* [U-Boot] Divide uboot into two parts
@ 2013-01-17 7:05 terryhuang
2013-01-17 8:44 ` Heiko Schocher
0 siblings, 1 reply; 2+ messages in thread
From: terryhuang @ 2013-01-17 7:05 UTC (permalink / raw)
To: u-boot
Hi,
Are there any ways to divide uboot into two parts, and burn into SPI NOR
Flash at different address?
Limitation: first part of uboot will less than 128KB.
Thanks.
-Terry
--
View this message in context: http://u-boot.10912.n7.nabble.com/Divide-uboot-into-two-parts-tp144917.html
Sent from the U-Boot mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Divide uboot into two parts
2013-01-17 7:05 [U-Boot] Divide uboot into two parts terryhuang
@ 2013-01-17 8:44 ` Heiko Schocher
0 siblings, 0 replies; 2+ messages in thread
From: Heiko Schocher @ 2013-01-17 8:44 UTC (permalink / raw)
To: u-boot
Hello terryhuang,
On 17.01.2013 08:05, terryhuang wrote:
> Are there any ways to divide uboot into two parts, and burn into SPI NOR
> Flash at different address?
Why did you need this?
> Limitation: first part of uboot will less than 128KB.
This sounds like you could use the SPL framework. But you did not
provide us some information about your hw, so it is hard to say, if
the current spl code is supported ... look into the doc/README.SPL
document in the u-boot source for more information about it.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-01-17 8:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-17 7:05 [U-Boot] Divide uboot into two parts terryhuang
2013-01-17 8:44 ` Heiko Schocher
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox