public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Bo Shen <voice.shen@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/10] common/lcd.c: cleanup use of global variables
Date: Wed, 16 Jan 2013 09:23:08 +0800	[thread overview]
Message-ID: <50F600FC.7050805@atmel.com> (raw)
In-Reply-To: <1358028480-4979-6-git-send-email-jeroen@myspectrum.nl>

On 1/13/2013 6:07, Jeroen Hofstee wrote:
> console_col, console_row, lcd_line_length, lcd_console_address had
> to be declared in board / driver specific code, but were not actually
> used there. Get rid of the global variables.
>
> Cc: Alessandro Rubini <rubini@unipv.it>
> Cc: Anatolij Gustschin <agust@denx.de>
> Cc: Bo Shen <voice.shen@atmel.com>
> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> Cc: Nikita Kiryanov <nikita@compulab.co.il>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Stelian Pop <stelian@popies.net>
> Cc: Tom Warren <twarren@nvidia.com>
> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
> ---
>   board/mcc200/lcd.c           |    6 ------
>   common/lcd.c                 |    6 ++++++
>   drivers/video/atmel_hlcdfb.c |    6 ------
>   drivers/video/atmel_lcdfb.c  |    6 ------
>   drivers/video/exynos_fb.c    |    6 ------
>   drivers/video/mpc8xx_lcd.c   |    6 ------
>   drivers/video/pxa_lcd.c      |    6 ------
>   drivers/video/tegra.c        |    6 ------
>   include/lcd.h                |    5 -----
>   9 files changed, 6 insertions(+), 47 deletions(-)
>
> diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
> index 0f3f585..caf8d8b 100644
> --- a/board/mcc200/lcd.c
> +++ b/board/mcc200/lcd.c
> @@ -68,16 +68,10 @@ vidinfo_t panel_info = {
>   	LCD_WIDTH, LCD_HEIGHT, LCD_BPP
>   };
>
> -int lcd_line_length;
> -
>   /*
>    * Frame buffer memory information
>    */
>   void *lcd_base;			/* Start of framebuffer memory  */
> -void *lcd_console_address;	/* Start of console buffer      */
> -
> -short console_col = 0;
> -short console_row = 0;
>
>   /*
>    *  The device we use to communicate with PSoC
> diff --git a/common/lcd.c b/common/lcd.c
> index b67724e..d3fd68d 100644
> --- a/common/lcd.c
> +++ b/common/lcd.c
> @@ -99,9 +99,15 @@ static void lcd_setbgcolor(int color);
>
>   static int lcd_color_fg;
>   static int lcd_color_bg;
> +static int lcd_line_length;
>
>   char lcd_is_enabled = 0;
>
> +static short console_col;
> +static short console_row;
> +
> +static void *lcd_console_address;
> +
>   static char lcd_flush_dcache;	/* 1 to flush dcache after each lcd update */
>
>
> diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
> index e74eb65..32626cf 100644
> --- a/drivers/video/atmel_hlcdfb.c
> +++ b/drivers/video/atmel_hlcdfb.c
> @@ -29,13 +29,7 @@
>   #include <lcd.h>
>   #include <atmel_hlcdc.h>
>
> -int lcd_line_length;
> -
>   void *lcd_base;				/* Start of framebuffer memory	*/
> -void *lcd_console_address;		/* Start of console buffer	*/
> -
> -short console_col;
> -short console_row;
>
>   /* configurable parameters */
>   #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
> index d96f175..370d9ca 100644
> --- a/drivers/video/atmel_lcdfb.c
> +++ b/drivers/video/atmel_lcdfb.c
> @@ -29,13 +29,7 @@
>   #include <lcd.h>
>   #include <atmel_lcdc.h>
>
> -int lcd_line_length;
> -
>   void *lcd_base;				/* Start of framebuffer memory	*/
> -void *lcd_console_address;		/* Start of console buffer	*/
> -
> -short console_col;
> -short console_row;
>
>   /* configurable parameters */
>   #define ATMEL_LCDC_CVAL_DEFAULT		0xc8

For Atmel part, it is ok for me.

Acked-by: Bo Shen <voice.shen@atmel.com>

Best Regards,
Bo Shen

> diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
> index 3dd6100..3e5f868 100644
> --- a/drivers/video/exynos_fb.c
> +++ b/drivers/video/exynos_fb.c
> @@ -33,13 +33,7 @@
>
>   #include "exynos_fb.h"
>
> -int lcd_line_length;
> -
>   void *lcd_base;
> -void *lcd_console_address;
> -
> -short console_col;
> -short console_row;
>
>   static unsigned int panel_width, panel_height;
>
> diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c
> index 4fd44ac..26ad432 100644
> --- a/drivers/video/mpc8xx_lcd.c
> +++ b/drivers/video/mpc8xx_lcd.c
> @@ -256,16 +256,10 @@ vidinfo_t panel_info = {
>   /*----------------------------------------------------------------------*/
>
>
> -int lcd_line_length;
> -
>   /*
>    * Frame buffer memory information
>    */
>   void *lcd_base;			/* Start of framebuffer memory	*/
> -void *lcd_console_address;	/* Start of console buffer	*/
> -
> -short console_col;
> -short console_row;
>
>   /************************************************************************/
>
> diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c
> index 25747b1..57243ce 100644
> --- a/drivers/video/pxa_lcd.c
> +++ b/drivers/video/pxa_lcd.c
> @@ -332,13 +332,7 @@ void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue);
>   void lcd_ctrl_init	(void *lcdbase);
>   void lcd_enable	(void);
>
> -int lcd_line_length;
> -
>   void *lcd_base;			/* Start of framebuffer memory	*/
> -void *lcd_console_address;		/* Start of console buffer	*/
> -
> -short console_col;
> -short console_row;
>
>   static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
>   static void pxafb_setup_gpio (vidinfo_t *vid);
> diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
> index 26a96a5..0d1cfa9 100644
> --- a/drivers/video/tegra.c
> +++ b/drivers/video/tegra.c
> @@ -60,13 +60,7 @@ enum {
>   	LCD_MAX_LOG2_BPP	= 4,		/* 2^4 = 16 bpp */
>   };
>
> -int lcd_line_length;
> -
>   void *lcd_base;			/* Start of framebuffer memory	*/
> -void *lcd_console_address;	/* Start of console buffer	*/
> -
> -short console_col;
> -short console_row;
>
>   vidinfo_t panel_info = {
>   	/* Insert a value here so that we don't end up in the BSS */
> diff --git a/include/lcd.h b/include/lcd.h
> index 7d8c41f..b8eea9c 100644
> --- a/include/lcd.h
> +++ b/include/lcd.h
> @@ -31,16 +31,11 @@
>
>   extern char lcd_is_enabled;
>
> -extern int lcd_line_length;
> -
>   /*
>    * Frame buffer memory information
>    */
>   extern void *lcd_base;			/* Start of framebuffer memory	*/
> -extern void *lcd_console_address;	/* Start of console buffer	*/
>
> -extern short console_col;
> -extern short console_row;
>   extern struct vidinfo panel_info;
>
>   extern void lcd_ctrl_init (void *lcdbase);
>

  reply	other threads:[~2013-01-16  1:23 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-12 22:07 [U-Boot] [PATCH 00/10] common.lcd: remove globals and cleanup Jeroen Hofstee
2013-01-12 22:07 ` [U-Boot] [PATCH 01/10] lcd, amba: remove this frame buffer driver since it is not used Jeroen Hofstee
2013-01-13 16:15   ` Alessandro Rubini
2013-01-12 22:07 ` [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions Jeroen Hofstee
2013-01-12 22:17   ` Jeroen Hofstee
2013-01-25 20:38   ` Simon Glass
2013-01-25 21:18     ` Tom Warren
2013-01-26 16:20       ` Jeroen Hofstee
2013-01-28 16:19         ` Tom Warren
2013-01-12 22:07 ` [U-Boot] [PATCH 03/10] lcd, mpc8xx: move the mpc8xx frame buffer driver to drivers/video Jeroen Hofstee
2013-01-12 22:07 ` [U-Boot] [PATCH 04/10] lcd, pxafb: move the pxafb " Jeroen Hofstee
2013-01-13  0:37   ` Marek Vasut
2013-01-12 22:07 ` [U-Boot] [PATCH 05/10] common/lcd.c: cleanup use of global variables Jeroen Hofstee
2013-01-16  1:23   ` Bo Shen [this message]
2013-01-12 22:07 ` [U-Boot] [PATCH 06/10] common/lcd.c: remove global lcd_base Jeroen Hofstee
2013-01-16  1:24   ` Bo Shen
2013-01-12 22:07 ` [U-Boot] [PATCH 07/10] common/lcd: cosmetic: clean up a bit Jeroen Hofstee
2013-03-29 11:04   ` Anatolij Gustschin
2013-01-12 22:07 ` [U-Boot] [PATCH 08/10] lcd, fb: cleanup, remove prototypes already in lcd.h and unused code Jeroen Hofstee
2013-01-12 22:07 ` [U-Boot] [PATCH 09/10] api/api_display: use the getters for console size info Jeroen Hofstee
2013-01-15 18:14   ` Che-liang Chiou
2013-01-12 22:07 ` [U-Boot] [PATCH 10/10] common/lcd.c: move the macro's to the c file Jeroen Hofstee
2013-03-29 11:05   ` Anatolij Gustschin
2013-01-22 20:44 ` [U-Boot] [PATCH v2 00/10] common.lcd: remove globals and cleanup Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 01/10] lcd, amba: remove this driver since it is not used Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 02/10] lcd, tegra: remove unused cursor functions Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 03/10] lcd, mpc8xx: move the mpc8xx driver to drivers/video Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 04/10] lcd, pxafb: move the pxafb " Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 05/10] common/lcd.c: cleanup use of global variables Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 06/10] common/lcd.c: remove global lcd_base Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 08/10] lcd, fb: remove duplicated prototypes and unused code Jeroen Hofstee
2013-01-22 20:44   ` [U-Boot] [PATCH v2 09/10] api/api_display: use the getters for console size info Jeroen Hofstee
2013-03-29 11:03   ` [U-Boot] [PATCH v2 00/10] common.lcd: remove globals and cleanup Anatolij Gustschin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50F600FC.7050805@atmel.com \
    --to=voice.shen@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox