:
> This patch adds APIs to open, close and to resize boot partiton for EMMC.
>
> Changes from V1:
> New patch.
>
> Changes from V2:
> 1)Updation of commit message and resubmition of proper patch set.
>
> Changes from V3:
> No change.
>
> Signed-off-by: Amar <amarendra.xt@samsung.com>
> ---
> drivers/mmc/mmc.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/mmc.h | 16 ++++++++
> 2 files changed, 134 insertions(+)
>
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 72e8ce6..8175b49 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -1327,3 +1327,121 @@ int mmc_initialize(bd_t *bis)
>
> return 0;
> }
> +
> +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
> + unsigned long rpmbsize)
> +{
> + int err;
> + struct mmc_cmd cmd;
> +
> + /* Only use this command for raw EMMC moviNAND */
> + /* Enter backdoor mode */
> + cmd.cmdidx = MMC_CMD_RES_MAN;
> + cmd.resp_type = MMC_RSP_R1b;
> + cmd.cmdarg = MMC_CMD62_ARG1;
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
> + return err;
> + }
> +
> + /* Boot partition changing mode */
> + cmd.cmdidx = MMC_CMD_RES_MAN;
> + cmd.resp_type = MMC_RSP_R1b;
> + cmd.cmdarg = MMC_CMD62_ARG2;
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
> + return err;
> + }
> + /* boot partition size is multiple of 128KB */
> + bootsize = ((bootsize*1024)/128);
> +
> + /* Arg: boot partition size */
> + cmd.cmdidx = MMC_CMD_RES_MAN;
> + cmd.resp_type = MMC_RSP_R1b;
> + cmd.cmdarg = bootsize;
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
> + return err;
> + }
> + /* RPMB partition size is multiple of 128KB */
> + rpmbsize = ((rpmbsize*1024)/128);
> + /* Arg: RPMB partition size */
> + cmd.cmdidx = MMC_CMD_RES_MAN;
> + cmd.resp_type = MMC_RSP_R1b;
> + cmd.cmdarg = rpmbsize;
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
> + return err;
> + }
> + return 0;
> +}
> +
> +int mmc_boot_open(struct mmc *mmc)
> +{
> + int err;
> + struct mmc_cmd cmd;
> +
> + /* Boot ack enable, boot partition enable , boot partition access */
> + cmd.cmdidx = MMC_CMD_SWITCH;
> + cmd.resp_type = MMC_RSP_R1b;
> +
> + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24 |
> + EXT_CSD_PART_CONF << 16 |
> + (EXT_CSD_BOOT_ACK_ENABLE |
> + EXT_CSD_BOOT_PARTITION_ENABLE |
> + EXT_CSD_PARTITION_ACCESS_ENABLE) << 8);
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_open: Error1 = %d\n", err);
> + return err;
> + }
> +
> + /* 4bit transfer mode at booting time. */
> + cmd.cmdidx = MMC_CMD_SWITCH;
> + cmd.resp_type = MMC_RSP_R1b;
> +
> + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24|
> + EXT_CSD_BOOT_BUS_WIDTH << 16|
> + ((1<<0) << 8));
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_open: Error2 = %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +int mmc_boot_close(struct mmc *mmc)
> +{
> + int err;
> + struct mmc_cmd cmd;
> +
> + /* Boot ack enable, boot partition enable , boot partition access */
> + cmd.cmdidx = MMC_CMD_SWITCH;
> + cmd.resp_type = MMC_RSP_R1b;
> +
> + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24|
> + EXT_CSD_PART_CONF << 16|
> + (EXT_CSD_BOOT_ACK_ENABLE |
> + EXT_CSD_BOOT_PARTITION_ENABLE |
> + EXT_CSD_PARTITION_ACCESS_DISABLE) << 8);
> +
> + err = mmc_send_cmd(mmc, &cmd, NULL);
> + if (err) {
> + debug("mmc_boot_close: Error = %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> diff --git a/include/mmc.h b/include/mmc.h
> index a13e2bd..999f0a3 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -86,6 +86,11 @@
> #define MMC_CMD_APP_CMD 55
> #define MMC_CMD_SPI_READ_OCR 58
> #define MMC_CMD_SPI_CRC_ON_OFF 59
> +#define MMC_CMD_RES_MAN 62
> +
> +#define MMC_CMD62_ARG1 0xefac62ec
> +#define MMC_CMD62_ARG2 0xcbaea7
> +
>
> #define SD_CMD_SEND_RELATIVE_ADDR 3
> #define SD_CMD_SWITCH_FUNC 6
> @@ -153,6 +158,7 @@
> */
> #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
> #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
> +#define EXT_CSD_BOOT_BUS_WIDTH 177
> #define EXT_CSD_PART_CONF 179 /* R/W */
> #define EXT_CSD_BUS_WIDTH 183 /* R/W */
> #define EXT_CSD_HS_TIMING 185 /* R/W */
> @@ -177,6 +183,12 @@
> #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
> #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
>
> +#define EXT_CSD_BOOT_ACK_ENABLE (1<<6)
> +#define EXT_CSD_BOOT_PARTITION_ENABLE (1<<3)
> +#define EXT_CSD_PARTITION_ACCESS_ENABLE (1<<0)
> +#define EXT_CSD_PARTITION_ACCESS_DISABLE (0<<0)
> +
> +
> #define R1_ILLEGAL_COMMAND (1 << 22)
> #define R1_APP_CMD (1 << 5)
>
> @@ -275,6 +287,10 @@ int board_mmc_getcd(struct mmc *mmc);
> int mmc_switch_part(int dev_num, unsigned int part_num);
> int mmc_getcd(struct mmc *mmc);
> void spl_mmc_load(void) __noreturn;
> +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
> + unsigned long rpmbsize);
> +int mmc_boot_open(struct mmc *mmc);
> +int mmc_boot_close(struct mmc *mmc);
>
> #ifdef CONFIG_GENERIC_MMC
> #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
>
next prev parent reply other threads:[~2013-01-04 10:27 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 9:34 [U-Boot] [PATCH V4 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and Amar
2013-01-04 9:34 ` [U-Boot] [PATCH V4 1/9] FDT: Add compatible string for DWMMC Amar
2013-01-04 9:34 ` [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data Amar
2013-01-10 15:21 ` Simon Glass
2013-01-15 9:11 ` Amarendra Reddy
2013-01-04 9:34 ` [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues Amar
2013-01-10 15:26 ` Simon Glass
2013-01-11 4:01 ` Jaehoon Chung
2013-01-11 5:43 ` Simon Glass
2013-01-15 8:26 ` Amarendra Reddy
2013-01-04 9:34 ` [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC Amar
2013-01-10 15:33 ` Simon Glass
2013-01-11 4:12 ` Jaehoon Chung
2013-01-11 5:44 ` Simon Glass
2013-01-11 13:06 ` Amarendra Reddy
2013-01-22 5:23 ` Joonyoung Shim
2013-01-22 6:41 ` Amarendra Reddy
2013-01-04 9:34 ` [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor Amar
2013-01-10 15:35 ` Simon Glass
2013-01-11 3:52 ` Jaehoon Chung
2013-01-11 13:23 ` Amarendra Reddy
2013-01-11 14:28 ` Simon Glass
2013-01-04 9:34 ` [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT Amar
2013-01-10 16:57 ` Simon Glass
2013-01-11 17:58 ` Amarendra Reddy
2013-01-12 16:41 ` Simon Glass
2013-01-15 9:16 ` Amarendra Reddy
2013-01-04 9:34 ` [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition Amar
2013-01-04 10:27 ` Jaehoon Chung [this message]
2013-01-07 4:19 ` Amarendra Reddy
2013-01-07 4:34 ` Jaehoon Chung
2013-01-07 5:54 ` Amarendra Reddy
2013-01-07 9:23 ` Jaehoon Chung
2013-01-04 9:34 ` [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting Amar
2013-01-10 16:39 ` Simon Glass
2013-01-15 9:14 ` Amarendra Reddy
2013-01-04 9:34 ` [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to Amar
2013-01-10 16:46 ` Simon Glass
2013-01-11 3:54 ` Jaehoon Chung
2013-01-11 5:41 ` Simon Glass
2013-01-11 13:50 ` Amarendra Reddy
2013-01-11 14:31 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50E6AE79.2080006@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox