[U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23

[Stefano Babic <sbabic@denx.de>]

On 23/01/2013 02:01, Marek Vasut wrote:
> The MX23 has less channels for the APBH DMA, sligtly different register
> layout and some bits in those registers are placed differently. Reflect
> this in the driver. This patch fixes MMC/DMA issue on MX23.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  arch/arm/include/asm/arch-mxs/regs-apbh.h |  121 +++++++++++++++++++++++++++++
>  drivers/dma/apbh_dma.c                    |   10 ++-
>  2 files changed, 129 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-mxs/regs-apbh.h b/arch/arm/include/asm/arch-mxs/regs-apbh.h
> index e18e677..fcef4b8 100644
> --- a/arch/arm/include/asm/arch-mxs/regs-apbh.h
> +++ b/arch/arm/include/asm/arch-mxs/regs-apbh.h
> @@ -29,6 +29,87 @@
>  #include <asm/arch/regs-common.h>
>  
>  #ifndef	__ASSEMBLY__
> +
> +#if defined(CONFIG_MX23)
> +struct mxs_apbh_regs {
> +	mxs_reg_32(hw_apbh_ctrl0)
> +	mxs_reg_32(hw_apbh_ctrl1)
> +	mxs_reg_32(hw_apbh_ctrl2)
> +	mxs_reg_32(hw_apbh_channel_ctrl)

I see there are diffrent definitions, but why do not we set a common
name (as an alias) ?

Such as:
#define hw_ahph_ctrl_set hw_apbh_ctrl0


> +#if defined(CONFIG_MX23)
> +	uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
> +	uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;

and we could drop the #ifdef in the driver file.


Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================