From mboxrd@z Thu Jan  1 00:00:00 1970
From: Minkyu Kang <mk7.kang@samsung.com>
Date: Wed, 13 Feb 2013 14:46:40 +0900
Subject: [U-Boot] [PATCH 1/2 V2] EXYNOS5: Add function to setup set ps
	hold
In-Reply-To: <1358935677-10876-2-git-send-email-rajeshwari.s@samsung.com>
References: <1358935677-10876-1-git-send-email-rajeshwari.s@samsung.com>
	<1358935677-10876-2-git-send-email-rajeshwari.s@samsung.com>
Message-ID: <511B28C0.2020007@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Rajeshwari,

On 23/01/13 19:07, Rajeshwari Shinde wrote:
> This patch adds a function to set ps_hold data driving value high.
> This enables the machine to stay powered on after the initial
> power-on condition goes away(e.g. power button).
> 
> Acked-by: Simon Glass <sjg@chromium.org>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> Changes in V2:
> 	- Corrected the multi line comment style
>  arch/arm/cpu/armv7/exynos/power.c        |   10 ++++++++++
>  arch/arm/include/asm/arch-exynos/power.h |    9 +++++++++
>  2 files changed, 19 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
> index d4bce6d..8572cfd 100644
> --- a/arch/arm/cpu/armv7/exynos/power.c
> +++ b/arch/arm/cpu/armv7/exynos/power.c
> @@ -95,3 +95,13 @@ void set_dp_phy_ctrl(unsigned int enable)
>  	if (cpu_is_exynos5())
>  		exynos5_dp_phy_control(enable);
>  }
> +
> +void power_ps_hold_setup(void)

Could you please modify function's name as other functions?
(e.g: set_*)

> +{
> +	struct exynos5_power *power =
> +		(struct exynos5_power *)samsung_get_base_power();
> +
> +	/* Set PS-Hold high */
> +	setbits_le32(&power->ps_hold_control,
> +			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
> +}

This function should support exynos4 also.
Please refer other functions.
 
> diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
> index d2fdb59..8384cbb 100644
> --- a/arch/arm/include/asm/arch-exynos/power.h
> +++ b/arch/arm/include/asm/arch-exynos/power.h
> @@ -864,4 +864,13 @@ void set_dp_phy_ctrl(unsigned int enable);
>  
>  #define EXYNOS_DP_PHY_ENABLE		(1 << 0)
>  
> +#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH	(1 << 8)
> +
> +/*
> + * Set ps_hold data driving value high
> + * This enables the machine to stay powered on
> + * after the initial power-on condition goes away
> + * (e.g. power button).
> + */
> +void power_ps_hold_setup(void);
>  #endif
> 

Thanks.
Minkyu Kang.