[U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR

[Tom Rini <trini@ti.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 01/30/2013 03:10 AM, Kim B?ndergaard Poulsen wrote:
> Hi Tom
> 
> 
>> -----Original Message----- From: Tom Rini [mailto:trini at ti.com] 
>> Sent: 29. januar 2013 21:32 To: Kim B?ndergaard Poulsen Cc: 
>> u-boot at lists.denx.de; vapier at gentoo.org; manjunath.hadli at ti.com 
>> Subject: Re: [PATCH 1/2] Davinci: Make MAC address offset in 
>> EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
>> 
> On 01/29/2013 02:28 AM, Kim B?ndergaard wrote:
>>>> --- arch/arm/cpu/arm926ejs/davinci/misc.c | 5 ++++- 1 file 
>>>> changed, 4 insertions(+), 1 deletion(-)
>>>> 
>>>> diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c 
>>>> b/arch/arm/cpu/arm926ejs/davinci/misc.c index 
>>>> c310c69..d0389a4 100644 --- 
>>>> a/arch/arm/cpu/arm926ejs/davinci/misc.c +++ 
>>>> b/arch/arm/cpu/arm926ejs/davinci/misc.c @@ -55,11 +55,14 @@ 
>>>> void dram_init_banksize(void) * Read ethernet MAC address 
>>>> from EEPROM for DVEVM compatible boards. * Returns 1 if 
>>>> found, 0 otherwise. */ +#ifndef CONFIG_MAC_EEPROM_ADDR 
>>>> +#define
> CONFIG_MAC_EEPROM_ADDR
>>>> 0x7F00 +#endif int dvevm_read_mac_address(uint8_t *buf) { 
>>>> #ifdef CONFIG_SYS_I2C_EEPROM_ADDR /* Read MAC address. */ - 
>>>> if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00, +	if 
>>>> (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
> CONFIG_MAC_EEPROM_ADDR,
>>>> CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6))
>>>> goto i2cerr;
> 
> Lets use CONFIG_SYS_I2C_EEPROM_MAC_OFFSET and just set it in all
> of the davinci configs (yes, that's touching more files).  Thanks!
> 
> 
>> So what you suggest is to add a #define 
>> CONFIG_SYS_I2C_EEPROM_MAC_OFFSET 0x7F00
> 
>> in all DAVINCI related include/configs/*.h ?
> 
>> Also I assume you want me to remove the #ifdef 
>> CONFIG_SYS_I2C_EEPROM_MAC_OFFSET in misc.c?
> 
>> My only problem is that I don't know if it makes sense to define 
>> it for all boards
> 
>> grep -l DAVINCI * in include/configs gives me the following 
>> files: calimain.h cam_enc_4xx.h da830evm.h da850evm.h 
>> davinci_dm355evm.h davinci_dm355leopard.h davinci_dm365evm.h 
>> davinci_dm6467evm.h davinci_dvevm.h davinci_schmoogie.h 
>> davinci_sffsdr.h davinci_sonata.h ea20.h enbw_cmc.h hawkboard.h 
>> tnetv107x_evm.h
> 
>> Anyone who knows if they all have I2C eeproms

The subset of these with CONFIG_SYS_I2C_EEPROM set to start with,
should as they have been reading there already.  Cc'ing the various
board maintainers with the patch would be good.

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=zDPr
-----END PGP SIGNATURE-----