* [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting
2013-01-09 11:57 [U-Boot] [PATCH v5 0/6] Improve default environment for easy use Otavio Salvador
@ 2013-01-09 11:57 ` Otavio Salvador
2013-01-09 12:10 ` Liu Hui-R64343
2013-01-09 11:57 ` [U-Boot] [PATCH v5 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type Otavio Salvador
` (4 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Otavio Salvador @ 2013-01-09 11:57 UTC (permalink / raw)
To: u-boot
This rework the environment to use tabs for environment setting as
done in other boards.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- New patch
include/configs/mx6qsabrelite.h | 66 +++++++++++++++++++--------------------
1 file changed, 33 insertions(+), 33 deletions(-)
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 0f6bbb4..ee86f9b 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -152,43 +152,43 @@
#define CONFIG_SYS_TEXT_BASE 0x17800000
#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "uimage=uImage\0" \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
"console=ttymxc1\0" \
- "fdt_high=0xffffffff\0" \
+ "fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "mmcdev=0\0" \
- "mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootm\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "mmcdev=0\0" \
+ "mmcpart=2\0" \
+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "dhcp ${uimage}; bootm\0"
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
+ "mmc dev ${mmcdev};" \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
#define CONFIG_ARP_TIMEOUT 200UL
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting
2013-01-09 11:57 ` [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting Otavio Salvador
@ 2013-01-09 12:10 ` Liu Hui-R64343
0 siblings, 0 replies; 12+ messages in thread
From: Liu Hui-R64343 @ 2013-01-09 12:10 UTC (permalink / raw)
To: u-boot
>-----Original Message-----
From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>On Behalf Of Otavio Salvador
>Sent: Wednesday, January 09, 2013 7:58 PM
>To: U-Boot Mailing List
>Cc: Estevam Fabio-R49496; Otavio Salvador
>Subject: [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment
>setting
>
>This rework the environment to use tabs for environment setting as done in
>other boards.
>
>Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
>---
>Changes in v5: None
>Changes in v4: None
>Changes in v3: None
>Changes in v2:
>- New patch
>
> include/configs/mx6qsabrelite.h | 66 +++++++++++++++++++--------------------
> 1 file changed, 33 insertions(+), 33 deletions(-)
Acked-by: Jason Liu <r64343@freescale.com>
>
>diff --git a/include/configs/mx6qsabrelite.h
>b/include/configs/mx6qsabrelite.h index 0f6bbb4..ee86f9b 100644
>--- a/include/configs/mx6qsabrelite.h
>+++ b/include/configs/mx6qsabrelite.h
>@@ -152,43 +152,43 @@
> #define CONFIG_SYS_TEXT_BASE 0x17800000
>
> #define CONFIG_EXTRA_ENV_SETTINGS \
>- "script=boot.scr\0" \
>- "uimage=uImage\0" \
>+ "script=boot.scr\0" \
>+ "uimage=uImage\0" \
> "console=ttymxc1\0" \
>- "fdt_high=0xffffffff\0" \
>+ "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
>- "mmcdev=0\0" \
>- "mmcpart=2\0" \
>- "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
>- "mmcargs=setenv bootargs console=${console},${baudrate} " \
>- "root=${mmcroot}\0" \
>- "loadbootscript=" \
>- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>- "bootscript=echo Running bootscript from mmc ...; " \
>- "source\0" \
>- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>${uimage}\0" \
>- "mmcboot=echo Booting from mmc ...; " \
>- "run mmcargs; " \
>- "bootm\0" \
>- "netargs=setenv bootargs console=${console},${baudrate} " \
>- "root=/dev/nfs " \
>- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
>- "netboot=echo Booting from net ...; " \
>- "run netargs; " \
>- "dhcp ${uimage}; bootm\0" \
>+ "mmcdev=0\0" \
>+ "mmcpart=2\0" \
>+ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
>+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
>+ "root=${mmcroot}\0" \
>+ "loadbootscript=" \
>+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0"
>\
>+ "bootscript=echo Running bootscript from mmc ...; " \
>+ "source\0" \
>+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>${uimage}\0" \
>+ "mmcboot=echo Booting from mmc ...; " \
>+ "run mmcargs; " \
>+ "bootm\0" \
>+ "netargs=setenv bootargs console=${console},${baudrate} " \
>+ "root=/dev/nfs " \
>+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
>+ "netboot=echo Booting from net ...; " \
>+ "run netargs; " \
>+ "dhcp ${uimage}; bootm\0"
>
> #define CONFIG_BOOTCOMMAND \
>- "mmc dev ${mmcdev};" \
>- "mmc dev ${mmcdev}; if mmc rescan; then " \
>- "if run loadbootscript; then " \
>- "run bootscript; " \
>- "else " \
>- "if run loaduimage; then " \
>- "run mmcboot; " \
>- "else run netboot; " \
>- "fi; " \
>- "fi; " \
>- "else run netboot; fi"
>+ "mmc dev ${mmcdev};" \
>+ "mmc dev ${mmcdev}; if mmc rescan; then " \
>+ "if run loadbootscript; then " \
>+ "run bootscript; " \
>+ "else " \
>+ "if run loaduimage; then " \
>+ "run mmcboot; " \
>+ "else run netboot; " \
>+ "fi; " \
>+ "fi; " \
>+ "else run netboot; fi"
>
> #define CONFIG_ARP_TIMEOUT 200UL
>
>--
>1.7.10.4
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v5 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
2013-01-09 11:57 [U-Boot] [PATCH v5 0/6] Improve default environment for easy use Otavio Salvador
2013-01-09 11:57 ` [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting Otavio Salvador
@ 2013-01-09 11:57 ` Otavio Salvador
2013-01-09 11:57 ` [U-Boot] [PATCH v5 3/6] mx28evk: Add support to dynamically choose between fdt use or not Otavio Salvador
` (3 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Otavio Salvador @ 2013-01-09 11:57 UTC (permalink / raw)
To: u-boot
For a generic environment, we shouldn't have a fixed rootfs filesystem
so we drop it from env.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- reformat environment change to fit in 80 cols
include/configs/mx28evk.h | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 8b89b25..ac9522f 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -292,11 +292,9 @@
"console_mainline=ttyAMA0\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
- "mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
+ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
+ "mmcargs=setenv bootargs console=${console_mainline},${baudrate} "
+ "root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 3/6] mx28evk: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 [U-Boot] [PATCH v5 0/6] Improve default environment for easy use Otavio Salvador
2013-01-09 11:57 ` [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting Otavio Salvador
2013-01-09 11:57 ` [U-Boot] [PATCH v5 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type Otavio Salvador
@ 2013-01-09 11:57 ` Otavio Salvador
2013-01-09 11:57 ` [U-Boot] [PATCH v5 4/6] mx53loco: " Otavio Salvador
` (2 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Otavio Salvador @ 2013-01-09 11:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Changes in v5:
- Change subject
- Reword the warning
Changes in v4:
- Use a warning, instead of error when failing to fetch fdt
- Drop exit use
- Fix netboot
- Use fdt instead of ftd
Changes in v3:
- Add loadfdt
- Use loadfdt
- Call exit to abort script
Changes in v2:
- Allow use of dynamic/static ip
- Allow force use, or not, of fdt
- Change 'auto' to 'try'
include/configs/mx28evk.h | 39 +++++++++++++++++++++++++++++++++++++--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index ac9522f..4a95156 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -290,6 +290,10 @@
"uimage=uImage\0" \
"console_fsl=ttyAM0\0" \
"console_mainline=ttyAMA0\0" \
+ "fdt_file=imx28-evk.dtb\0" \
+ "fdt_addr=0x41000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
@@ -300,15 +304,46 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
+ "if test ${boot_fdt} = yes; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0"
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi;" \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 [U-Boot] [PATCH v5 0/6] Improve default environment for easy use Otavio Salvador
` (2 preceding siblings ...)
2013-01-09 11:57 ` [U-Boot] [PATCH v5 3/6] mx28evk: Add support to dynamically choose between fdt use or not Otavio Salvador
@ 2013-01-09 11:57 ` Otavio Salvador
2013-01-09 12:12 ` Liu Hui-R64343
2013-01-09 18:21 ` Stefano Babic
2013-01-09 11:57 ` [U-Boot] [PATCH v5 5/6] mx6qsabrelite: " Otavio Salvador
2013-01-09 11:58 ` [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: " Otavio Salvador
5 siblings, 2 replies; 12+ messages in thread
From: Otavio Salvador @ 2013-01-09 11:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Changes in v5:
- Change subject
- Reword the warning
Changes in v4:
- Use a warning, instead of error when failing to fetch fdt
- Drop exit use
- Fix netboot
- Use fdt instead of ftd
Changes in v3:
- Add loadfdt
- Use loadfdt
- Call exit to abort script
Changes in v2:
- Allow use of dynamic/static ip
- Allow force use, or not, of fdt
- Change 'auto' to 'try'
include/configs/mx53loco.h | 40 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 996396b..cbc3a82 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -119,6 +119,10 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"uimage=uImage\0" \
+ "fdt_file=imx53-qsb.dtb\0" \
+ "fdt_addr=0x71000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
@@ -128,15 +132,47 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
+ "if test ${boot_fdt} = yes; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo ERROR: Cannot load the DT; " \
+ "exit; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 ` [U-Boot] [PATCH v5 4/6] mx53loco: " Otavio Salvador
@ 2013-01-09 12:12 ` Liu Hui-R64343
2013-01-09 18:21 ` Stefano Babic
1 sibling, 0 replies; 12+ messages in thread
From: Liu Hui-R64343 @ 2013-01-09 12:12 UTC (permalink / raw)
To: u-boot
>-----Original Message-----
From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>On Behalf Of Otavio Salvador
>Sent: Wednesday, January 09, 2013 7:58 PM
>To: U-Boot Mailing List
>Cc: Estevam Fabio-R49496; Otavio Salvador
>Subject: [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically
>choose between fdt use or not
>
>Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
>---
>Changes in v5:
>- Change subject
>- Reword the warning
>
>Changes in v4:
>- Use a warning, instead of error when failing to fetch fdt
>- Drop exit use
>- Fix netboot
>- Use fdt instead of ftd
>
>Changes in v3:
>- Add loadfdt
>- Use loadfdt
>- Call exit to abort script
>
>Changes in v2:
>- Allow use of dynamic/static ip
>- Allow force use, or not, of fdt
>- Change 'auto' to 'try'
>
> include/configs/mx53loco.h | 40
>++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 38 insertions(+), 2 deletions(-)
Acked-by: Jason Liu <r64343@freescale.com>
>
>diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index
>996396b..cbc3a82 100644
>--- a/include/configs/mx53loco.h
>+++ b/include/configs/mx53loco.h
>@@ -119,6 +119,10 @@
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "uimage=uImage\0" \
>+ "fdt_file=imx53-qsb.dtb\0" \
>+ "fdt_addr=0x71000000\0" \
>+ "boot_fdt=try\0" \
>+ "ip_dyn=yes\0" \
> "mmcdev=0\0" \
> "mmcpart=2\0" \
> "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ @@ -128,15 +132,47
>@@
> "bootscript=echo Running bootscript from mmc ...; " \
> "source\0" \
> "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>${uimage}\0" \
>+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
>${fdt_file}\0" \
> "mmcboot=echo Booting from mmc ...; " \
> "run mmcargs; " \
>- "bootm\0" \
>+ "if test ${boot_fdt} = yes; then " \
>+ "if run loadfdt; then " \
>+ "bootm ${loadaddr} - ${fdt_addr}; " \
>+ "else " \
>+ "if test ${boot_fdt} = try; then " \
>+ "bootm; " \
>+ "else " \
>+ "echo WARN: Cannot load the DT; " \
>+ "fi; " \
>+ "fi; " \
>+ "else " \
>+ "bootm; " \
>+ "fi;\0" \
> "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
> "root=/dev/nfs " \
> "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> "netboot=echo Booting from net ...; " \
> "run netargs; " \
>- "dhcp ${uimage}; bootm\0" \
>+ "if test ${ip_dyn} = yes; then " \
>+ "setenv get_cmd dhcp; " \
>+ "else " \
>+ "setenv get_cmd tftp; " \
>+ "fi; " \
>+ "${get_cmd} ${uimage}; " \
>+ "if test ${boot_fdt} = yes; then " \
>+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
>+ "bootm ${loadaddr} - ${fdt_addr}; " \
>+ "else " \
>+ "if test ${boot_fdt} = try; then " \
>+ "bootm; " \
>+ "else " \
>+ "echo ERROR: Cannot load the DT; " \
>+ "exit; " \
>+ "fi; " \
>+ "fi; " \
>+ "else " \
>+ "bootm; " \
>+ "fi;\0"
>
> #define CONFIG_BOOTCOMMAND \
> "mmc dev ${mmcdev}; if mmc rescan; then " \
>--
>1.7.10.4
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 ` [U-Boot] [PATCH v5 4/6] mx53loco: " Otavio Salvador
2013-01-09 12:12 ` Liu Hui-R64343
@ 2013-01-09 18:21 ` Stefano Babic
1 sibling, 0 replies; 12+ messages in thread
From: Stefano Babic @ 2013-01-09 18:21 UTC (permalink / raw)
To: u-boot
On 09/01/2013 12:57, Otavio Salvador wrote:
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
Hi Otavio,
> Changes in v5:
> - Change subject
> - Reword the warning
>
> Changes in v4:
> - Use a warning, instead of error when failing to fetch fdt
> - Drop exit use
> - Fix netboot
> - Use fdt instead of ftd
>
> Changes in v3:
> - Add loadfdt
> - Use loadfdt
> - Call exit to abort script
>
> Changes in v2:
> - Allow use of dynamic/static ip
> - Allow force use, or not, of fdt
> - Change 'auto' to 'try'
>
I get some problems:
- loadbootscript is not correctly set. In fact:
env default -f -a
## Resetting to default environment
MX53LOCO U-Boot > pri mmcargs
mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}
loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
There is still a '0' missing for mmcargs, and loadbootscript is not set.
Then there is a problem with netboot. It is set correctly, but "pri
netboot" crashes:
pri netboot
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes;
then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd}
${uimage}; if test ${boot_fdt} = yes; then if ${get_cmd} ${fdt_addr}
${fdt_file}; then bootm ${loadaddr} - ${fdt_addr}; else if test
${boot_fdt} = try; then bootm; else echo ERROR: Cannot load the DT;
exit; fi; fi; else bootm; fi;
prefetch abort
pc : [<203b6d78>] lr : [<203b6d74>]
sp : af565e00 ip : 00000000 fp : 00000000
r10: 00000002 r9 : 00000000 r8 : af565f58
r7 : af568c7c r6 : 00000001 r5 : 00000000 r4 : 6f6f6220
r3 : 00000083 r2 : 00000060 r1 : af565cc0 r0 : 00000173
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
Then I do not understand the boot_fdt when set to try. I have imagined
that it tries to start a DT kernel, and if no fdt find is found, it
tries with a legacy kernel without fdt. But it does not try to load the
FDT file, because this is done only when boot_fdt = yes. When boot_fdt =
try, it starts always a legacy kernel.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 [U-Boot] [PATCH v5 0/6] Improve default environment for easy use Otavio Salvador
` (3 preceding siblings ...)
2013-01-09 11:57 ` [U-Boot] [PATCH v5 4/6] mx53loco: " Otavio Salvador
@ 2013-01-09 11:57 ` Otavio Salvador
2013-01-09 12:11 ` Liu Hui-R64343
2013-01-09 11:58 ` [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: " Otavio Salvador
5 siblings, 1 reply; 12+ messages in thread
From: Otavio Salvador @ 2013-01-09 11:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Changes in v5:
- Change subject
- Reword the warning
Changes in v4:
- Use a warning, instead of error when failing to fetch fdt
- Drop exit use
- Fix netboot
- Use fdt instead of ftd
Changes in v3:
- Add loadfdt
- Use loadfdt
- Call exit to abort script
Changes in v2:
- Allow use of dynamic/static ip
- Allow force use, or not, of fdt
- Change 'auto' to 'try'
include/configs/mx6qsabrelite.h | 39 +++++++++++++++++++++++++++++++++++++--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index ee86f9b..fbcab2f 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -157,6 +157,10 @@
"console=ttymxc1\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
+ "fdt_file=imx6q-sabrelite.dtb\0" \
+ "fdt_addr=0x11000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
@@ -167,15 +171,46 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
+ "if test ${boot_fdt} = yes; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0"
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 ` [U-Boot] [PATCH v5 5/6] mx6qsabrelite: " Otavio Salvador
@ 2013-01-09 12:11 ` Liu Hui-R64343
0 siblings, 0 replies; 12+ messages in thread
From: Liu Hui-R64343 @ 2013-01-09 12:11 UTC (permalink / raw)
To: u-boot
>-----Original Message-----
From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>On Behalf Of Otavio Salvador
>Sent: Wednesday, January 09, 2013 7:58 PM
>To: U-Boot Mailing List
>Cc: Estevam Fabio-R49496; Otavio Salvador
>Subject: [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically
>choose between fdt use or not
>
>Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
>---
>Changes in v5:
>- Change subject
>- Reword the warning
>
>Changes in v4:
>- Use a warning, instead of error when failing to fetch fdt
>- Drop exit use
>- Fix netboot
>- Use fdt instead of ftd
>
>Changes in v3:
>- Add loadfdt
>- Use loadfdt
>- Call exit to abort script
>
>Changes in v2:
>- Allow use of dynamic/static ip
>- Allow force use, or not, of fdt
>- Change 'auto' to 'try'
>
> include/configs/mx6qsabrelite.h | 39
>+++++++++++++++++++++++++++++++++++++--
> 1 file changed, 37 insertions(+), 2 deletions(-)
Acked-by: Jason Liu <r64343@freescale.com>
>
>diff --git a/include/configs/mx6qsabrelite.h
>b/include/configs/mx6qsabrelite.h index ee86f9b..fbcab2f 100644
>--- a/include/configs/mx6qsabrelite.h
>+++ b/include/configs/mx6qsabrelite.h
>@@ -157,6 +157,10 @@
> "console=ttymxc1\0" \
> "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
>+ "fdt_file=imx6q-sabrelite.dtb\0" \
>+ "fdt_addr=0x11000000\0" \
>+ "boot_fdt=try\0" \
>+ "ip_dyn=yes\0" \
> "mmcdev=0\0" \
> "mmcpart=2\0" \
> "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ @@ -167,15 +171,46
>@@
> "bootscript=echo Running bootscript from mmc ...; " \
> "source\0" \
> "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>${uimage}\0" \
>+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
>${fdt_file}\0" \
> "mmcboot=echo Booting from mmc ...; " \
> "run mmcargs; " \
>- "bootm\0" \
>+ "if test ${boot_fdt} = yes; then " \
>+ "if run loadfdt; then " \
>+ "bootm ${loadaddr} - ${fdt_addr}; " \
>+ "else " \
>+ "if test ${boot_fdt} = try; then " \
>+ "bootm; " \
>+ "else " \
>+ "echo WARN: Cannot load the DT; " \
>+ "fi; " \
>+ "fi; " \
>+ "else " \
>+ "bootm; " \
>+ "fi;\0" \
> "netargs=setenv bootargs console=${console},${baudrate} " \
> "root=/dev/nfs " \
> "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> "netboot=echo Booting from net ...; " \
> "run netargs; " \
>- "dhcp ${uimage}; bootm\0"
>+ "if test ${ip_dyn} = yes; then " \
>+ "setenv get_cmd dhcp; " \
>+ "else " \
>+ "setenv get_cmd tftp; " \
>+ "fi; " \
>+ "${get_cmd} ${uimage}; " \
>+ "if test ${boot_fdt} = yes; then " \
>+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
>+ "bootm ${loadaddr} - ${fdt_addr}; " \
>+ "else " \
>+ "if test ${boot_fdt} = try; then " \
>+ "bootm; " \
>+ "else " \
>+ "echo WARN: Cannot load the DT; " \
>+ "fi; " \
>+ "fi; " \
>+ "else " \
>+ "bootm; " \
>+ "fi;\0"
>
> #define CONFIG_BOOTCOMMAND \
> "mmc dev ${mmcdev};" \
>--
>1.7.10.4
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
2013-01-09 11:57 [U-Boot] [PATCH v5 0/6] Improve default environment for easy use Otavio Salvador
` (4 preceding siblings ...)
2013-01-09 11:57 ` [U-Boot] [PATCH v5 5/6] mx6qsabrelite: " Otavio Salvador
@ 2013-01-09 11:58 ` Otavio Salvador
2013-01-09 12:12 ` Liu Hui-R64343
5 siblings, 1 reply; 12+ messages in thread
From: Otavio Salvador @ 2013-01-09 11:58 UTC (permalink / raw)
To: u-boot
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
Changes in v5:
- Change subject
- Reword the warning
Changes in v4:
- Use a warning, instead of error when failing to fetch fdt
- Drop exit use
- Fix netboot
- Use fdt instead of ftd
Changes in v3:
- Add loadfdt
- Use loadfdt
- Call exit to abort script
Changes in v2:
- Allow use of dynamic/static ip
- Allow force use, or not, of fdt
- Change 'auto' to 'try'
include/configs/mx6qsabre_common.h | 41 +++++++++++++++++++++++++++++++++---
include/configs/mx6qsabreauto.h | 1 +
include/configs/mx6qsabresd.h | 1 +
3 files changed, 40 insertions(+), 3 deletions(-)
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index bd2fb10..0f0e51f 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -83,6 +83,10 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"uimage=uImage\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x11000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"console=" CONFIG_CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
@@ -96,15 +100,46 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "mmcboot=echo Booting from mmc ...; " \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
+ "if test ${boot_fdt} = yes; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index f1ff201..f4a082a 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -15,6 +15,7 @@
#define CONFIG_MACH_TYPE 3529
#define CONFIG_MXC_UART_BASE UART4_BASE
#define CONFIG_CONSOLE_DEV "ttymxc3"
+#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabreauto.dtb"
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
index a1d9285..b64e925 100644
--- a/include/configs/mx6qsabresd.h
+++ b/include/configs/mx6qsabresd.h
@@ -21,6 +21,7 @@
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONSOLE_DEV "ttymxc0"
#define CONFIG_MMCROOT "/dev/mmcblk1p2"
+#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb"
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#include "mx6qsabre_common.h"
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
2013-01-09 11:58 ` [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: " Otavio Salvador
@ 2013-01-09 12:12 ` Liu Hui-R64343
0 siblings, 0 replies; 12+ messages in thread
From: Liu Hui-R64343 @ 2013-01-09 12:12 UTC (permalink / raw)
To: u-boot
>-----Original Message-----
From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>On Behalf Of Otavio Salvador
>Sent: Wednesday, January 09, 2013 7:58 PM
>To: U-Boot Mailing List
>Cc: Estevam Fabio-R49496; Otavio Salvador
>Subject: [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: Add support to
>dynamically choose between fdt use or not
>
>Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
>---
>Changes in v5:
>- Change subject
>- Reword the warning
>
>Changes in v4:
>- Use a warning, instead of error when failing to fetch fdt
>- Drop exit use
>- Fix netboot
>- Use fdt instead of ftd
>
>Changes in v3:
>- Add loadfdt
>- Use loadfdt
>- Call exit to abort script
>
>Changes in v2:
>- Allow use of dynamic/static ip
>- Allow force use, or not, of fdt
>- Change 'auto' to 'try'
>
> include/configs/mx6qsabre_common.h | 41
>+++++++++++++++++++++++++++++++++---
Acked-by: Jason Liu <r64343@freescale.com>
> include/configs/mx6qsabreauto.h | 1 +
> include/configs/mx6qsabresd.h | 1 +
> 3 files changed, 40 insertions(+), 3 deletions(-)
>
>diff --git a/include/configs/mx6qsabre_common.h
>b/include/configs/mx6qsabre_common.h
>index bd2fb10..0f0e51f 100644
>--- a/include/configs/mx6qsabre_common.h
>+++ b/include/configs/mx6qsabre_common.h
>@@ -83,6 +83,10 @@
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "uimage=uImage\0" \
>+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
>+ "fdt_addr=0x11000000\0" \
>+ "boot_fdt=try\0" \
>+ "ip_dyn=yes\0" \
> "console=" CONFIG_CONSOLE_DEV "\0" \
> "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
>@@ -96,15 +100,46 @@
> "bootscript=echo Running bootscript from mmc ...; " \
> "source\0" \
> "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>${uimage}\0" \
>- "mmcboot=echo Booting from mmc ...; " \
>+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
>${fdt_file}\0" \
>+ "mmcboot=echo Booting from mmc ...; " \
> "run mmcargs; " \
>- "bootm\0" \
>+ "if test ${boot_fdt} = yes; then " \
>+ "if run loadfdt; then " \
>+ "bootm ${loadaddr} - ${fdt_addr}; " \
>+ "else " \
>+ "if test ${boot_fdt} = try; then " \
>+ "bootm; " \
>+ "else " \
>+ "echo WARN: Cannot load the DT; " \
>+ "fi; " \
>+ "fi; " \
>+ "else " \
>+ "bootm; " \
>+ "fi;\0" \
> "netargs=setenv bootargs console=${console},${baudrate} " \
> "root=/dev/nfs " \
> "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> "netboot=echo Booting from net ...; " \
> "run netargs; " \
>- "dhcp ${uimage}; bootm\0" \
>+ "if test ${ip_dyn} = yes; then " \
>+ "setenv get_cmd dhcp; " \
>+ "else " \
>+ "setenv get_cmd tftp; " \
>+ "fi; " \
>+ "${get_cmd} ${uimage}; " \
>+ "if test ${boot_fdt} = yes; then " \
>+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
>+ "bootm ${loadaddr} - ${fdt_addr}; " \
>+ "else " \
>+ "if test ${boot_fdt} = try; then " \
>+ "bootm; " \
>+ "else " \
>+ "echo WARN: Cannot load the DT; " \
>+ "fi; " \
>+ "fi; " \
>+ "else " \
>+ "bootm; " \
>+ "fi;\0"
>
> #define CONFIG_BOOTCOMMAND \
> "mmc dev ${mmcdev};" \
>diff --git a/include/configs/mx6qsabreauto.h
>b/include/configs/mx6qsabreauto.h index f1ff201..f4a082a 100644
>--- a/include/configs/mx6qsabreauto.h
>+++ b/include/configs/mx6qsabreauto.h
>@@ -15,6 +15,7 @@
> #define CONFIG_MACH_TYPE 3529
> #define CONFIG_MXC_UART_BASE UART4_BASE
> #define CONFIG_CONSOLE_DEV "ttymxc3"
>+#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabreauto.dtb"
> #define CONFIG_MMCROOT "/dev/mmcblk0p2"
> #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
>
>diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
>index a1d9285..b64e925 100644
>--- a/include/configs/mx6qsabresd.h
>+++ b/include/configs/mx6qsabresd.h
>@@ -21,6 +21,7 @@
> #define CONFIG_MXC_UART_BASE UART1_BASE
> #define CONFIG_CONSOLE_DEV "ttymxc0"
> #define CONFIG_MMCROOT "/dev/mmcblk1p2"
>+#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb"
> #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
>
> #include "mx6qsabre_common.h"
>--
>1.7.10.4
>
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 12+ messages in thread