From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mmc: support the correct card version for eMMC
Date: Thu, 31 Jan 2013 20:55:59 +0900 [thread overview]
Message-ID: <510A5BCF.7050407@samsung.com> (raw)
In-Reply-To: <5108B024.2040606@samsung.com>
Hi Rommel,
Could you review or test for this?
Best Regards,
Jaehoon Chung
On 01/30/2013 02:31 PM, Jaehoon Chung wrote:
> eMMC vesrion is supported up to v4.5.
> But bootloader isn't saw the exact eMMC version.
> After applied this patch,
> if use the mmcinfo command, then can see the exactly mmc version.
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> common/cmd_mmc.c | 2 +-
> drivers/mmc/mmc.c | 18 ++++++++++++++++++
> include/mmc.h | 21 +++++++++++++--------
> 3 files changed, 32 insertions(+), 9 deletions(-)
>
> diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
> index 7dacd51..9e8d293 100644
> --- a/common/cmd_mmc.c
> +++ b/common/cmd_mmc.c
> @@ -106,7 +106,7 @@ static void print_mmcinfo(struct mmc *mmc)
> printf("Rd Block Len: %d\n", mmc->read_bl_len);
>
> printf("%s version %d.%d\n", IS_SD(mmc) ? "SD" : "MMC",
> - (mmc->version >> 4) & 0xf, mmc->version & 0xf);
> + (mmc->version >> 8) & 0xf, mmc->version & 0xff);
>
> printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
> puts("Capacity: ");
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 72e8ce6..3b3317e 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -1029,6 +1029,24 @@ static int mmc_startup(struct mmc *mmc)
> mmc->capacity = capacity;
> }
>
> + switch (ext_csd[EXT_CSD_REV]) {
> + case 1:
> + mmc->version = MMC_VERSION_4_1;
> + break;
> + case 2:
> + mmc->version = MMC_VERSION_4_2;
> + break;
> + case 3:
> + mmc->version = MMC_VERSION_4_3;
> + break;
> + case 5:
> + mmc->version = MMC_VERSION_4_41;
> + break;
> + case 6:
> + mmc->version = MMC_VERSION_4_5;
> + break;
> + }
> +
> /*
> * Check whether GROUP_DEF is set, if yes, read out
> * group size from ext_csd directly, or calculate
> diff --git a/include/mmc.h b/include/mmc.h
> index a13e2bd..d0ec744 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -30,16 +30,21 @@
> #include <linux/compiler.h>
>
> #define SD_VERSION_SD 0x20000
> -#define SD_VERSION_2 (SD_VERSION_SD | 0x20)
> -#define SD_VERSION_1_0 (SD_VERSION_SD | 0x10)
> -#define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a)
> +#define SD_VERSION_2 (SD_VERSION_SD | 0x200)
> +#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100)
> +#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
> #define MMC_VERSION_MMC 0x10000
> #define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC)
> -#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x12)
> -#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x14)
> -#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x22)
> -#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x30)
> -#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x40)
> +#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102)
> +#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104)
> +#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202)
> +#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300)
> +#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400)
> +#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401)
> +#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402)
> +#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
> +#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
> +#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
>
> #define MMC_MODE_HS 0x001
> #define MMC_MODE_HS_52MHz 0x010
>
next prev parent reply other threads:[~2013-01-31 11:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-30 5:31 [U-Boot] [PATCH] mmc: support the correct card version for eMMC Jaehoon Chung
2013-01-31 11:55 ` Jaehoon Chung [this message]
2013-02-01 22:03 ` Rommel Custodio
2013-04-17 15:37 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=510A5BCF.7050407@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox