* [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
2013-01-16 21:14 [U-Boot] [PATCH 0/7] Add support for NVIDIA Tegra114 SoC Tom Warren
@ 2013-01-16 21:14 ` Tom Warren
2013-01-16 22:32 ` Stephen Warren
2013-01-16 22:39 ` Allen Martin
2013-01-16 21:14 ` [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files Tom Warren
` (5 subsequent siblings)
6 siblings, 2 replies; 32+ messages in thread
From: Tom Warren @ 2013-01-16 21:14 UTC (permalink / raw)
To: u-boot
Common Tegra files are in arch-tegra, shared between T20/T30/T114.
Tegra114-specific headers are in arch-tegra114. Note that some of
these will be filled in as more T114 support is added (drivers,
WB/LP0 support, etc.).
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
arch/arm/include/asm/arch-tegra/clk_rst.h | 61 ++-
arch/arm/include/asm/arch-tegra/gp_padctrl.h | 1 +
arch/arm/include/asm/arch-tegra/pmc.h | 12 +
arch/arm/include/asm/arch-tegra/tegra.h | 3 +-
arch/arm/include/asm/arch-tegra114/clock-tables.h | 402 +++++++++++++
arch/arm/include/asm/arch-tegra114/clock.h | 24 +
arch/arm/include/asm/arch-tegra114/flow.h | 35 ++
arch/arm/include/asm/arch-tegra114/funcmux.h | 31 +
arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 59 ++
arch/arm/include/asm/arch-tegra114/gpio.h | 304 ++++++++++
arch/arm/include/asm/arch-tegra114/hardware.h | 22 +
arch/arm/include/asm/arch-tegra114/pinmux.h | 618 +++++++++++++++++++++
arch/arm/include/asm/arch-tegra114/pmu.h | 23 +
arch/arm/include/asm/arch-tegra114/spl.h | 22 +
arch/arm/include/asm/arch-tegra114/tegra.h | 26 +
15 files changed, 1637 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/include/asm/arch-tegra114/clock-tables.h
create mode 100644 arch/arm/include/asm/arch-tegra114/clock.h
create mode 100644 arch/arm/include/asm/arch-tegra114/flow.h
create mode 100644 arch/arm/include/asm/arch-tegra114/funcmux.h
create mode 100644 arch/arm/include/asm/arch-tegra114/gp_padctrl.h
create mode 100644 arch/arm/include/asm/arch-tegra114/gpio.h
create mode 100644 arch/arm/include/asm/arch-tegra114/hardware.h
create mode 100644 arch/arm/include/asm/arch-tegra114/pinmux.h
create mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h
create mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
create mode 100644 arch/arm/include/asm/arch-tegra114/tegra.h
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index 6a6e507..f3aa3ed 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -121,16 +121,43 @@ struct clk_rst_ctlr {
uint crc_clk_cpug_cmplx; /* _CLK_CPUG_CMPLX_0, 0x378 */
uint crc_clk_cpulp_cmplx; /* _CLK_CPULP_CMPLX_0, 0x37C */
uint crc_cpu_softrst_ctrl; /* _CPU_SOFTRST_CTRL_0, 0x380 */
- uint crc_reserved33[11]; /* _reserved_33, 0x384-3ac */
+ uint crc_cpu_softrst_ctrl1; /* _CPU_SOFTRST_CTR1L_0, 0x384 */
+ uint crc_cpu_softrst_ctrl2; /* _CPU_SOFTRST_CTRL2_0, 0x388 */
+ uint crc_reserved33[9]; /* _reserved_33, 0x38c-3ac */
uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW]; /* _G3D2_0..., 0x3b0-0x42c */
/* _RST_DEV_V/W_SET_0 0x430 ~ 0x43c */
struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW];
/* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */
struct clk_set_clr crc_clk_enb_ex_vw[TEGRA_CLK_REGS_VW];
- uint crc_reserved40[12]; /* _reserved_40, 0x450-47C */
- uint crc_pll_cfg0; /* _PLL_CFG0_0, 0x480 */
- uint crc_pll_cfg1; /* _PLL_CFG1_0, 0x484 */
- uint crc_pll_cfg2; /* _PLL_CFG2_0, 0x488 */
+ /* Additional (T114) registers */
+ uint crc_rst_cpug_cmplx_set; /* _RST_CPUG_CMPLX_SET_0, 0x450 */
+ uint crc_rst_cpug_cmplx_clr; /* _RST_CPUG_CMPLX_CLR_0, 0x454 */
+ uint crc_rst_cpulp_cmplx_set; /* _RST_CPULP_CMPLX_SET_0, 0x458 */
+ uint crc_rst_cpulp_cmplx_clr; /* _RST_CPULP_CMPLX_CLR_0, 0x45C */
+ uint crc_clk_cpug_cmplx_set; /* _CLK_CPUG_CMPLX_SET_0, 0x460 */
+ uint crc_clk_cpug_cmplx_clr; /* _CLK_CPUG_CMPLX_CLR_0, 0x464 */
+ uint crc_clk_cpulp_cmplx_set; /* _CLK_CPULP_CMPLX_SET_0, 0x468 */
+ uint crc_clk_cpulp_cmplx_clr; /* _CLK_CPULP_CMPLX_CLR_0, 0x46C */
+ uint crc_cpu_cmplx_status; /* _CPU_CMPLX_STATUS_0, 0x470 */
+ uint crc_reserved40[1]; /* _reserved_40, 0x474 */
+ uint crc_intstatus; /* __INTSTATUS_0, 0x478 */
+ uint crc_intmask; /* __INTMASK_0, 0x47C */
+ uint crc_utmip_pll_cfg0; /* _UTMIP_PLL_CFG0_0, 0x480 */
+ uint crc_utmip_pll_cfg1; /* _UTMIP_PLL_CFG1_0, 0x484 */
+ uint crc_utmip_pll_cfg2; /* _UTMIP_PLL_CFG2_0, 0x488 */
+
+ uint crc_plle_aux; /* _PLLE_AUX_0, 0x48C */
+ uint crc_sata_pll_cfg0; /* _SATA_PLL_CFG0_0, 0x490 */
+ uint crc_sata_pll_cfg1; /* _SATA_PLL_CFG1_0, 0x494 */
+ uint crc_pcie_pll_cfg0; /* _PCIE_PLL_CFG0_0, 0x498 */
+
+ uint crc_prog_audio_dly_clk; /* _PROG_AUDIO_DLY_CLK_0, 0x49C */
+ uint crc_audio_sync_clk_i2s0; /* _AUDIO_SYNC_CLK_I2S0_0, 0x4A0 */
+ uint crc_audio_sync_clk_i2s1; /* _AUDIO_SYNC_CLK_I2S1_0, 0x4A4 */
+ uint crc_audio_sync_clk_i2s2; /* _AUDIO_SYNC_CLK_I2S2_0, 0x4A8 */
+ uint crc_audio_sync_clk_i2s3; /* _AUDIO_SYNC_CLK_I2S3_0, 0x4AC */
+ uint crc_audio_sync_clk_i2s4; /* _AUDIO_SYNC_CLK_I2S4_0, 0x4B0 */
+ uint crc_audio_sync_clk_spdif; /* _AUDIO_SYNC_CLK_SPDIF_0, 0x4B4 */
};
/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
@@ -199,8 +226,13 @@ enum {
};
/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#if defined(CONFIG_TEGRA20)
#define OSC_FREQ_SHIFT 30
#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT)
+#else /* Tegra30, Tegra114 */
+#define OSC_FREQ_SHIFT 28
+#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT)
+#endif
#define OSC_XOBP_SHIFT 1
#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)
@@ -281,4 +313,23 @@ enum {
#define CLK_SYS_RATE_APB_RATE_SHIFT 0
#define CLK_SYS_RATE_APB_RATE_MASK (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
+/* CLK_RST_CONTROLLER_RST_CPUxx_CMPLX_CLR */
+#define CLR_CPURESET0 (1 << 0)
+#define CLR_CPURESET1 (1 << 1)
+#define CLR_CPURESET2 (1 << 2)
+#define CLR_CPURESET3 (1 << 3)
+#define CLR_DBGRESET0 (1 << 12)
+#define CLR_DBGRESET1 (1 << 13)
+#define CLR_DBGRESET2 (1 << 14)
+#define CLR_DBGRESET3 (1 << 15)
+#define CLR_CORERESET0 (1 << 16)
+#define CLR_CORERESET1 (1 << 17)
+#define CLR_CORERESET2 (1 << 18)
+#define CLR_CORERESET3 (1 << 19)
+#define CLR_CXRESET0 (1 << 20)
+#define CLR_CXRESET1 (1 << 21)
+#define CLR_CXRESET2 (1 << 22)
+#define CLR_CXRESET3 (1 << 23)
+#define CLR_NONCPURESET (1 << 29)
+
#endif /* _TEGRA_CLK_RST_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
index e6085a0..209abf1 100644
--- a/arch/arm/include/asm/arch-tegra/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
@@ -35,5 +35,6 @@
/* CHIPID field returned from APB_MISC_GP_HIDREV register */
#define CHIPID_TEGRA20 0x20
#define CHIPID_TEGRA30 0x30
+#define CHIPID_TEGRA114 0x35
#endif /* _TEGRA_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/pmc.h b/arch/arm/include/asm/arch-tegra/pmc.h
index b1d47cd..252c0de 100644
--- a/arch/arm/include/asm/arch-tegra/pmc.h
+++ b/arch/arm/include/asm/arch-tegra/pmc.h
@@ -127,6 +127,18 @@ struct pmc_ctlr {
#define PARTID_CP 0xFFFFFFF8
#define START_CP (1 << 8)
+#define CPUPWRREQ_POL (1 << 15)
#define CPUPWRREQ_OE (1 << 16)
+#define CRAILID (0)
+#define CELPID (12)
+#define CE0ID (14)
+#define C0NCID (15)
+#define C1NCID (16)
+#define CRAIL (1 << CRAILID)
+#define CELP (1 << CELPID)
+#define CE0 (1 << CE0ID)
+#define C0NC (1 << C0NCID)
+#define C1NC (1 << C1NCID)
+
#endif /* PMC_H */
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index 953936c..670745f 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -73,6 +73,7 @@ enum {
SKU_ID_AP25E = 0x1b,
SKU_ID_T25E = 0x1c,
SKU_ID_T30 = 0x81, /* Cardhu value */
+ SKU_ID_T114 = 0x00, /* Dalmore value */
};
/*
@@ -85,7 +86,7 @@ enum {
TEGRA_SOC_T20,
TEGRA_SOC_T25,
TEGRA_SOC_T30,
- TEGRA_SOC2_SLOW, /* T2x needs to run@slow clock initially */
+ TEGRA_SOC_T114,
TEGRA_SOC_CNT,
TEGRA_SOC_UNKNOWN = -1,
diff --git a/arch/arm/include/asm/arch-tegra114/clock-tables.h b/arch/arm/include/asm/arch-tegra114/clock-tables.h
new file mode 100644
index 0000000..c79f41e
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/clock-tables.h
@@ -0,0 +1,402 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 clock PLL tables */
+
+#ifndef _TEGRA114_CLOCK_TABLES_H_
+#define _TEGRA114_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+ CLOCK_ID_FIRST,
+ CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+ CLOCK_ID_MEMORY,
+ CLOCK_ID_PERIPH,
+ CLOCK_ID_AUDIO,
+ CLOCK_ID_USB,
+ CLOCK_ID_DISPLAY,
+
+ /* now the simple ones */
+ CLOCK_ID_FIRST_SIMPLE,
+ CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+ CLOCK_ID_EPCI,
+ CLOCK_ID_SFROM32KHZ,
+
+ /* These are the base clocks (inputs to the Tegra SOC) */
+ CLOCK_ID_32KHZ,
+ CLOCK_ID_OSC,
+
+ CLOCK_ID_COUNT, /* number of PLLs */
+ CLOCK_ID_DISPLAY2, /* placeholder */
+ CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+ PERIPH_ID_FIRST,
+
+ /* Low word: 31:0 (DEVICES_L) */
+ PERIPH_ID_CPU = PERIPH_ID_FIRST,
+ PERIPH_ID_COP,
+ PERIPH_ID_TRIGSYS,
+ PERIPH_ID_RESERVED3,
+ PERIPH_ID_RTC,
+ PERIPH_ID_TMR,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+
+ /* 8 */
+ PERIPH_ID_GPIO,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SPDIF,
+ PERIPH_ID_I2S1,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_NDFLASH,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC4,
+
+ /* 16 */
+ PERIPH_ID_RESERVED16,
+ PERIPH_ID_PWM,
+ PERIPH_ID_I2S2,
+ PERIPH_ID_EPP,
+ PERIPH_ID_VI,
+ PERIPH_ID_2D,
+ PERIPH_ID_USBD,
+ PERIPH_ID_ISP,
+
+ /* 24 */
+ PERIPH_ID_3D,
+ PERIPH_ID_RESERVED24,
+ PERIPH_ID_DISP2,
+ PERIPH_ID_DISP1,
+ PERIPH_ID_HOST1X,
+ PERIPH_ID_VCP,
+ PERIPH_ID_I2S0,
+ PERIPH_ID_CACHE2,
+
+ /* Middle word: 63:32 (DEVICES_H) */
+ PERIPH_ID_MEM,
+ PERIPH_ID_AHBDMA,
+ PERIPH_ID_APBDMA,
+ PERIPH_ID_RESERVED35,
+ PERIPH_ID_KBC,
+ PERIPH_ID_STAT_MON,
+ PERIPH_ID_PMC,
+ PERIPH_ID_FUSE,
+
+ /* 40 */
+ PERIPH_ID_KFUSE,
+ PERIPH_ID_SBC1,
+ PERIPH_ID_SNOR,
+ PERIPH_ID_RESERVED43,
+ PERIPH_ID_SBC2,
+ PERIPH_ID_RESERVED45,
+ PERIPH_ID_SBC3,
+ PERIPH_ID_I2C5,
+
+ /* 48 */
+ PERIPH_ID_DSI,
+ PERIPH_ID_TVO,
+ PERIPH_ID_MIPI,
+ PERIPH_ID_HDMI,
+ PERIPH_ID_CSI,
+ PERIPH_ID_TVDAC,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_UART3,
+
+ /* 56 */
+ PERIPH_ID_RESERVED56,
+ PERIPH_ID_EMC,
+ PERIPH_ID_USB2,
+ PERIPH_ID_USB3,
+ PERIPH_ID_MPE,
+ PERIPH_ID_VDE,
+ PERIPH_ID_BSEA,
+ PERIPH_ID_BSEV,
+
+ /* Upper word 95:64 (DEVICES_U) */
+ PERIPH_ID_SPEEDO,
+ PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_SBC4,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_PCIE,
+ PERIPH_ID_OWR,
+
+ /* 72 */
+ PERIPH_ID_AFI,
+ PERIPH_ID_CORESIGHT,
+ PERIPH_ID_PCIEXCLK,
+ PERIPH_ID_AVPUCQ,
+ PERIPH_ID_RESERVED76,
+ PERIPH_ID_RESERVED77,
+ PERIPH_ID_RESERVED78,
+ PERIPH_ID_DTV,
+
+ /* 80 */
+ PERIPH_ID_NANDSPEED,
+ PERIPH_ID_I2CSLOW,
+ PERIPH_ID_DSIB,
+ PERIPH_ID_RESERVED83,
+ PERIPH_ID_IRAMA,
+ PERIPH_ID_IRAMB,
+ PERIPH_ID_IRAMC,
+ PERIPH_ID_IRAMD,
+
+ /* 88 */
+ PERIPH_ID_CRAM2,
+ PERIPH_ID_RESERVED89,
+ PERIPH_ID_MDOUBLER,
+ PERIPH_ID_RESERVED91,
+ PERIPH_ID_SUSOUT,
+ PERIPH_ID_RESERVED93,
+ PERIPH_ID_RESERVED94,
+ PERIPH_ID_RESERVED95,
+
+ PERIPH_ID_VW_FIRST,
+ /* V word: 31:0 */
+ PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+ PERIPH_ID_CPULP,
+ PERIPH_ID_3D2,
+ PERIPH_ID_MSELECT,
+ PERIPH_ID_TSENSOR,
+ PERIPH_ID_I2S3,
+ PERIPH_ID_I2S4,
+ PERIPH_ID_I2C4,
+
+ /* 104 */
+ PERIPH_ID_SBC5,
+ PERIPH_ID_SBC6,
+ PERIPH_ID_AUDIO,
+ PERIPH_ID_APBIF,
+ PERIPH_ID_DAM0,
+ PERIPH_ID_DAM1,
+ PERIPH_ID_DAM2,
+ PERIPH_ID_HDA2CODEC2X,
+
+ /* 112 */
+ PERIPH_ID_ATOMICS,
+ PERIPH_ID_EX_RESERVED17,
+ PERIPH_ID_EX_RESERVED18,
+ PERIPH_ID_EX_RESERVED19,
+ PERIPH_ID_EX_RESERVED20,
+ PERIPH_ID_EX_RESERVED21,
+ PERIPH_ID_EX_RESERVED22,
+ PERIPH_ID_ACTMON,
+
+ /* 120 */
+ PERIPH_ID_EX_RESERVED24,
+ PERIPH_ID_EX_RESERVED25,
+ PERIPH_ID_EX_RESERVED26,
+ PERIPH_ID_EX_RESERVED27,
+ PERIPH_ID_SATA,
+ PERIPH_ID_HDA,
+ PERIPH_ID_EX_RESERVED30,
+ PERIPH_ID_EX_RESERVED31,
+
+ /* W word: 31:0 */
+ PERIPH_ID_HDA2HDMICODEC,
+ PERIPH_ID_RESERVED1_SATACOLD,
+ PERIPH_ID_RESERVED2_PCIERX0,
+ PERIPH_ID_RESERVED3_PCIERX1,
+ PERIPH_ID_RESERVED4_PCIERX2,
+ PERIPH_ID_RESERVED5_PCIERX3,
+ PERIPH_ID_RESERVED6_PCIERX4,
+ PERIPH_ID_RESERVED7_PCIERX5,
+
+ /* 136 */
+ PERIPH_ID_CEC,
+ PERIPH_ID_PCIE2_IOBIST,
+ PERIPH_ID_EMC_IOBIST,
+ PERIPH_ID_HDMI_IOBIST,
+ PERIPH_ID_SATA_IOBIST,
+ PERIPH_ID_MIPI_IOBIST,
+ PERIPH_ID_EMC1_IOBIST,
+ PERIPH_ID_XUSB,
+
+ /* 144 */
+ PERIPH_ID_CILAB,
+ PERIPH_ID_CILCD,
+ PERIPH_ID_CILE,
+ PERIPH_ID_DSIA_LP,
+ PERIPH_ID_DSIB_LP,
+ PERIPH_ID_RESERVED21_ENTROPY,
+ PERIPH_ID_RESERVED22_W,
+ PERIPH_ID_RESERVED23_W,
+
+ /* 152 */
+ PERIPH_ID_RESERVED24_W,
+ PERIPH_ID_AMX0,
+ PERIPH_ID_ADX0,
+ PERIPH_ID_DVFS,
+ PERIPH_ID_XUSB_SS,
+ PERIPH_ID_EMC_DLL,
+ PERIPH_ID_MC1,
+ PERIPH_ID_EMC1,
+
+ PERIPH_ID_COUNT,
+ PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+ PLL_OUT1,
+ PLL_OUT2,
+ PLL_OUT3,
+ PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+ /* 0x00 */
+ PERIPHC_I2S1,
+ PERIPHC_I2S2,
+ PERIPHC_SPDIF_OUT,
+ PERIPHC_SPDIF_IN,
+ PERIPHC_PWM,
+ PERIPHC_05h,
+ PERIPHC_SBC2,
+ PERIPHC_SBC3,
+
+ /* 0x08 */
+ PERIPHC_08h,
+ PERIPHC_I2C1,
+ PERIPHC_I2C5,
+ PERIPHC_0bh,
+ PERIPHC_0ch,
+ PERIPHC_SBC1,
+ PERIPHC_DISP1,
+ PERIPHC_DISP2,
+
+ /* 0x10 */
+ PERIPHC_CVE,
+ PERIPHC_11h,
+ PERIPHC_VI,
+ PERIPHC_13h,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC2,
+ PERIPHC_G3D,
+ PERIPHC_G2D,
+
+ /* 0x18 */
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC4,
+ PERIPHC_VFIR,
+ PERIPHC_EPP,
+ PERIPHC_MPE,
+ PERIPHC_MIPI,
+ PERIPHC_UART1,
+ PERIPHC_UART2,
+
+ /* 0x20 */
+ PERIPHC_HOST1X,
+ PERIPHC_21h,
+ PERIPHC_TVO,
+ PERIPHC_HDMI,
+ PERIPHC_24h,
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_EMC,
+
+ /* 0x28 */
+ PERIPHC_UART3,
+ PERIPHC_29h,
+ PERIPHC_VI_SENSOR,
+ PERIPHC_2bh,
+ PERIPHC_2ch,
+ PERIPHC_SBC4,
+ PERIPHC_I2C3,
+ PERIPHC_SDMMC3,
+
+ /* 0x30 */
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_VDE,
+ PERIPHC_OWR,
+ PERIPHC_NOR,
+ PERIPHC_CSITE,
+ PERIPHC_I2S0,
+ PERIPHC_37h,
+
+ PERIPHC_VW_FIRST,
+ /* 0x38 */
+ PERIPHC_G3D2 = PERIPHC_VW_FIRST,
+ PERIPHC_MSELECT,
+ PERIPHC_TSENSOR,
+ PERIPHC_I2S3,
+ PERIPHC_I2S4,
+ PERIPHC_I2C4,
+ PERIPHC_SBC5,
+ PERIPHC_SBC6,
+
+ /* 0x40 */
+ PERIPHC_AUDIO,
+ PERIPHC_41h,
+ PERIPHC_DAM0,
+ PERIPHC_DAM1,
+ PERIPHC_DAM2,
+ PERIPHC_HDA2CODEC2X,
+ PERIPHC_ACTMON,
+ PERIPHC_EXTPERIPH1,
+
+ /* 0x48 */
+ PERIPHC_EXTPERIPH2,
+ PERIPHC_EXTPERIPH3,
+ PERIPHC_NANDSPEED,
+ PERIPHC_I2CSLOW,
+ PERIPHC_SYS,
+ PERIPHC_SPEEDO,
+ PERIPHC_4eh,
+ PERIPHC_4fh,
+
+ /* 0x50 */
+ PERIPHC_50h,
+ PERIPHC_51h,
+ PERIPHC_52h,
+ PERIPHC_53h,
+ PERIPHC_SATAOOB,
+ PERIPHC_SATA,
+ PERIPHC_HDA,
+
+ PERIPHC_COUNT,
+
+ PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+ (id < PERIPH_ID_VW_FIRST) ? \
+ ((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+ (id) < PERIPH_ID_COUNT)
+
+#endif /* _TEGRA114_CLOCK_TABLES_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/clock.h b/arch/arm/include/asm/arch-tegra114/clock.h
new file mode 100644
index 0000000..9e56f57
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/clock.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 clock control functions */
+
+#ifndef _TEGRA114_CLOCK_H_
+#define _TEGRA114_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+#endif /* _TEGRA114_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/flow.h b/arch/arm/include/asm/arch-tegra114/flow.h
new file mode 100644
index 0000000..f9fe931
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/flow.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_FLOW_H_
+#define _TEGRA114_FLOW_H_
+
+struct flow_ctlr {
+ u32 halt_cpu_events;
+ u32 halt_cop_events;
+ u32 cpu_csr;
+ u32 cop_csr;
+ u32 xrq_events;
+ u32 halt_cpu1_events;
+ u32 cpu1_csr;
+ u32 halt_cpu2_events;
+ u32 cpu2_csr;
+ u32 halt_cpu3_events;
+ u32 cpu3_csr;
+ u32 cluster_control;
+};
+
+#endif /* _TEGRA114_FLOW_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/funcmux.h b/arch/arm/include/asm/arch-tegra114/funcmux.h
new file mode 100644
index 0000000..9d3521e
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/funcmux.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#ifndef _TEGRA114_FUNCMUX_H_
+#define _TEGRA114_FUNCMUX_H_
+
+#include <asm/arch-tegra/funcmux.h>
+
+/* Configs supported by the func mux */
+enum {
+ FUNCMUX_DEFAULT = 0, /* default config */
+
+ /* UART configs */
+ FUNCMUX_UART4_GMI = 0,
+};
+#endif /* _TEGRA114_FUNCMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
new file mode 100644
index 0000000..ea8c936
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_GP_PADCTRL_H_
+#define _TEGRA114_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+ u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */
+ u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */
+ u32 reserved0[22]; /* 0x08 - 0x5C: */
+ u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */
+ u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+ u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+ u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+ u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+ u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+ u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+ u32 atcfg4; /* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+ u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+ u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+ u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+ u32 csuscfg; /* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */
+ u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+ u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+ u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+ u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+ u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+ u32 lcdcfg1; /* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */
+ u32 lcdcfg2; /* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */
+ u32 sdio2cfg; /* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */
+ u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+ u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+ u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+ u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+ u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+ u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+ u32 vicfg1; /* 0xC8: APB_MISC_GP_VICFG1PADCTRL */
+ u32 vivttgen; /* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */
+ u32 reserved1[7]; /* 0xD0-0xE8: */
+ u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+};
+
+#endif /* _TEGRA114_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gpio.h b/arch/arm/include/asm/arch-tegra114/gpio.h
new file mode 100644
index 0000000..17e57ef
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/gpio.h
@@ -0,0 +1,304 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_GPIO_H_
+#define _TEGRA114_GPIO_H_
+
+/*
+ * The Tegra114 GPIO controller has 246 GPIOS in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */
+#define TEGRA_GPIO_BANKS 8 /* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+ uint gpio_config[TEGRA_GPIO_PORTS];
+ uint gpio_dir_out[TEGRA_GPIO_PORTS];
+ uint gpio_out[TEGRA_GPIO_PORTS];
+ uint gpio_in[TEGRA_GPIO_PORTS];
+ uint gpio_int_status[TEGRA_GPIO_PORTS];
+ uint gpio_int_enable[TEGRA_GPIO_PORTS];
+ uint gpio_int_level[TEGRA_GPIO_PORTS];
+ uint gpio_int_clear[TEGRA_GPIO_PORTS];
+ uint gpio_masked_config[TEGRA_GPIO_PORTS];
+ uint gpio_masked_dir_out[TEGRA_GPIO_PORTS];
+ uint gpio_masked_out[TEGRA_GPIO_PORTS];
+ uint gpio_masked_in[TEGRA_GPIO_PORTS];
+ uint gpio_masked_int_status[TEGRA_GPIO_PORTS];
+ uint gpio_masked_int_enable[TEGRA_GPIO_PORTS];
+ uint gpio_masked_int_level[TEGRA_GPIO_PORTS];
+ uint gpio_masked_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+ struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+enum gpio_pin {
+ GPIO_PA0 = 0, /* pin 0 */
+ GPIO_PA1,
+ GPIO_PA2,
+ GPIO_PA3,
+ GPIO_PA4,
+ GPIO_PA5,
+ GPIO_PA6,
+ GPIO_PA7,
+ GPIO_PB0, /* pin 8 */
+ GPIO_PB1,
+ GPIO_PB2,
+ GPIO_PB3,
+ GPIO_PB4,
+ GPIO_PB5,
+ GPIO_PB6,
+ GPIO_PB7,
+ GPIO_PC0, /* pin 16 */
+ GPIO_PC1,
+ GPIO_PC2,
+ GPIO_PC3,
+ GPIO_PC4,
+ GPIO_PC5,
+ GPIO_PC6,
+ GPIO_PC7,
+ GPIO_PD0, /* pin 24 */
+ GPIO_PD1,
+ GPIO_PD2,
+ GPIO_PD3,
+ GPIO_PD4,
+ GPIO_PD5,
+ GPIO_PD6,
+ GPIO_PD7,
+ GPIO_PE0, /* pin 32 */
+ GPIO_PE1,
+ GPIO_PE2,
+ GPIO_PE3,
+ GPIO_PE4,
+ GPIO_PE5,
+ GPIO_PE6,
+ GPIO_PE7,
+ GPIO_PF0, /* pin 40 */
+ GPIO_PF1,
+ GPIO_PF2,
+ GPIO_PF3,
+ GPIO_PF4,
+ GPIO_PF5,
+ GPIO_PF6,
+ GPIO_PF7,
+ GPIO_PG0, /* pin 48 */
+ GPIO_PG1,
+ GPIO_PG2,
+ GPIO_PG3,
+ GPIO_PG4,
+ GPIO_PG5,
+ GPIO_PG6,
+ GPIO_PG7,
+ GPIO_PH0, /* pin 56 */
+ GPIO_PH1,
+ GPIO_PH2,
+ GPIO_PH3,
+ GPIO_PH4,
+ GPIO_PH5,
+ GPIO_PH6,
+ GPIO_PH7,
+ GPIO_PI0, /* pin 64 */
+ GPIO_PI1,
+ GPIO_PI2,
+ GPIO_PI3,
+ GPIO_PI4,
+ GPIO_PI5,
+ GPIO_PI6,
+ GPIO_PI7,
+ GPIO_PJ0, /* pin 72 */
+ GPIO_PJ1,
+ GPIO_PJ2,
+ GPIO_PJ3,
+ GPIO_PJ4,
+ GPIO_PJ5,
+ GPIO_PJ6,
+ GPIO_PJ7,
+ GPIO_PK0, /* pin 80 */
+ GPIO_PK1,
+ GPIO_PK2,
+ GPIO_PK3,
+ GPIO_PK4,
+ GPIO_PK5,
+ GPIO_PK6,
+ GPIO_PK7,
+ GPIO_PL0, /* pin 88 */
+ GPIO_PL1,
+ GPIO_PL2,
+ GPIO_PL3,
+ GPIO_PL4,
+ GPIO_PL5,
+ GPIO_PL6,
+ GPIO_PL7,
+ GPIO_PM0, /* pin 96 */
+ GPIO_PM1,
+ GPIO_PM2,
+ GPIO_PM3,
+ GPIO_PM4,
+ GPIO_PM5,
+ GPIO_PM6,
+ GPIO_PM7,
+ GPIO_PN0, /* pin 104 */
+ GPIO_PN1,
+ GPIO_PN2,
+ GPIO_PN3,
+ GPIO_PN4,
+ GPIO_PN5,
+ GPIO_PN6,
+ GPIO_PN7,
+ GPIO_PO0, /* pin 112 */
+ GPIO_PO1,
+ GPIO_PO2,
+ GPIO_PO3,
+ GPIO_PO4,
+ GPIO_PO5,
+ GPIO_PO6,
+ GPIO_PO7,
+ GPIO_PP0, /* pin 120 */
+ GPIO_PP1,
+ GPIO_PP2,
+ GPIO_PP3,
+ GPIO_PP4,
+ GPIO_PP5,
+ GPIO_PP6,
+ GPIO_PP7,
+ GPIO_PQ0, /* pin 128 */
+ GPIO_PQ1,
+ GPIO_PQ2,
+ GPIO_PQ3,
+ GPIO_PQ4,
+ GPIO_PQ5,
+ GPIO_PQ6,
+ GPIO_PQ7,
+ GPIO_PR0, /* pin 136 */
+ GPIO_PR1,
+ GPIO_PR2,
+ GPIO_PR3,
+ GPIO_PR4,
+ GPIO_PR5,
+ GPIO_PR6,
+ GPIO_PR7,
+ GPIO_PS0, /* pin 144 */
+ GPIO_PS1,
+ GPIO_PS2,
+ GPIO_PS3,
+ GPIO_PS4,
+ GPIO_PS5,
+ GPIO_PS6,
+ GPIO_PS7,
+ GPIO_PT0, /* pin 152 */
+ GPIO_PT1,
+ GPIO_PT2,
+ GPIO_PT3,
+ GPIO_PT4,
+ GPIO_PT5,
+ GPIO_PT6,
+ GPIO_PT7,
+ GPIO_PU0, /* pin 160 */
+ GPIO_PU1,
+ GPIO_PU2,
+ GPIO_PU3,
+ GPIO_PU4,
+ GPIO_PU5,
+ GPIO_PU6,
+ GPIO_PU7,
+ GPIO_PV0, /* pin 168 */
+ GPIO_PV1,
+ GPIO_PV2,
+ GPIO_PV3,
+ GPIO_PV4,
+ GPIO_PV5,
+ GPIO_PV6,
+ GPIO_PV7,
+ GPIO_PW0, /* pin 176 */
+ GPIO_PW1,
+ GPIO_PW2,
+ GPIO_PW3,
+ GPIO_PW4,
+ GPIO_PW5,
+ GPIO_PW6,
+ GPIO_PW7,
+ GPIO_PX0, /* pin 184 */
+ GPIO_PX1,
+ GPIO_PX2,
+ GPIO_PX3,
+ GPIO_PX4,
+ GPIO_PX5,
+ GPIO_PX6,
+ GPIO_PX7,
+ GPIO_PY0, /* pin 192 */
+ GPIO_PY1,
+ GPIO_PY2,
+ GPIO_PY3,
+ GPIO_PY4,
+ GPIO_PY5,
+ GPIO_PY6,
+ GPIO_PY7,
+ GPIO_PZ0, /* pin 200 */
+ GPIO_PZ1,
+ GPIO_PZ2,
+ GPIO_PZ3,
+ GPIO_PZ4,
+ GPIO_PZ5,
+ GPIO_PZ6,
+ GPIO_PZ7,
+ GPIO_PAA0, /* pin 208 */
+ GPIO_PAA1,
+ GPIO_PAA2,
+ GPIO_PAA3,
+ GPIO_PAA4,
+ GPIO_PAA5,
+ GPIO_PAA6,
+ GPIO_PAA7,
+ GPIO_PBB0, /* pin 216 */
+ GPIO_PBB1,
+ GPIO_PBB2,
+ GPIO_PBB3,
+ GPIO_PBB4,
+ GPIO_PBB5,
+ GPIO_PBB6,
+ GPIO_PBB7,
+ GPIO_PCC0, /* pin 224 */
+ GPIO_PCC1,
+ GPIO_PCC2,
+ GPIO_PCC3,
+ GPIO_PCC4,
+ GPIO_PCC5,
+ GPIO_PCC6,
+ GPIO_PCC7,
+ GPIO_PDD0, /* pin 232 */
+ GPIO_PDD1,
+ GPIO_PDD2,
+ GPIO_PDD3,
+ GPIO_PDD4,
+ GPIO_PDD5,
+ GPIO_PDD6,
+ GPIO_PDD7,
+ GPIO_PEE0, /* pin 240 */
+ GPIO_PEE1,
+ GPIO_PEE2,
+ GPIO_PEE3,
+ GPIO_PEE4,
+ GPIO_PEE5,
+ GPIO_PEE6,
+ GPIO_PEE7, /* pin 247 */
+};
+
+#endif /* _TEGRA114_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/hardware.h b/arch/arm/include/asm/arch-tegra114/hardware.h
new file mode 100644
index 0000000..073c851
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_HARDWARE_H_
+#define _TEGRA114_HARDWARE_H_
+
+/* include tegra specific hardware definitions */
+
+#endif /* _TEGRA114_HARDWARE_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
new file mode 100644
index 0000000..64c0565
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -0,0 +1,618 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_PINMUX_H_
+#define _TEGRA114_PINMUX_H_
+
+/*
+ * Pin groups which we adjust. There are three basic attributes of each pin
+ * group which use this enum:
+ *
+ * - function
+ * - pullup / pulldown
+ * - tristate or normal
+ */
+enum pmux_pingrp {
+ PINGRP_ULPI_DATA0 = 0, /* offset 0x3000 */
+ PINGRP_ULPI_DATA1,
+ PINGRP_ULPI_DATA2,
+ PINGRP_ULPI_DATA3,
+ PINGRP_ULPI_DATA4,
+ PINGRP_ULPI_DATA5,
+ PINGRP_ULPI_DATA6,
+ PINGRP_ULPI_DATA7,
+ PINGRP_ULPI_CLK,
+ PINGRP_ULPI_DIR,
+ PINGRP_ULPI_NXT,
+ PINGRP_ULPI_STP,
+ PINGRP_DAP3_FS,
+ PINGRP_DAP3_DIN,
+ PINGRP_DAP3_DOUT,
+ PINGRP_DAP3_SCLK,
+ PINGRP_GPIO_PV0,
+ PINGRP_GPIO_PV1,
+ PINGRP_SDMMC1_CLK,
+ PINGRP_SDMMC1_CMD,
+ PINGRP_SDMMC1_DAT3,
+ PINGRP_SDMMC1_DAT2,
+ PINGRP_SDMMC1_DAT1,
+ PINGRP_SDMMC1_DAT0,
+ PINGRP_GPIO_PV2,
+ PINGRP_GPIO_PV3,
+ PINGRP_CLK2_OUT,
+ PINGRP_CLK2_REQ,
+ PINGRP_LCD_PWR1,
+ PINGRP_LCD_PWR2,
+ PINGRP_LCD_SDIN,
+ PINGRP_LCD_SDOUT,
+ PINGRP_LCD_WR_N,
+ PINGRP_LCD_CS0_N,
+ PINGRP_LCD_DC0,
+ PINGRP_LCD_SCK,
+ PINGRP_LCD_PWR0,
+ PINGRP_LCD_PCLK,
+ PINGRP_LCD_DE,
+ PINGRP_LCD_HSYNC,
+ PINGRP_LCD_VSYNC,
+ PINGRP_LCD_D0,
+ PINGRP_LCD_D1,
+ PINGRP_LCD_D2,
+ PINGRP_LCD_D3,
+ PINGRP_LCD_D4,
+ PINGRP_LCD_D5,
+ PINGRP_LCD_D6,
+ PINGRP_LCD_D7,
+ PINGRP_LCD_D8,
+ PINGRP_LCD_D9,
+ PINGRP_LCD_D10,
+ PINGRP_LCD_D11,
+ PINGRP_LCD_D12,
+ PINGRP_LCD_D13,
+ PINGRP_LCD_D14,
+ PINGRP_LCD_D15,
+ PINGRP_LCD_D16,
+ PINGRP_LCD_D17,
+ PINGRP_LCD_D18,
+ PINGRP_LCD_D19,
+ PINGRP_LCD_D20,
+ PINGRP_LCD_D21,
+ PINGRP_LCD_D22,
+ PINGRP_LCD_D23,
+ PINGRP_LCD_CS1_N,
+ PINGRP_LCD_M1,
+ PINGRP_LCD_DC1,
+ PINGRP_HDMI_INT,
+ PINGRP_DDC_SCL,
+ PINGRP_DDC_SDA,
+ PINGRP_CRT_HSYNC,
+ PINGRP_CRT_VSYNC,
+ PINGRP_VI_D0,
+ PINGRP_VI_D1,
+ PINGRP_VI_D2,
+ PINGRP_VI_D3,
+ PINGRP_VI_D4,
+ PINGRP_VI_D5,
+ PINGRP_VI_D6,
+ PINGRP_VI_D7,
+ PINGRP_VI_D8,
+ PINGRP_VI_D9,
+ PINGRP_VI_D10,
+ PINGRP_VI_D11,
+ PINGRP_VI_PCLK,
+ PINGRP_VI_MCLK,
+ PINGRP_VI_VSYNC,
+ PINGRP_VI_HSYNC,
+ PINGRP_UART2_RXD,
+ PINGRP_UART2_TXD,
+ PINGRP_UART2_RTS_N,
+ PINGRP_UART2_CTS_N,
+ PINGRP_UART3_TXD,
+ PINGRP_UART3_RXD,
+ PINGRP_UART3_CTS_N,
+ PINGRP_UART3_RTS_N,
+ PINGRP_GPIO_PU0,
+ PINGRP_GPIO_PU1,
+ PINGRP_GPIO_PU2,
+ PINGRP_GPIO_PU3,
+ PINGRP_GPIO_PU4,
+ PINGRP_GPIO_PU5,
+ PINGRP_GPIO_PU6,
+ PINGRP_GEN1_I2C_SDA,
+ PINGRP_GEN1_I2C_SCL,
+ PINGRP_DAP4_FS,
+ PINGRP_DAP4_DIN,
+ PINGRP_DAP4_DOUT,
+ PINGRP_DAP4_SCLK,
+ PINGRP_CLK3_OUT,
+ PINGRP_CLK3_REQ,
+ PINGRP_GMI_WP_N,
+ PINGRP_GMI_IORDY,
+ PINGRP_GMI_WAIT,
+ PINGRP_GMI_ADV_N,
+ PINGRP_GMI_CLK,
+ PINGRP_GMI_CS0_N,
+ PINGRP_GMI_CS1_N,
+ PINGRP_GMI_CS2_N,
+ PINGRP_GMI_CS3_N,
+ PINGRP_GMI_CS4_N,
+ PINGRP_GMI_CS6_N,
+ PINGRP_GMI_CS7_N,
+ PINGRP_GMI_AD0,
+ PINGRP_GMI_AD1,
+ PINGRP_GMI_AD2,
+ PINGRP_GMI_AD3,
+ PINGRP_GMI_AD4,
+ PINGRP_GMI_AD5,
+ PINGRP_GMI_AD6,
+ PINGRP_GMI_AD7,
+ PINGRP_GMI_AD8,
+ PINGRP_GMI_AD9,
+ PINGRP_GMI_AD10,
+ PINGRP_GMI_AD11,
+ PINGRP_GMI_AD12,
+ PINGRP_GMI_AD13,
+ PINGRP_GMI_AD14,
+ PINGRP_GMI_AD15,
+ PINGRP_GMI_A16,
+ PINGRP_GMI_A17,
+ PINGRP_GMI_A18,
+ PINGRP_GMI_A19,
+ PINGRP_GMI_WR_N,
+ PINGRP_GMI_OE_N,
+ PINGRP_GMI_DQS,
+ PINGRP_GMI_RST_N,
+ PINGRP_GEN2_I2C_SCL,
+ PINGRP_GEN2_I2C_SDA,
+ PINGRP_SDMMC4_CLK,
+ PINGRP_SDMMC4_CMD,
+ PINGRP_SDMMC4_DAT0,
+ PINGRP_SDMMC4_DAT1,
+ PINGRP_SDMMC4_DAT2,
+ PINGRP_SDMMC4_DAT3,
+ PINGRP_SDMMC4_DAT4,
+ PINGRP_SDMMC4_DAT5,
+ PINGRP_SDMMC4_DAT6,
+ PINGRP_SDMMC4_DAT7,
+ PINGRP_SDMMC4_RST_N,
+ PINGRP_CAM_MCLK,
+ PINGRP_GPIO_PCC1,
+ PINGRP_GPIO_PBB0,
+ PINGRP_CAM_I2C_SCL,
+ PINGRP_CAM_I2C_SDA,
+ PINGRP_GPIO_PBB3,
+ PINGRP_GPIO_PBB4,
+ PINGRP_GPIO_PBB5,
+ PINGRP_GPIO_PBB6,
+ PINGRP_GPIO_PBB7,
+ PINGRP_GPIO_PCC2,
+ PINGRP_JTAG_RTCK,
+ PINGRP_PWR_I2C_SCL,
+ PINGRP_PWR_I2C_SDA,
+ PINGRP_KB_ROW0,
+ PINGRP_KB_ROW1,
+ PINGRP_KB_ROW2,
+ PINGRP_KB_ROW3,
+ PINGRP_KB_ROW4,
+ PINGRP_KB_ROW5,
+ PINGRP_KB_ROW6,
+ PINGRP_KB_ROW7,
+ PINGRP_KB_ROW8,
+ PINGRP_KB_ROW9,
+ PINGRP_KB_ROW10,
+ PINGRP_KB_ROW11,
+ PINGRP_KB_ROW12,
+ PINGRP_KB_ROW13,
+ PINGRP_KB_ROW14,
+ PINGRP_KB_ROW15,
+ PINGRP_KB_COL0,
+ PINGRP_KB_COL1,
+ PINGRP_KB_COL2,
+ PINGRP_KB_COL3,
+ PINGRP_KB_COL4,
+ PINGRP_KB_COL5,
+ PINGRP_KB_COL6,
+ PINGRP_KB_COL7,
+ PINGRP_CLK_32K_OUT,
+ PINGRP_SYS_CLK_REQ,
+ PINGRP_CORE_PWR_REQ,
+ PINGRP_CPU_PWR_REQ,
+ PINGRP_PWR_INT_N,
+ PINGRP_CLK_32K_IN,
+ PINGRP_OWR,
+ PINGRP_DAP1_FS,
+ PINGRP_DAP1_DIN,
+ PINGRP_DAP1_DOUT,
+ PINGRP_DAP1_SCLK,
+ PINGRP_CLK1_REQ,
+ PINGRP_CLK1_OUT,
+ PINGRP_SPDIF_IN,
+ PINGRP_SPDIF_OUT,
+ PINGRP_DAP2_FS,
+ PINGRP_DAP2_DIN,
+ PINGRP_DAP2_DOUT,
+ PINGRP_DAP2_SCLK,
+ PINGRP_SPI2_MOSI,
+ PINGRP_SPI2_MISO,
+ PINGRP_SPI2_CS0_N,
+ PINGRP_SPI2_SCK,
+ PINGRP_SPI1_MOSI,
+ PINGRP_SPI1_SCK,
+ PINGRP_SPI1_CS0_N,
+ PINGRP_SPI1_MISO,
+ PINGRP_SPI2_CS1_N,
+ PINGRP_SPI2_CS2_N,
+ PINGRP_SDMMC3_CLK,
+ PINGRP_SDMMC3_CMD,
+ PINGRP_SDMMC3_DAT0,
+ PINGRP_SDMMC3_DAT1,
+ PINGRP_SDMMC3_DAT2,
+ PINGRP_SDMMC3_DAT3,
+ PINGRP_SDMMC3_DAT4,
+ PINGRP_SDMMC3_DAT5,
+ PINGRP_SDMMC3_DAT6,
+ PINGRP_SDMMC3_DAT7,
+ PINGRP_PEX_L0_PRSNT_N,
+ PINGRP_PEX_L0_RST_N,
+ PINGRP_PEX_L0_CLKREQ_N,
+ PINGRP_PEX_WAKE_N,
+ PINGRP_PEX_L1_PRSNT_N,
+ PINGRP_PEX_L1_RST_N,
+ PINGRP_PEX_L1_CLKREQ_N,
+ PINGRP_PEX_L2_PRSNT_N,
+ PINGRP_PEX_L2_RST_N,
+ PINGRP_PEX_L2_CLKREQ_N,
+ PINGRP_HDMI_CEC, /* offset 0x33e0 */
+ PINGRP_SDMMC1_WP_N,
+ PINGRP_SDMMC3_CD_N,
+ PINGRP_SPI1_CS1_N,
+ PINGRP_SPI1_CS2_N,
+ PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */
+ PINGRP_USB_VBUS_EN1,
+ PINGRP_SDMMC3_CLK_LB_IN,
+ PINGRP_SDMMC3_CLK_LB_OUT,
+ PINGRP_NAND_GMI_CLK_LB,
+ PINGRP_RESET_OUT_N,
+ PINGRP_COUNT,
+};
+
+enum pdrive_pingrp {
+ PDRIVE_PINGROUP_AO1 = 0, /* offset 0x868 */
+ PDRIVE_PINGROUP_AO2,
+ PDRIVE_PINGROUP_AT1,
+ PDRIVE_PINGROUP_AT2,
+ PDRIVE_PINGROUP_AT3,
+ PDRIVE_PINGROUP_AT4,
+ PDRIVE_PINGROUP_AT5,
+ PDRIVE_PINGROUP_CDEV1,
+ PDRIVE_PINGROUP_CDEV2,
+ PDRIVE_PINGROUP_CSUS,
+ PDRIVE_PINGROUP_DAP1,
+ PDRIVE_PINGROUP_DAP2,
+ PDRIVE_PINGROUP_DAP3,
+ PDRIVE_PINGROUP_DAP4,
+ PDRIVE_PINGROUP_DBG,
+ PDRIVE_PINGROUP_LCD1,
+ PDRIVE_PINGROUP_LCD2,
+ PDRIVE_PINGROUP_SDIO2,
+ PDRIVE_PINGROUP_SDIO3,
+ PDRIVE_PINGROUP_SPI,
+ PDRIVE_PINGROUP_UAA,
+ PDRIVE_PINGROUP_UAB,
+ PDRIVE_PINGROUP_UART2,
+ PDRIVE_PINGROUP_UART3,
+ PDRIVE_PINGROUP_VI1 = 24, /* offset 0x8c8 */
+ PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8ec */
+ PDRIVE_PINGROUP_CRT = 36, /* offset 0x8f8 */
+ PDRIVE_PINGROUP_DDC,
+ PDRIVE_PINGROUP_GMA,
+ PDRIVE_PINGROUP_GMB,
+ PDRIVE_PINGROUP_GMC,
+ PDRIVE_PINGROUP_GMD,
+ PDRIVE_PINGROUP_GME,
+ PDRIVE_PINGROUP_GMF,
+ PDRIVE_PINGROUP_GMG,
+ PDRIVE_PINGROUP_GMH,
+ PDRIVE_PINGROUP_OWR,
+ PDRIVE_PINGROUP_UAD,
+ PDRIVE_PINGROUP_GPV,
+ PDRIVE_PINGROUP_DEV3 = 49, /* offset 0x92c */
+ PDRIVE_PINGROUP_CEC = 52, /* offset 0x938 */
+ PDRIVE_PINGROUP_AT6,
+ PDRIVE_PINGROUP_DAP5,
+ PDRIVE_PINGROUP_VBUS,
+ PDRIVE_PINGROUP_COUNT,
+};
+
+/*
+ * Functions which can be assigned to each of the pin groups. The values here
+ * bear no relation to the values programmed into pinmux registers and are
+ * purely a convenience. The translation is done through a table search.
+ */
+enum pmux_func {
+ PMUX_FUNC_AHB_CLK,
+ PMUX_FUNC_APB_CLK,
+ PMUX_FUNC_AUDIO_SYNC,
+ PMUX_FUNC_CRT,
+ PMUX_FUNC_DAP1,
+ PMUX_FUNC_DAP2,
+ PMUX_FUNC_DAP3,
+ PMUX_FUNC_DAP4,
+ PMUX_FUNC_DAP5,
+ PMUX_FUNC_DISPA,
+ PMUX_FUNC_DISPB,
+ PMUX_FUNC_EMC_TEST0_DLL,
+ PMUX_FUNC_EMC_TEST1_DLL,
+ PMUX_FUNC_GMI,
+ PMUX_FUNC_GMI_INT,
+ PMUX_FUNC_HDMI,
+ PMUX_FUNC_I2C1,
+ PMUX_FUNC_I2C2,
+ PMUX_FUNC_I2C3,
+ PMUX_FUNC_IDE,
+ PMUX_FUNC_KBC,
+ PMUX_FUNC_MIO,
+ PMUX_FUNC_MIPI_HS,
+ PMUX_FUNC_NAND,
+ PMUX_FUNC_OSC,
+ PMUX_FUNC_OWR,
+ PMUX_FUNC_PCIE,
+ PMUX_FUNC_PLLA_OUT,
+ PMUX_FUNC_PLLC_OUT1,
+ PMUX_FUNC_PLLM_OUT1,
+ PMUX_FUNC_PLLP_OUT2,
+ PMUX_FUNC_PLLP_OUT3,
+ PMUX_FUNC_PLLP_OUT4,
+ PMUX_FUNC_PWM,
+ PMUX_FUNC_PWR_INTR,
+ PMUX_FUNC_PWR_ON,
+ PMUX_FUNC_RTCK,
+ PMUX_FUNC_SDMMC1,
+ PMUX_FUNC_SDMMC2,
+ PMUX_FUNC_SDMMC3,
+ PMUX_FUNC_SDMMC4,
+ PMUX_FUNC_SFLASH,
+ PMUX_FUNC_SPDIF,
+ PMUX_FUNC_SPI1,
+ PMUX_FUNC_SPI2,
+ PMUX_FUNC_SPI2_ALT,
+ PMUX_FUNC_SPI3,
+ PMUX_FUNC_SPI4,
+ PMUX_FUNC_TRACE,
+ PMUX_FUNC_TWC,
+ PMUX_FUNC_UARTA,
+ PMUX_FUNC_UARTB,
+ PMUX_FUNC_UARTC,
+ PMUX_FUNC_UARTD,
+ PMUX_FUNC_UARTE,
+ PMUX_FUNC_ULPI,
+ PMUX_FUNC_VI,
+ PMUX_FUNC_VI_SENSOR_CLK,
+ PMUX_FUNC_XIO,
+ PMUX_FUNC_BLINK,
+ PMUX_FUNC_CEC,
+ PMUX_FUNC_CLK12,
+ PMUX_FUNC_DAP,
+ PMUX_FUNC_DAPSDMMC2,
+ PMUX_FUNC_DDR,
+ PMUX_FUNC_DEV3,
+ PMUX_FUNC_DTV,
+ PMUX_FUNC_VI_ALT1,
+ PMUX_FUNC_VI_ALT2,
+ PMUX_FUNC_VI_ALT3,
+ PMUX_FUNC_EMC_DLL,
+ PMUX_FUNC_EXTPERIPH1,
+ PMUX_FUNC_EXTPERIPH2,
+ PMUX_FUNC_EXTPERIPH3,
+ PMUX_FUNC_GMI_ALT,
+ PMUX_FUNC_HDA,
+ PMUX_FUNC_HSI,
+ PMUX_FUNC_I2C4,
+ PMUX_FUNC_I2C5,
+ PMUX_FUNC_I2CPWR,
+ PMUX_FUNC_I2S0,
+ PMUX_FUNC_I2S1,
+ PMUX_FUNC_I2S2,
+ PMUX_FUNC_I2S3,
+ PMUX_FUNC_I2S4,
+ PMUX_FUNC_NAND_ALT,
+ PMUX_FUNC_POPSDIO4,
+ PMUX_FUNC_POPSDMMC4,
+ PMUX_FUNC_PWM0,
+ PMUX_FUNC_PWM1,
+ PMUX_FUNC_PWM2,
+ PMUX_FUNC_PWM3,
+ PMUX_FUNC_SATA,
+ PMUX_FUNC_SPI5,
+ PMUX_FUNC_SPI6,
+ PMUX_FUNC_SYSCLK,
+ PMUX_FUNC_VGP1,
+ PMUX_FUNC_VGP2,
+ PMUX_FUNC_VGP3,
+ PMUX_FUNC_VGP4,
+ PMUX_FUNC_VGP5,
+ PMUX_FUNC_VGP6,
+
+ PMUX_FUNC_USB,
+ PMUX_FUNC_SOC,
+ PMUX_FUNC_CPU,
+ PMUX_FUNC_CLK,
+ PMUX_FUNC_PWRON,
+ PMUX_FUNC_PMI,
+ PMUX_FUNC_CLDVFS,
+ PMUX_FUNC_RESET_OUT_N,
+
+ PMUX_FUNC_SAFE,
+ PMUX_FUNC_MAX,
+
+ PMUX_FUNC_RSVD1 = 0x8000,
+ PMUX_FUNC_RSVD2 = 0x8001,
+ PMUX_FUNC_RSVD3 = 0x8002,
+ PMUX_FUNC_RSVD4 = 0x8003,
+};
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) ((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) \
+ || (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+
+/* return 1 if a pingrp is in range */
+#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+ PMUX_PULL_NORMAL = 0,
+ PMUX_PULL_DOWN,
+ PMUX_PULL_UP,
+};
+/* return 1 if a pin_pupd_is in range */
+#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
+ ((pupd) <= PMUX_PULL_UP))
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+ PMUX_TRI_NORMAL = 0,
+ PMUX_TRI_TRISTATE = 1,
+};
+/* return 1 if a pin_tristate_is in range */
+#define pmux_pin_tristate_isvalid(tristate) (((tristate) >= PMUX_TRI_NORMAL) \
+ && ((tristate) <= PMUX_TRI_TRISTATE))
+
+enum pmux_pin_io {
+ PMUX_PIN_OUTPUT = 0,
+ PMUX_PIN_INPUT = 1,
+};
+/* return 1 if a pin_io_is in range */
+#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
+ ((io) <= PMUX_PIN_INPUT))
+
+enum pmux_pin_lock {
+ PMUX_PIN_LOCK_DEFAULT = 0,
+ PMUX_PIN_LOCK_DISABLE,
+ PMUX_PIN_LOCK_ENABLE,
+};
+/* return 1 if a pin_lock is in range */
+#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
+ ((lock) <= PMUX_PIN_LOCK_ENABLE))
+
+enum pmux_pin_od {
+ PMUX_PIN_OD_DEFAULT = 0,
+ PMUX_PIN_OD_DISABLE,
+ PMUX_PIN_OD_ENABLE,
+};
+/* return 1 if a pin_od is in range */
+#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
+ ((od) <= PMUX_PIN_OD_ENABLE))
+
+enum pmux_pin_ioreset {
+ PMUX_PIN_IO_RESET_DEFAULT = 0,
+ PMUX_PIN_IO_RESET_DISABLE,
+ PMUX_PIN_IO_RESET_ENABLE,
+};
+/* return 1 if a pin_ioreset_is in range */
+#define pmux_pin_ioreset_isvalid(ioreset) \
+ (((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
+ ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+
+/* Available power domains used by pin groups */
+enum pmux_vddio {
+ PMUX_VDDIO_BB = 0,
+ PMUX_VDDIO_LCD,
+ PMUX_VDDIO_VI,
+ PMUX_VDDIO_UART,
+ PMUX_VDDIO_DDR,
+ PMUX_VDDIO_NAND,
+ PMUX_VDDIO_SYS,
+ PMUX_VDDIO_AUDIO,
+ PMUX_VDDIO_SD,
+ PMUX_VDDIO_CAM,
+ PMUX_VDDIO_GMI,
+ PMUX_VDDIO_PEXCTL,
+ PMUX_VDDIO_SDMMC1,
+ PMUX_VDDIO_SDMMC3,
+ PMUX_VDDIO_SDMMC4,
+
+ PMUX_VDDIO_NONE
+};
+
+/* T114 pin drive group and pin mux registers */
+#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2)
+#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
+ PDRIVE_PINGROUP_COUNT)
+struct pmux_tri_ctlr {
+ uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */
+ uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */
+ uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */
+ uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */
+ uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */
+ uint pmt_reserved4[4]; /* _TRI_STATE_REG_A/B/C/D in t20 */
+ uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */
+
+ uint pmt_reserved[528]; /* ABP_MISC_PP_ reserved offs 28-864 */
+
+ uint pmt_drive[PDRIVE_PINGROUP_COUNT]; /* pin drive grps offs 868 */
+ uint pmt_reserved5[PMUX_OFFSET];
+ uint pmt_ctl[PINGRP_COUNT]; /* mux/pupd/tri regs, offset 0x3000 */
+};
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pingroup_config {
+ enum pmux_pingrp pingroup; /* pin group PINGRP_... */
+ enum pmux_func func; /* function to assign FUNC_... */
+ enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/
+ enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */
+ enum pmux_pin_io io; /* input or output PMUX_PIN_... */
+ enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */
+ enum pmux_pin_od od; /* open-drain or push-pull driver */
+ enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */
+};
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the complete configuration for a pin group */
+void pinmux_config_pingroup(struct pingroup_config *config);
+
+/* Set a pin group to tristate or normal */
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
+
+/* Set a pin group as input or output */
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
+
+/**
+ * Configure a list of pin groups
+ *
+ * @param config List of config items
+ * @param len Number of config items in list
+ */
+void pinmux_config_table(struct pingroup_config *config, int len);
+
+/* Set a group of pins from a table */
+void pinmux_init(void);
+
+#endif /* _TEGRA114_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pmu.h b/arch/arm/include/asm/arch-tegra114/pmu.h
new file mode 100644
index 0000000..5261629
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/pmu.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_PMU_H_
+#define _TEGRA114_PMU_H_
+
+/* Set core and CPU voltages to nominal levels */
+int pmu_set_nominal(void);
+
+#endif /* _TEGRA114_PMU_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/spl.h b/arch/arm/include/asm/arch-tegra114/spl.h
new file mode 100644
index 0000000..036f8f3
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/spl.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM 1
+
+#endif
diff --git a/arch/arm/include/asm/arch-tegra114/tegra.h b/arch/arm/include/asm/arch-tegra114/tegra.h
new file mode 100644
index 0000000..b852599
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/tegra.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_H_
+#define _TEGRA114_H_
+
+#define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T114 */
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET 6116 /* 12 bytes from end of BCT */
+
+#endif /* TEGRA114_H */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 32+ messages in thread* [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
2013-01-16 21:14 [U-Boot] [PATCH 0/7] Add support for NVIDIA Tegra114 SoC Tom Warren
` (2 preceding siblings ...)
2013-01-16 21:14 ` [U-Boot] [PATCH 3/7] Tegra114: Add CPU (armv7) files Tom Warren
@ 2013-01-16 21:14 ` Tom Warren
2013-01-16 22:46 ` Stephen Warren
2013-01-16 21:14 ` [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files Tom Warren
` (2 subsequent siblings)
6 siblings, 1 reply; 32+ messages in thread
From: Tom Warren @ 2013-01-16 21:14 UTC (permalink / raw)
To: u-boot
These files are used by both SPL and main U-Boot.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
arch/arm/cpu/tegra-common/ap.c | 8 +-
arch/arm/cpu/tegra-common/board.c | 23 +-
arch/arm/cpu/tegra114-common/Makefile | 41 ++
arch/arm/cpu/tegra114-common/clock.c | 1150 ++++++++++++++++++++++++++++++++
arch/arm/cpu/tegra114-common/funcmux.c | 63 ++
arch/arm/cpu/tegra114-common/pinmux.c | 506 ++++++++++++++
6 files changed, 1787 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/cpu/tegra114-common/Makefile
create mode 100644 arch/arm/cpu/tegra114-common/clock.c
create mode 100644 arch/arm/cpu/tegra114-common/funcmux.c
create mode 100644 arch/arm/cpu/tegra114-common/pinmux.c
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index aebe29e..e390cb8 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -42,7 +42,7 @@ int tegra_get_chip_type(void)
/*
* This is undocumented, Chip ID is bits 15:8 of the register
* APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
- * Tegra30
+ * Tegra30, and 0x35 for T114.
*/
gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
@@ -68,6 +68,12 @@ int tegra_get_chip_type(void)
return TEGRA_SOC_T30;
}
break;
+ case CHIPID_TEGRA114:
+ switch (tegra_sku_id) {
+ case SKU_ID_T114:
+ return TEGRA_SOC_T114;
+ }
+ break;
}
/* unknown sku id */
return TEGRA_SOC_UNKNOWN;
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index 1ec6c06..995156c 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -37,8 +37,10 @@ enum {
/* UARTs which we can enable */
UARTA = 1 << 0,
UARTB = 1 << 1,
+ UARTC = 1 << 2,
UARTD = 1 << 3,
- UART_COUNT = 4,
+ UARTE = 1 << 4,
+ UART_COUNT = 5,
};
/*
@@ -68,7 +70,7 @@ unsigned int query_sdram_size(void)
case 3:
return 0x40000000; /* 1GB */
}
-#else /* Tegra30 */
+#elif defined(CONFIG_TEGRA30)
/* bits 31:28 in OdmData are used for RAM size on T30 */
switch ((reg) >> 28) {
case 0:
@@ -84,6 +86,8 @@ unsigned int query_sdram_size(void)
case 8:
return 0x7ff00000; /* 2GB - 1MB */
}
+#else
+ return 0x7ff00000; /* 2GB - 1MB */
#endif
}
@@ -117,12 +121,18 @@ static int uart_configs[] = {
-1,
FUNCMUX_UART4_GMC,
-1,
-#else /* Tegra30 */
+#elif defined(CONFIG_TEGRA30)
FUNCMUX_UART1_ULPI, /* UARTA */
-1,
-1,
-1,
-1,
+#else /* Tegra114 */
+ -1,
+ -1,
+ -1,
+ FUNCMUX_UART4_GMI, /* UARTD */
+ -1,
#endif
};
@@ -138,6 +148,7 @@ static void setup_uarts(int uart_ids)
PERIPH_ID_UART2,
PERIPH_ID_UART3,
PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
};
size_t i;
@@ -161,9 +172,15 @@ void board_init_uart_f(void)
#ifdef CONFIG_TEGRA_ENABLE_UARTB
uart_ids |= UARTB;
#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTC
+ uart_ids |= UARTC;
+#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTD
uart_ids |= UARTD;
#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTE
+ uart_ids |= UARTE;
+#endif
setup_uarts(uart_ids);
}
diff --git a/arch/arm/cpu/tegra114-common/Makefile b/arch/arm/cpu/tegra114-common/Makefile
new file mode 100644
index 0000000..25197b8
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC)-common.o
+
+COBJS-y += clock.o funcmux.o pinmux.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c
new file mode 100644
index 0000000..be52da0
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/clock.c
@@ -0,0 +1,1150 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 Clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * This is our record of the current clock rate of each clock. We don't
+ * fill all of these in since we are only really interested in clocks which
+ * we use as parents.
+ */
+static unsigned pll_rate[CLOCK_ID_COUNT];
+
+/*
+ * The oscillator frequency is fixed to one of four set values. Based on this
+ * the other clocks are set up appropriately.
+ * Note: T114 HW supports other freqs (16.8, 38.4, 48) but we don't
+ */
+static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
+ 13000000,
+ 19200000,
+ 12000000,
+ 26000000,
+};
+
+/*
+ * Clock types that we can use as a source. The Tegra114 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+ CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
+ CLOCK_TYPE_MCPA, /* and so on */
+ CLOCK_TYPE_MCPT,
+ CLOCK_TYPE_PCM,
+ CLOCK_TYPE_PCMT,
+ CLOCK_TYPE_PCMT16,
+ CLOCK_TYPE_PDCT,
+ CLOCK_TYPE_ACPT,
+ CLOCK_TYPE_ASPTE,
+ CLOCK_TYPE_PMDACD2T,
+ CLOCK_TYPE_PCST,
+
+ CLOCK_TYPE_COUNT,
+ CLOCK_TYPE_NONE = -1, /* invalid clock type */
+};
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+ (id) < CLOCK_TYPE_COUNT)
+
+char pllp_valid = 1; /* PLLP is set up correctly */
+
+enum {
+ CLOCK_MAX_MUX = 8 /* number of source options for each clock */
+};
+
+enum {
+ MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */
+ MASK_BITS_31_29,
+ MASK_BITS_29_28,
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ * The extra column in each clock source array is used to store the mask
+ * bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+ { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
+ CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_29},
+ { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO),
+ CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
+ MASK_BITS_31_29},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_29_28}
+};
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+ (id) < PERIPHC_COUNT)
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+ /* 0x00 */
+ TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
+ TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT),
+
+ /* 0x08 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_I2C5, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T),
+
+ /* 0x10 */
+ TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
+
+ /* 0x18 */
+ TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */
+ TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
+
+ /* 0x20 */
+ TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
+
+ /* 0x28 */
+ TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
+
+ /* 0x30 */
+ TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+
+ /* 0x38h */ /* Jumps to reg offset 0x3B0h - new for T114 */
+ TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */
+ TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT),
+
+ /* 0x40 */
+ TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+ /* 0x48 */
+ TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+ TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+ TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+
+ /* 0x50 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */
+ TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ * uint vi_sensor; _VI_SENSOR_0, 0x1A8
+ * SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+ /* Low word: 31:0 */
+ NONE(CPU),
+ NONE(COP),
+ NONE(TRIGSYS),
+ NONE(RESERVED3),
+ NONE(RTC),
+ NONE(TMR),
+ PERIPHC_UART1,
+ PERIPHC_UART2, /* and vfir 0x68 */
+
+ /* 8 */
+ NONE(GPIO),
+ PERIPHC_SDMMC2,
+ NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
+ PERIPHC_I2S1,
+ PERIPHC_I2C1,
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC4,
+
+ /* 16 */
+ NONE(RESERVED16),
+ PERIPHC_PWM,
+ PERIPHC_I2S2,
+ PERIPHC_EPP,
+ PERIPHC_VI,
+ PERIPHC_G2D,
+ NONE(USBD),
+ NONE(ISP),
+
+ /* 24 */
+ PERIPHC_G3D,
+ NONE(RESERVED25),
+ PERIPHC_DISP2,
+ PERIPHC_DISP1,
+ PERIPHC_HOST1X,
+ NONE(VCP),
+ PERIPHC_I2S0,
+ NONE(CACHE2),
+
+ /* Middle word: 63:32 */
+ NONE(MEM),
+ NONE(AHBDMA),
+ NONE(APBDMA),
+ NONE(RESERVED35),
+ NONE(RESERVED36),
+ NONE(STAT_MON),
+ NONE(RESERVED38),
+ NONE(RESERVED39),
+
+ /* 40 */
+ NONE(KFUSE),
+ NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ PERIPHC_NOR,
+ NONE(RESERVED43),
+ PERIPHC_SBC2,
+ NONE(RESERVED45),
+ PERIPHC_SBC3,
+ PERIPHC_I2C5,
+
+ /* 48 */
+ NONE(DSI),
+ PERIPHC_TVO, /* also CVE 0x40 */
+ PERIPHC_MIPI,
+ PERIPHC_HDMI,
+ NONE(CSI),
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_UART3,
+
+ /* 56 */
+ NONE(RESERVED56),
+ PERIPHC_EMC,
+ NONE(USB2),
+ NONE(USB3),
+ PERIPHC_MPE,
+ PERIPHC_VDE,
+ NONE(BSEA),
+ NONE(BSEV),
+
+ /* Upper word 95:64 */
+ PERIPHC_SPEEDO,
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_I2C3,
+ PERIPHC_SBC4,
+ PERIPHC_SDMMC3,
+ NONE(PCIE),
+ PERIPHC_OWR,
+
+ /* 72 */
+ NONE(AFI),
+ PERIPHC_CSITE,
+ NONE(PCIEXCLK),
+ NONE(AVPUCQ),
+ NONE(RESERVED76),
+ NONE(RESERVED77),
+ NONE(RESERVED78),
+ NONE(DTV),
+
+ /* 80 */
+ PERIPHC_NANDSPEED,
+ PERIPHC_I2CSLOW,
+ NONE(DSIB),
+ NONE(RESERVED83),
+ NONE(IRAMA),
+ NONE(IRAMB),
+ NONE(IRAMC),
+ NONE(IRAMD),
+
+ /* 88 */
+ NONE(CRAM2),
+ NONE(RESERVED89),
+ NONE(MDOUBLER),
+ NONE(RESERVED91),
+ NONE(SUSOUT),
+ NONE(RESERVED93),
+ NONE(RESERVED94),
+ NONE(RESERVED95),
+
+ /* V word: 31:0 */
+ NONE(CPUG),
+ NONE(CPULP),
+ PERIPHC_G3D2,
+ PERIPHC_MSELECT,
+ PERIPHC_TSENSOR,
+ PERIPHC_I2S3,
+ PERIPHC_I2S4,
+ PERIPHC_I2C4,
+
+ /* 08 */
+ PERIPHC_SBC5,
+ PERIPHC_SBC6,
+ PERIPHC_AUDIO,
+ NONE(APBIF),
+ PERIPHC_DAM0,
+ PERIPHC_DAM1,
+ PERIPHC_DAM2,
+ PERIPHC_HDA2CODEC2X,
+
+ /* 16 */
+ NONE(ATOMICS),
+ NONE(RESERVED17),
+ NONE(RESERVED18),
+ NONE(RESERVED19),
+ NONE(RESERVED20),
+ NONE(RESERVED21),
+ NONE(RESERVED22),
+ PERIPHC_ACTMON,
+
+ /* 24 */
+ NONE(RESERVED24),
+ NONE(RESERVED25),
+ NONE(RESERVED26),
+ NONE(RESERVED27),
+ PERIPHC_SATA,
+ PERIPHC_HDA,
+ NONE(RESERVED30),
+ NONE(RESERVED31),
+
+ /* W word: 31:0 */
+ NONE(HDA2HDMICODEC),
+ NONE(RESERVED1_SATACOLD),
+ NONE(RESERVED2_PCIERX0),
+ NONE(RESERVED3_PCIERX1),
+ NONE(RESERVED4_PCIERX2),
+ NONE(RESERVED5_PCIERX3),
+ NONE(RESERVED6_PCIERX4),
+ NONE(RESERVED7_PCIERX5),
+
+ /* 40 */
+ NONE(CEC),
+ NONE(PCIE2_IOBIST),
+ NONE(EMC_IOBIST),
+ NONE(HDMI_IOBIST),
+ NONE(SATA_IOBIST),
+ NONE(MIPI_IOBIST),
+ NONE(EMC1_IOBIST),
+ NONE(XUSB),
+
+ /* 48 */
+ NONE(CILAB),
+ NONE(CILCD),
+ NONE(CILE),
+ NONE(DSIA_LP),
+ NONE(DSIB_LP),
+ NONE(RESERVED21_ENTROPY),
+ NONE(RESERVED22_W),
+ NONE(RESERVED23_W),
+
+ /* 56 */
+ NONE(RESERVED24_W),
+ NONE(AMX0),
+ NONE(ADX0),
+ NONE(DVFS),
+ NONE(XUSB_SS),
+ NONE(EMC_DLL),
+ NONE(MC1),
+ NONE(EMC1),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that T30/T114 support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+ if (reg & 1) /* one of the newer freqs */
+ printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+ return reg >> 2; /* Map to most common (T20) freqs */
+}
+
+int clock_get_osc_bypass(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
+}
+
+/* Returns a pointer to the registers of the given pll */
+static struct clk_pll *get_pll(enum clock_id clkid)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+ assert(clock_id_is_pll(clkid));
+ return &clkrst->crc_pll[clkid];
+}
+
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+ u32 *divp, u32 *cpcon, u32 *lfcon)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ u32 data;
+
+ assert(clkid != CLOCK_ID_USB);
+
+ /* Safety check, adds to code size but is small */
+ if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
+ return -1;
+ data = readl(&pll->pll_base);
+ *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+ *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
+ *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ data = readl(&pll->pll_misc);
+ *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
+ *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
+ return 0;
+}
+
+unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
+ u32 divp, u32 cpcon, u32 lfcon)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ u32 data;
+
+ /*
+ * We cheat by treating all PLL (except PLLU) in the same fashion.
+ * This works only because:
+ * - same fields are always mapped at same offsets, except DCCON
+ * - DCCON is always 0, doesn't conflict
+ * - M,N, P of PLLP values are ignored for PLLP
+ */
+ data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
+ writel(data, &pll->pll_misc);
+
+ data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
+ (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
+
+ if (clkid == CLOCK_ID_USB)
+ data |= divp << PLLU_VCO_FREQ_SHIFT;
+ else
+ data |= divp << PLL_DIVP_SHIFT;
+ writel(data, &pll->pll_base);
+
+ /* calculate the stable time */
+ return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+static u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ enum periphc_internal_id internal_id;
+
+ /* Coresight is a special case */
+ if (periph_id == PERIPH_ID_CSI)
+ return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+ assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(internal_id != -1);
+ if (internal_id >= PERIPHC_VW_FIRST) {
+ internal_id -= PERIPHC_VW_FIRST;
+ return &clkrst->crc_clk_src_vw[internal_id];
+ } else
+ return &clkrst->crc_clk_src[internal_id];
+}
+
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+ unsigned divisor)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+ u32 value;
+
+ value = readl(reg);
+
+ value &= ~OUT_CLK_SOURCE_MASK;
+ value |= source << OUT_CLK_SOURCE_SHIFT;
+
+ value &= ~OUT_CLK_DIVISOR_MASK;
+ value |= divisor << OUT_CLK_DIVISOR_SHIFT;
+
+ writel(value, reg);
+}
+
+void clock_ll_set_source(enum periph_id periph_id, unsigned source)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+ source << OUT_CLK_SOURCE_SHIFT);
+}
+
+/**
+ * Given the parent's rate and the required rate for the children, this works
+ * out the peripheral clock divider to use, in 7.1 binary format.
+ *
+ * @param divider_bits number of divider bits (8 or 16)
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param rate required clock rate for this clock
+ * @return divider which should be used
+ */
+static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
+ unsigned long rate)
+{
+ u64 divider = parent_rate * 2;
+ unsigned max_divider = 1 << divider_bits;
+
+ divider += rate - 1;
+ do_div(divider, rate);
+
+ if ((s64)divider - 2 < 0)
+ return 0;
+
+ if ((s64)divider - 2 >= max_divider)
+ return -1;
+
+ return divider - 2;
+}
+
+/**
+ * Given the parent's rate and the divider in 7.1 format, this works out the
+ * resulting peripheral clock rate.
+ *
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param divider which should be used in 7.1 format
+ * @return effective clock rate of peripheral
+ */
+static unsigned long get_rate_from_divider(unsigned long parent_rate,
+ int divider)
+{
+ u64 rate;
+
+ rate = (u64)parent_rate * 2;
+ do_div(rate, divider + 2);
+ return rate;
+}
+
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+ enum clock_id parent)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ return get_rate_from_divider(pll_rate[parent],
+ (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
+}
+
+/**
+ * Find the best available 7.1 format divisor given a parent clock rate and
+ * required child clock rate. This function assumes that a second-stage
+ * divisor is available which can divide by powers of 2 from 1 to 256.
+ *
+ * @param divider_bits number of divider bits (8 or 16)
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param rate required clock rate for this clock
+ * @param extra_div value for the second-stage divisor (not set if this
+ * function returns -1.
+ * @return divider which should be used, or -1 if nothing is valid
+ *
+ */
+static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
+ unsigned long rate, int *extra_div)
+{
+ int shift;
+ int best_divider = -1;
+ int best_error = rate;
+
+ /* try dividers from 1 to 256 and find closest match */
+ for (shift = 0; shift <= 8 && best_error > 0; shift++) {
+ unsigned divided_parent = parent_rate >> shift;
+ int divider = clk_get_divider(divider_bits, divided_parent,
+ rate);
+ unsigned effective_rate = get_rate_from_divider(divided_parent,
+ divider);
+ int error = rate - effective_rate;
+
+ /* Given a valid divider, look for the lowest error */
+ if (divider != -1 && error < best_error) {
+ best_error = error;
+ *extra_div = 1 << shift;
+ best_divider = divider;
+ }
+ }
+
+ /* return what we found - *extra_div will already be set */
+ return best_divider;
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+static int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+ enum clock_type_id type;
+ enum periphc_internal_id internal_id;
+ int mux;
+
+ assert(clock_periph_id_isvalid(periph_id));
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(periphc_internal_id_isvalid(internal_id));
+
+ type = clock_periph_type[internal_id];
+ assert(clock_type_id_isvalid(type));
+
+ *mux_bits = clock_source[type][CLOCK_MAX_MUX];
+
+ if (type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+ if (clock_source[type][mux] == parent)
+ return mux;
+
+ /* if we get here, either us or the caller has made a mistake */
+ printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+ parent);
+ return -1;
+}
+
+/**
+ * Adjust peripheral PLL to use the given divider and source.
+ *
+ * @param periph_id peripheral to adjust
+ * @param source Source number (0-3 or 0-7)
+ * @param mux_bits Number of mux bits (2 or 4)
+ * @param divider Required divider in 7.1 or 15.1 format
+ * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
+ * for this peripheral)
+ */
+static int adjust_periph_pll(enum periph_id periph_id, int source,
+ int mux_bits, unsigned divider)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
+ divider << OUT_CLK_DIVISOR_SHIFT);
+ udelay(1);
+
+ /* work out the source clock and set it */
+ if (source < 0)
+ return -1;
+ if (mux_bits == 4) {
+ clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
+ source << OUT_CLK_SOURCE4_SHIFT);
+ } else {
+ clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+ source << OUT_CLK_SOURCE_SHIFT);
+ }
+ udelay(2);
+ return 0;
+}
+
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate, int *extra_div)
+{
+ unsigned effective_rate;
+ int mux_bits, source;
+ int divider, divider_bits = 0;
+
+ /* work out the source clock and set it */
+ source = get_periph_clock_source(periph_id, parent, &mux_bits,
+ ÷r_bits);
+
+ if (extra_div)
+ divider = find_best_divider(divider_bits, pll_rate[parent],
+ rate, extra_div);
+ else
+ divider = clk_get_divider(divider_bits, pll_rate[parent],
+ rate);
+ assert(divider >= 0);
+ if (adjust_periph_pll(periph_id, source, mux_bits, divider))
+ return -1U;
+ debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
+ get_periph_source_reg(periph_id),
+ readl(get_periph_source_reg(periph_id)));
+
+ /* Check what we ended up with. This shouldn't matter though */
+ effective_rate = clock_get_periph_rate(periph_id, parent);
+ if (extra_div)
+ effective_rate /= *extra_div;
+ if (rate != effective_rate)
+ debug("Requested clock rate %u not honored (got %u)\n",
+ rate, effective_rate);
+ return effective_rate;
+}
+
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate)
+{
+ unsigned effective_rate;
+
+ reset_set_enable(periph_id, 1);
+ clock_enable(periph_id);
+
+ effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
+ NULL);
+
+ reset_set_enable(periph_id, 0);
+ return effective_rate;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *clk;
+ u32 reg;
+
+ /* Enable/disable the clock to this peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+ clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+ else
+ clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+ reg = readl(clk);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, clk);
+}
+
+void clock_enable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 1);
+}
+
+void clock_disable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 0);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *reset;
+ u32 reg;
+
+ /* Enable/disable reset to the peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ if (periph_id < PERIPH_ID_VW_FIRST)
+ reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+ else
+ reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+ reg = readl(reset);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, reset);
+}
+
+void reset_periph(enum periph_id periph_id, int us_delay)
+{
+ /* Put peripheral into reset */
+ reset_set_enable(periph_id, 1);
+ udelay(us_delay);
+
+ /* Remove reset */
+ reset_set_enable(periph_id, 0);
+
+ udelay(us_delay);
+}
+
+void reset_cmplx_set_enable(int cpu, int which, int reset)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 mask;
+
+ /* Form the mask, which depends on the cpu chosen. Tegra114 has 4 */
+ assert(cpu >= 0 && cpu < 4);
+ mask = which << cpu;
+
+ /* either enable or disable those reset for that CPU */
+ if (reset)
+ writel(mask, &clkrst->crc_cpu_cmplx_set);
+ else
+ writel(mask, &clkrst->crc_cpu_cmplx_clr);
+}
+
+unsigned clock_get_rate(enum clock_id clkid)
+{
+ struct clk_pll *pll;
+ u32 base;
+ u32 divm;
+ u64 parent_rate;
+ u64 rate;
+
+ parent_rate = osc_freq[clock_get_osc_freq()];
+ if (clkid == CLOCK_ID_OSC)
+ return parent_rate;
+
+ pll = get_pll(clkid);
+ base = readl(&pll->pll_base);
+
+ /* Oh for bf_unpack()... */
+ rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
+ divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+ if (clkid == CLOCK_ID_USB)
+ divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
+ else
+ divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ do_div(rate, divm);
+ return rate;
+}
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ * VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ * where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ * be overriden), 1 if PLL is already correct
+ */
+static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
+{
+ u32 base_reg;
+ u32 misc_reg;
+ struct clk_pll *pll;
+
+ pll = get_pll(clkid);
+
+ base_reg = readl(&pll->pll_base);
+
+ /* Set BYPASS, m, n and p to PLL_BASE */
+ base_reg &= ~PLL_DIVM_MASK;
+ base_reg |= m << PLL_DIVM_SHIFT;
+
+ base_reg &= ~PLL_DIVN_MASK;
+ base_reg |= n << PLL_DIVN_SHIFT;
+
+ base_reg &= ~PLL_DIVP_MASK;
+ base_reg |= p << PLL_DIVP_SHIFT;
+
+ if (clkid == CLOCK_ID_PERIPH) {
+ /*
+ * If the PLL is already set up, check that it is correct
+ * and record this info for clock_verify() to check.
+ */
+ if (base_reg & PLL_BASE_OVRRIDE_MASK) {
+ base_reg |= PLL_ENABLE_MASK;
+ if (base_reg != readl(&pll->pll_base))
+ pllp_valid = 0;
+ return pllp_valid ? 1 : -1;
+ }
+ base_reg |= PLL_BASE_OVRRIDE_MASK;
+ }
+
+ base_reg |= PLL_BYPASS_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ /* Set cpcon to PLL_MISC */
+ misc_reg = readl(&pll->pll_misc);
+ misc_reg &= ~PLL_CPCON_MASK;
+ misc_reg |= cpcon << PLL_CPCON_SHIFT;
+ writel(misc_reg, &pll->pll_misc);
+
+ /* Enable PLL */
+ base_reg |= PLL_ENABLE_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ /* Disable BYPASS */
+ base_reg &= ~PLL_BYPASS_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ return 0;
+}
+
+void clock_ll_start_uart(enum periph_id periph_id)
+{
+ /* Assert UART reset and enable clock */
+ reset_set_enable(periph_id, 1);
+ clock_enable(periph_id);
+ clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+ /* wait for 2us */
+ udelay(2);
+
+ /* De-assert reset to UART */
+ reset_set_enable(periph_id, 0);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id Clock ID according to tegra114 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+static enum periph_id clk_id_to_periph_id(int clk_id)
+{
+ if (clk_id > PERIPH_ID_COUNT)
+ return PERIPH_ID_NONE;
+
+ switch (clk_id) {
+ case PERIPH_ID_RESERVED3:
+ case PERIPH_ID_RESERVED16:
+ case PERIPH_ID_RESERVED24:
+ case PERIPH_ID_RESERVED35:
+ case PERIPH_ID_RESERVED43:
+ case PERIPH_ID_RESERVED45:
+ case PERIPH_ID_RESERVED56:
+ case PERIPH_ID_RESERVED76:
+ case PERIPH_ID_RESERVED77:
+ case PERIPH_ID_RESERVED78:
+ case PERIPH_ID_RESERVED83:
+ case PERIPH_ID_RESERVED89:
+ case PERIPH_ID_RESERVED91:
+ case PERIPH_ID_RESERVED93:
+ case PERIPH_ID_RESERVED94:
+ case PERIPH_ID_RESERVED95:
+ return PERIPH_ID_NONE;
+ default:
+ return clk_id;
+ }
+}
+
+int clock_decode_periph_id(const void *blob, int node)
+{
+ enum periph_id id;
+ u32 cell[2];
+ int err;
+
+ err = fdtdec_get_int_array(blob, node, "clocks", cell,
+ ARRAY_SIZE(cell));
+ if (err)
+ return -1;
+ id = clk_id_to_periph_id(cell[1]);
+ assert(clock_periph_id_isvalid(id));
+ return id;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+int clock_verify(void)
+{
+ struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
+ u32 reg = readl(&pll->pll_base);
+
+ if (!pllp_valid) {
+ printf("Warning: PLLP %x is not correct\n", reg);
+ return -1;
+ }
+ debug("PLLP %x is correct\n", reg);
+ return 0;
+}
+
+void clock_early_init(void)
+{
+ /*
+ * PLLP output frequency set to 408Mhz
+ * PLLC output frequency set to 600Mhz
+ * PLLD output frequency set to 925Mhz
+ */
+ switch (clock_get_osc_freq()) {
+ case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+ break;
+
+ case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+ break;
+
+ case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+ break;
+ case CLOCK_OSC_FREQ_19_2:
+ default:
+ /*
+ * These are not supported. It is too early to print a
+ * message and the UART likely won't work anyway due to the
+ * oscillator being wrong.
+ */
+ break;
+ }
+
+ /*
+ * Set PLLC_MISC2 and MISC
+ *
+ * TODO: replace direct setting with functions
+ */
+ writel(0x00561600, 0x60006088); /* PLLC_MISC2: dynramp_stepA/B */
+ writel(0x01000800, 0x6000608c); /* PLLC_MISC: LOCK_ENABLE */
+ udelay(2);
+
+ /*
+ * Set PLLD_MISC
+ */
+ writel(0x40000c10, 0x600060dc); /* PLLD: LOCK_ENABLE */
+ /* CPCON: 12, LFCON: 1 */
+ udelay(2);
+}
+
+void clock_init(void)
+{
+ pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
+ pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
+ pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
+ pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+ pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
+ pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
+ debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+ debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
+ debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
+ debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);
+}
diff --git a/arch/arm/cpu/tegra114-common/funcmux.c b/arch/arm/cpu/tegra114-common/funcmux.c
new file mode 100644
index 0000000..2b6163e
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/funcmux.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+ int bad_config = config != FUNCMUX_DEFAULT;
+
+ switch (id) {
+ case PERIPH_ID_UART4:
+ switch (config) {
+ case FUNCMUX_UART4_GMI:
+ pinmux_set_func(PINGRP_GMI_A16, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A17, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A18, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A19, PMUX_FUNC_UARTD);
+
+ pinmux_set_io(PINGRP_GMI_A16, PMUX_PIN_OUTPUT);
+ pinmux_set_io(PINGRP_GMI_A17, PMUX_PIN_INPUT);
+ pinmux_set_io(PINGRP_GMI_A18, PMUX_PIN_INPUT);
+ pinmux_set_io(PINGRP_GMI_A19, PMUX_PIN_OUTPUT);
+
+ pinmux_tristate_disable(PINGRP_GMI_A16);
+ pinmux_tristate_disable(PINGRP_GMI_A17);
+ pinmux_tristate_disable(PINGRP_GMI_A18);
+ pinmux_tristate_disable(PINGRP_GMI_A19);
+ break;
+ }
+ break;
+
+ /* Add other periph IDs here as needed */
+
+ default:
+ debug("%s: invalid periph_id %d", __func__, id);
+ return -1;
+ }
+
+ if (bad_config) {
+ debug("%s: invalid config %d for periph_id %d", __func__,
+ config, id);
+ return -1;
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
new file mode 100644
index 0000000..a8f16f9
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/pinmux.h>
+
+struct tegra_pingroup_desc {
+ const char *name;
+ enum pmux_func funcs[4];
+ enum pmux_func func_safe;
+ enum pmux_vddio vddio;
+ enum pmux_pin_io io;
+};
+
+#define PMUX_MUXCTL_SHIFT 0
+#define PMUX_PULL_SHIFT 2
+#define PMUX_TRISTATE_SHIFT 4
+#define PMUX_TRISTATE_MASK (1 << PMUX_TRISTATE_SHIFT)
+#define PMUX_IO_SHIFT 5
+#define PMUX_OD_SHIFT 6
+#define PMUX_LOCK_SHIFT 7
+#define PMUX_IO_RESET_SHIFT 8
+
+/* Convenient macro for defining pin group properties */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \
+ { \
+ .vddio = PMUX_VDDIO_ ## vdd, \
+ .funcs = { \
+ PMUX_FUNC_ ## f0, \
+ PMUX_FUNC_ ## f1, \
+ PMUX_FUNC_ ## f2, \
+ PMUX_FUNC_ ## f3, \
+ }, \
+ .func_safe = PMUX_FUNC_RSVD1, \
+ .io = PMUX_PIN_ ## iod, \
+ }
+
+/* Input and output pins */
+#define PINI(pg_name, vdd, f0, f1, f2, f3) \
+ PIN(pg_name, vdd, f0, f1, f2, f3, INPUT)
+#define PINO(pg_name, vdd, f0, f1, f2, f3) \
+ PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+ /* NAME VDD f0 f1 f2 f3 */
+ PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA1, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA2, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA3, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA4, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA5, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA6, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA7, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_CLK, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_DIR, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_NXT, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_STP, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(DAP3_FS, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_DIN, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_DOUT, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_SCLK, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(GPIO_PV0, BB, USB, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PV1, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC1_CLK, SDMMC1, SDMMC1, CLK12, RSVD3, RSVD4),
+ PINI(SDMMC1_CMD, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA),
+ PINI(SDMMC1_DAT3, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA),
+ PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA),
+ PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA),
+ PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA),
+ PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4),
+ PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4),
+ PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4),
+ PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4),
+ PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4),
+ PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4),
+ PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
+ PINI(UART2_CTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
+ PINI(UART3_TXD, UART, UARTC, RSVD2, RSVD3, SPI4),
+ PINI(UART3_RXD, UART, UARTC, RSVD2, RSVD3, SPI4),
+ PINI(UART3_CTS_N, UART, UARTC, SDMMC1, DTV, SPI4),
+ PINI(UART3_RTS_N, UART, UARTC, PWM0, DTV, DISPA),
+ PINI(GPIO_PU0, UART, OWR, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU1, UART, RSVD1, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU2, UART, RSVD1, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU3, UART, PWM0, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU4, UART, PWM1, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU5, UART, PWM2, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU6, UART, PWM3, UARTA, USB, DISPB),
+ PINI(GEN1_I2C_SDA, UART, I2C1, RSVD2, RSVD3, RSVD4),
+ PINI(GEN1_I2C_SCL, UART, I2C1, RSVD2, RSVD3, RSVD4),
+ PINI(DAP4_FS, UART, I2S3, RSVD2, DTV, RSVD4),
+ PINI(DAP4_DIN, UART, I2S3, RSVD2, RSVD3, RSVD4),
+ PINI(DAP4_DOUT, UART, I2S3, RSVD2, DTV, RSVD4),
+ PINI(DAP4_SCLK, UART, I2S3, RSVD2, RSVD3, RSVD4),
+ PINI(CLK3_OUT, UART, EXTPERIPH3, RSVD2, RSVD3, RSVD4),
+ PINI(CLK3_REQ, UART, DEV3, RSVD2, RSVD3, RSVD4),
+ PINI(GMI_WP_N, GMI, RSVD1, NAND, GMI, GMI_ALT),
+ PINI(GMI_IORDY, GMI, SDMMC2, RSVD2, GMI, TRACE),
+ PINI(GMI_WAIT, GMI, SPI4, NAND, GMI, DTV),
+ PINI(GMI_ADV_N, GMI, RSVD1, NAND, GMI, TRACE),
+ PINI(GMI_CLK, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_CS0_N, GMI, RSVD1, NAND, GMI, USB),
+ PINI(GMI_CS1_N, GMI, RSVD1, NAND, GMI, SOC),
+ PINI(GMI_CS2_N, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_CS3_N, GMI, SDMMC2, NAND, GMI, GMI_ALT),
+ PINI(GMI_CS4_N, GMI, USB, NAND, GMI, TRACE),
+ PINI(GMI_CS6_N, GMI, NAND, NAND_ALT, GMI, SPI4),
+ PINI(GMI_CS7_N, GMI, NAND, NAND_ALT, GMI, SDMMC2),
+ PINI(GMI_AD0, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD1, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD2, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD3, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD4, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD5, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD6, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD7, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD8, GMI, PWM0, NAND, GMI, DTV),
+ PINI(GMI_AD9, GMI, PWM1, NAND, GMI, CLDVFS),
+ PINI(GMI_AD10, GMI, PWM2, NAND, GMI, CLDVFS),
+ PINI(GMI_AD11, GMI, PWM3, NAND, GMI, USB),
+ PINI(GMI_AD12, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(GMI_AD13, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(GMI_AD14, GMI, SDMMC2, NAND, GMI, DTV),
+ PINI(GMI_AD15, GMI, SDMMC2, NAND, GMI, DTV),
+ PINI(GMI_A16, GMI, UARTD, TRACE, GMI, GMI_ALT),
+ PINI(GMI_A17, GMI, UARTD, RSVD2, GMI, TRACE),
+ PINI(GMI_A18, GMI, UARTD, RSVD2, GMI, TRACE),
+ PINI(GMI_A19, GMI, UARTD, SPI4, GMI, TRACE),
+ PINI(GMI_WR_N, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_OE_N, GMI, RSVD1, NAND, GMI, SOC),
+ PINI(GMI_DQS, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_RST_N, GMI, NAND, NAND_ALT, GMI, RSVD4),
+ PINI(GEN2_I2C_SCL, GMI, I2C2, RSVD2, GMI, RSVD4),
+ PINI(GEN2_I2C_SDA, GMI, I2C2, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_CLK, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_CMD, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_DAT0, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT1, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT2, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT3, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT4, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4),
+ PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4),
+ PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3),
+ PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4),
+ PINI(CAM_I2C_SDA, CAM, VGP2, I2C3, RSVD3, RSVD4),
+ PINI(GPIO_PBB3, CAM, VGP3, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB4, CAM, VGP4, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB5, CAM, VGP5, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB6, CAM, VGP6, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB7, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PCC2, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(JTAG_RTCK, SYS, RTCK, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_I2C_SCL, SYS, I2CPWR, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_I2C_SDA, SYS, I2CPWR, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW0, SYS, KBC, RSVD2, DTV, RSVD4),
+ PINI(KB_ROW1, SYS, KBC, RSVD2, DTV, RSVD4),
+ PINI(KB_ROW2, SYS, KBC, RSVD2, DTV, SOC),
+ PINI(KB_ROW3, SYS, KBC, DISPA, RSVD3, DISPB),
+ PINI(KB_ROW4, SYS, KBC, DISPA, SPI2, DISPB),
+ PINI(KB_ROW5, SYS, KBC, DISPA, SPI2, DISPB),
+ PINI(KB_ROW6, SYS, KBC, DISPA, RSVD3, DISPB),
+ PINI(KB_ROW7, SYS, KBC, RSVD2, CLDVFS, UARTA),
+ PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL),
+ PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL),
+ PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(KB_COL3, SYS, KBC, DISPA, PWM2, UARTA),
+ PINI(KB_COL4, SYS, KBC, OWR, SDMMC3, UARTA),
+ PINI(KB_COL5, SYS, KBC, RSVD2, SDMMC1, RSVD4),
+ PINI(KB_COL6, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(KB_COL7, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(CLK_32K_OUT, SYS, BLINK, SOC, RSVD3, RSVD4),
+ PINI(SYS_CLK_REQ, SYS, SYSCLK, RSVD2, RSVD3, RSVD4),
+ PINI(CORE_PWR_REQ, SYS, PWRON, RSVD2, RSVD3, RSVD4),
+ PINI(CPU_PWR_REQ, SYS, CPU, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_INT_N, SYS, PMI, RSVD2, RSVD3, RSVD4),
+ PINI(CLK_32K_IN, SYS, CLK, RSVD2, RSVD3, RSVD4),
+ PINI(OWR, SYS, OWR, RSVD2, RSVD3, RSVD4),
+ PINI(DAP1_FS, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_DIN, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_DOUT, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_SCLK, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(CLK1_REQ, AUDIO, DAP, DAP1, RSVD3, RSVD4),
+ PINI(CLK1_OUT, AUDIO, EXTPERIPH1, DAP2, RSVD3, RSVD4),
+ PINI(SPDIF_IN, AUDIO, SPDIF, USB, RSVD3, RSVD4),
+ PINI(SPDIF_OUT, AUDIO, SPDIF, RSVD2, RSVD3, RSVD4),
+ PINI(DAP2_FS, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4),
+ PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4),
+ PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2),
+ PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4),
+ PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
+ PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3),
+ PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
+ PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3),
+ PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3),
+ PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3),
+ PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC),
+ PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA),
+ PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4),
+ PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1),
+ PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1),
+ PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *tri = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin */
+ assert(pmux_pingrp_isvalid(pin));
+
+ reg = readl(tri);
+ if (enable)
+ reg |= PMUX_TRISTATE_MASK;
+ else
+ reg &= ~PMUX_TRISTATE_MASK;
+ writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pull = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and pupd */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_pupd_isvalid(pupd));
+
+ reg = readl(pull);
+ reg &= ~(0x3 << PMUX_PULL_SHIFT);
+ reg |= (pupd << PMUX_PULL_SHIFT);
+ writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *muxctl = &pmt->pmt_ctl[pin];
+ int i, mux = -1;
+ u32 reg;
+
+ /* Error check on pin and func */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_func_isvalid(func));
+
+ /* Handle special values */
+ if (func == PMUX_FUNC_SAFE)
+ func = tegra_soc_pingroups[pin].func_safe;
+
+ if (func & PMUX_FUNC_RSVD1) {
+ mux = func & 0x3;
+ } else {
+ /* Search for the appropriate function */
+ for (i = 0; i < 4; i++) {
+ if (tegra_soc_pingroups[pin].funcs[i] == func) {
+ mux = i;
+ break;
+ }
+ }
+ }
+ assert(mux != -1);
+
+ reg = readl(muxctl);
+ reg &= ~(0x3 << PMUX_MUXCTL_SHIFT);
+ reg |= (mux << PMUX_MUXCTL_SHIFT);
+ writel(reg, muxctl);
+
+}
+
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_io = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and io */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_io_isvalid(io));
+
+ reg = readl(pin_io);
+ reg &= ~(0x1 << PMUX_IO_SHIFT);
+ reg |= (io & 0x1) << PMUX_IO_SHIFT;
+ writel(reg, pin_io);
+}
+
+static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_lock = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and lock */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_lock_isvalid(lock));
+
+ if (lock == PMUX_PIN_LOCK_DEFAULT)
+ return 0;
+
+ reg = readl(pin_lock);
+ reg &= ~(0x1 << PMUX_LOCK_SHIFT);
+ if (lock == PMUX_PIN_LOCK_ENABLE)
+ reg |= (0x1 << PMUX_LOCK_SHIFT);
+ else {
+ /* lock == DISABLE, which isn't possible */
+ printf("%s: Warning: lock == %d, DISABLE is not allowed!\n",
+ __func__, lock);
+ }
+ writel(reg, pin_lock);
+
+ return 0;
+}
+
+static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_od = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and od */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_od_isvalid(od));
+
+ if (od == PMUX_PIN_OD_DEFAULT)
+ return 0;
+
+ reg = readl(pin_od);
+ reg &= ~(0x1 << PMUX_OD_SHIFT);
+ if (od == PMUX_PIN_OD_ENABLE)
+ reg |= (0x1 << PMUX_OD_SHIFT);
+ writel(reg, pin_od);
+
+ return 0;
+}
+
+static int pinmux_set_ioreset(enum pmux_pingrp pin,
+ enum pmux_pin_ioreset ioreset)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_ioreset = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and ioreset */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_ioreset_isvalid(ioreset));
+
+ if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+ return 0;
+
+ reg = readl(pin_ioreset);
+ reg &= ~(0x1 << PMUX_IO_RESET_SHIFT);
+ if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+ reg |= (0x1 << PMUX_IO_RESET_SHIFT);
+ writel(reg, pin_ioreset);
+
+ return 0;
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+ enum pmux_pingrp pin = config->pingroup;
+
+ pinmux_set_func(pin, config->func);
+ pinmux_set_pullupdown(pin, config->pull);
+ pinmux_set_tristate(pin, config->tristate);
+ pinmux_set_io(pin, config->io);
+ pinmux_set_lock(pin, config->lock);
+ pinmux_set_od(pin, config->od);
+ pinmux_set_ioreset(pin, config->ioreset);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ pinmux_config_pingroup(&config[i]);
+}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 32+ messages in thread* [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
2013-01-16 21:14 [U-Boot] [PATCH 0/7] Add support for NVIDIA Tegra114 SoC Tom Warren
` (5 preceding siblings ...)
2013-01-16 21:14 ` [U-Boot] [PATCH 6/7] Tegra114: Add generic Tegra114 build support Tom Warren
@ 2013-01-16 21:14 ` Tom Warren
2013-01-16 22:51 ` Stephen Warren
6 siblings, 1 reply; 32+ messages in thread
From: Tom Warren @ 2013-01-16 21:14 UTC (permalink / raw)
To: u-boot
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
board/nvidia/dalmore/Makefile | 44 +++++
board/nvidia/dalmore/dalmore.c | 39 ++++
board/nvidia/dalmore/pinmux-config-dalmore.h | 249 ++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/dalmore.h | 50 +++++
include/configs/tegra114-common.h | 89 +++++++++
6 files changed, 472 insertions(+), 0 deletions(-)
create mode 100644 board/nvidia/dalmore/Makefile
create mode 100644 board/nvidia/dalmore/dalmore.c
create mode 100644 board/nvidia/dalmore/pinmux-config-dalmore.h
create mode 100644 include/configs/dalmore.h
create mode 100644 include/configs/tegra114-common.h
diff --git a/board/nvidia/dalmore/Makefile b/board/nvidia/dalmore/Makefile
new file mode 100644
index 0000000..913f1ce
--- /dev/null
+++ b/board/nvidia/dalmore/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := $(BOARD).o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
new file mode 100644
index 0000000..f17c891
--- /dev/null
+++ b/board/nvidia/dalmore/dalmore.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-dalmore.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_table(tegra3_pinmux_common,
+ ARRAY_SIZE(tegra3_pinmux_common));
+
+ pinmux_config_table(unused_pins_lowpower,
+ ARRAY_SIZE(unused_pins_lowpower));
+}
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
new file mode 100644
index 0000000..d29a56a
--- /dev/null
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _PINMUX_CONFIG_DALMORE_H_
+#define _PINMUX_CONFIG_DALMORE_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+static struct pingroup_config tegra3_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_WP_N, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C1 pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C3 pinmux */
+ I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C4 pinmux */
+ I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* Power I2C pinmux */
+ I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1, UARTA, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV1, RSVD1, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS1_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS2_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* GPIOs */
+ /* SDMMC1 CD gpio */
+ DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT),
+
+ /* Touch RESET */
+ DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT),
+
+ /* Power rails GPIO */
+ DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+ DEFAULT_PINMUX(GMI_CS0_N, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS3_N, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS4_N, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+#endif /* _PINMUX_CONFIG_DALMORE_H_ */
diff --git a/boards.cfg b/boards.cfg
index b519bc4..bd2ae3d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -291,6 +291,7 @@ seaboard arm armv7:arm720t seaboard nvidia
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
cardhu arm armv7:arm720t cardhu nvidia tegra30
+dalmore arm armv7:arm720t dalmore nvidia tegra114
colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
new file mode 100644
index 0000000..788b507
--- /dev/null
+++ b/include/configs/dalmore.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+
+#include "tegra114-common.h"
+
+/* Must be off for Dalmore to boot !?!? FIXME */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra114 (Dalmore) # "
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+#define CONFIG_MACH_TYPE MACH_TYPE_DALMORE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ENV_IS_NOWHERE
+
+#define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
new file mode 100644
index 0000000..79380f8
--- /dev/null
+++ b/include/configs/tegra114-common.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA114_COMMON_H_
+#define _TEGRA114_COMMON_H_
+#include "tegra-common.h"
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_TEGRA114 /* in a NVidia Tegra114 core */
+
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */
+#define CONFIG_STACKBASE 0x82800000 /* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE 0x8010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x90000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE 0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
+#define CONFIG_SPL_STACK 0x800ffffc
+
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds"
+
+/* Total I2C ports on Tegra114 */
+#define TEGRA_I2C_NUM_CONTROLLERS 5
+
+#endif /* _TEGRA114_COMMON_H_ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 32+ messages in thread