From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Date: Wed, 23 Jan 2013 12:39:42 +0100 [thread overview]
Message-ID: <50FFCBFE.3040908@denx.de> (raw)
In-Reply-To: <201301231226.58545.marex@denx.de>
On 23/01/2013 12:26, Marek Vasut wrote:
>>> Hi Otavio, hi Marek,
>>>
>>> let me say some words about this discussion. I agree that if there is no
>>> support for DMA for MX23, we could add support with PIO mode. However,
>>> there should be a very good reason, because as far as I understand,
>>> added support for DMA is valid for mxs platform. The solution introduced
>>> with this patchset lets also the door open for people that can use MX28
>>> in PIO mode. I think (I have already seen in ML Marek's patchset for it)
>>> the way to fix DMA for mx23 and then add support for MMC is the rught
>>> way to do.
>>
>> So you'd like to have this patch ported to Marek's patchset so the
>> support for PIO mode is kept available? Instead of enabling it for
>> MX23 we can have a config option which allows force PIO mode and
>> disable DMA. This is what you want?
>
> Forcing PIO is nonsense, why would it be of any use?
No, I agree with Marek - if DMA is then working also for MX23, we do not
need PIO at all.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2013-01-23 11:39 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 1:47 [U-Boot] [PATCH 0/9] iMX23 MMC support and environment addition Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 1/9] mx23: Add SSP registers map Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode Otavio Salvador
2013-01-22 1:45 ` Marek Vasut
2013-01-22 1:53 ` Otavio Salvador
2013-01-22 2:01 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI Otavio Salvador
2013-01-22 1:46 ` Marek Vasut
2013-01-22 1:55 ` Otavio Salvador
2013-01-22 2:00 ` Marek Vasut
2013-01-24 18:14 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 4/9] mx23evk: Add initial board support Otavio Salvador
2013-01-22 1:46 ` Marek Vasut
2013-01-22 2:02 ` Otavio Salvador
2013-01-22 2:16 ` Marek Vasut
2013-01-22 2:30 ` Fabio Estevam
2013-01-22 2:42 ` Marek Vasut
2013-01-22 10:05 ` Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support Otavio Salvador
2013-01-22 1:47 ` Marek Vasut
2013-01-22 1:58 ` Otavio Salvador
2013-01-22 1:47 ` [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection Otavio Salvador
2013-01-22 1:48 ` Marek Vasut
2013-01-22 1:58 ` Otavio Salvador
2013-01-22 1:59 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment Otavio Salvador
2013-01-22 1:49 ` Marek Vasut
2013-01-22 2:00 ` Otavio Salvador
2013-01-22 2:34 ` Fabio Estevam
2013-01-22 1:47 ` [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23 Otavio Salvador
2013-01-22 1:49 ` Marek Vasut
2013-01-22 2:03 ` Otavio Salvador
2013-01-22 2:15 ` Marek Vasut
2013-01-22 1:47 ` [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC Otavio Salvador
2013-01-22 1:50 ` Marek Vasut
2013-01-22 1:56 ` Otavio Salvador
2013-01-22 1:59 ` Marek Vasut
2013-01-23 9:04 ` Stefano Babic
2013-01-23 11:05 ` Otavio Salvador
2013-01-23 11:26 ` Marek Vasut
2013-01-23 11:39 ` Stefano Babic [this message]
2013-01-23 11:48 ` Marek Vasut
2013-01-23 12:12 ` Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50FFCBFE.3040908@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox