From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Date: Wed, 23 Jan 2013 10:04:56 +0100 [thread overview]
Message-ID: <50FFA7B8.1090709@denx.de> (raw)
In-Reply-To: <CAP9ODKrtpXSMszzbNNcPBjioHf0fNfw4fujFjPuyR1EguKO57A@mail.gmail.com>
On 22/01/2013 02:56, Otavio Salvador wrote:
> On Mon, Jan 21, 2013 at 11:50 PM, Marek Vasut <marex@denx.de> wrote:
>> Dear Otavio Salvador,
>>
>> NAK. DMA works on MX28 and works in Linux on MX23, therefore the DMA is not
>> broken on either. Thus there's no reason to introduce such "force_pio" stuff.
>
> Lack of time to work on it is one reason. I won't be able to work on
> it for some days and I prefer a working solution than skip it for
> another release.
>
> --
> Otavio Salvador O.S. Systems
> E-mail: otavio at ossystems.com.br http://www.ossystems.com.br
> Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
>
Hi Otavio, hi Marek,
let me say some words about this discussion. I agree that if there is no
support for DMA for MX23, we could add support with PIO mode. However,
there should be a very good reason, because as far as I understand,
added support for DMA is valid for mxs platform. The solution introduced
with this patchset lets also the door open for people that can use MX28
in PIO mode. I think (I have already seen in ML Marek's patchset for it)
the way to fix DMA for mx23 and then add support for MMC is the rught
way to do.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2013-01-23 9:04 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 1:47 [U-Boot] [PATCH 0/9] iMX23 MMC support and environment addition Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 1/9] mx23: Add SSP registers map Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode Otavio Salvador
2013-01-22 1:45 ` Marek Vasut
2013-01-22 1:53 ` Otavio Salvador
2013-01-22 2:01 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI Otavio Salvador
2013-01-22 1:46 ` Marek Vasut
2013-01-22 1:55 ` Otavio Salvador
2013-01-22 2:00 ` Marek Vasut
2013-01-24 18:14 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 4/9] mx23evk: Add initial board support Otavio Salvador
2013-01-22 1:46 ` Marek Vasut
2013-01-22 2:02 ` Otavio Salvador
2013-01-22 2:16 ` Marek Vasut
2013-01-22 2:30 ` Fabio Estevam
2013-01-22 2:42 ` Marek Vasut
2013-01-22 10:05 ` Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support Otavio Salvador
2013-01-22 1:47 ` Marek Vasut
2013-01-22 1:58 ` Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection Otavio Salvador
2013-01-22 1:48 ` Marek Vasut
2013-01-22 1:58 ` Otavio Salvador
2013-01-22 1:59 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment Otavio Salvador
2013-01-22 1:49 ` Marek Vasut
2013-01-22 2:00 ` Otavio Salvador
2013-01-22 2:34 ` Fabio Estevam
2013-01-22 1:47 ` [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23 Otavio Salvador
2013-01-22 1:49 ` Marek Vasut
2013-01-22 2:03 ` Otavio Salvador
2013-01-22 2:15 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC Otavio Salvador
2013-01-22 1:50 ` Marek Vasut
2013-01-22 1:56 ` Otavio Salvador
2013-01-22 1:59 ` Marek Vasut
2013-01-23 9:04 ` Stefano Babic [this message]
2013-01-23 11:05 ` Otavio Salvador
2013-01-23 11:26 ` Marek Vasut
2013-01-23 11:39 ` Stefano Babic
2013-01-23 11:48 ` Marek Vasut
2013-01-23 12:12 ` Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50FFA7B8.1090709@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox