From mboxrd@z Thu Jan 1 00:00:00 1970 From: Troy Kisky Date: Tue, 22 Jan 2013 16:48:04 -0700 Subject: [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet In-Reply-To: <509E0212.3010609@denx.de> References: <1345502918-18305-1-git-send-email-troy.kisky@boundarydevices.com> <1350960047-23404-1-git-send-email-troy.kisky@boundarydevices.com> <509E0212.3010609@denx.de> Message-ID: <50FF2534.4090306@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/10/2012 12:28 AM, Stefano Babic wrote: > On 23/10/2012 04:40, Troy Kisky wrote: >> This series tries to separate the mii regsisters >> from the ethernet registers as suggested by >> Andy Fleming. Then, mx6qsabrelite is changed >> to find the phy address from the possibles 4-7. >> >> The V3 series is very different from V2. >> >> Troy Kisky (9): >> doc/README.fec_mxc: add documentation >> net: fec_mxc: delete CONFIG_FEC_MXC_MULTI >> net: fec_mxc: change fec_mii_setspeed parameter >> net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi >> phy: add phy_find_by_mask/phy_connect_dev >> net: fec_mxc: use fec_set_dev_name to set name >> net: fec_mxc: only call phy_connect in fec_probe >> net: fec_mxc: get phydev before fec_probe >> mx6qsabrelite: search mii phy address 4-7 >> > Hi Joe, > >> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +++- >> doc/README.fec_mxc | 27 ++++ >> drivers/net/fec_mxc.c | 164 ++++++++++++++----------- >> drivers/net/fec_mxc.h | 2 +- >> drivers/net/phy/phy.c | 128 +++++++++++-------- >> include/configs/m28evk.h | 1 - >> include/configs/mx28evk.h | 1 - >> include/configs/sc_sps_1.h | 1 - >> include/netdev.h | 7 ++ >> include/phy.h | 3 + >> 10 files changed, 227 insertions(+), 131 deletions(-) >> create mode 100644 doc/README.fec_mxc > Patches are assigned to me in patchworks. Do you have any issue with > this patchset ? If it is ok for you, I will apply it to u-boot-imx. > > Best regards, > Stefano > > Who should I pester to see some progress on this ? Thanks Troy