From mboxrd@z Thu Jan  1 00:00:00 1970
From: Prabhakar Kushwaha <prabhakar@freescale.com>
Date: Thu, 24 Jan 2013 08:58:24 +0530
Subject: [U-Boot] [PATCH] board/common: Add support for QIXIS read/write
 using i2c
In-Reply-To: <CAKWjMd4CCBmC+prdp4O9SQV6x3kHONrW=LNkyZOe7jGO5Q_npw@mail.gmail.com>
References: <1358223982-2507-1-git-send-email-prabhakar@freescale.com>
	<CAKWjMd4CCBmC+prdp4O9SQV6x3kHONrW=LNkyZOe7jGO5Q_npw@mail.gmail.com>
Message-ID: <5100AA58.9090500@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 01/24/2013 03:36 AM, Andy Fleming wrote:
>
>
>     +u8 qixis_read_i2c(unsigned int reg)
>     +{
>     +       return i2c_reg_read(CONFIG_SYS_I2C_FPGA_ADDR, reg);
>     +}
>     +
>     +void qixis_write_i2c(unsigned int reg, u8 value)
>     +{
>     +       u8 val = value;
>     +       i2c_reg_write(CONFIG_SYS_I2C_FPGA_ADDR, reg, val);
>     +}
>     +
>
>
>
> This breaks ALL other boards with QIXIS, as they don't all define 
> CONFIG_SYS_I2C_FPGA_ADDR.

oh..
Then, I will put this code under #ifdef CONFIG_SYS_I2C_FPGA_ADDR and 
provide v2 version of this patch.

Regards,
Prabhakar