From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?Q?Beno=C3=AEt_Th=C3=A9baudeau?= Date: Fri, 19 Apr 2013 11:35:16 +0200 (CEST) Subject: [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl In-Reply-To: <468084683.1869068.1366360728037.JavaMail.root@advansee.com> References: <1366344655-8535-1-git-send-email-marex@denx.de> <1366344655-8535-2-git-send-email-marex@denx.de> <468084683.1869068.1366360728037.JavaMail.root@advansee.com> Message-ID: <512050154.1871290.1366364116628.JavaMail.root@advansee.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday, April 19, 2013 10:38:48 AM, Beno?t Th?baudeau wrote: > Dear Marek Vasut, > > On Friday, April 19, 2013 6:10:51 AM, Marek Vasut wrote: > > Add support for generic NAND SPL via the SPL framework into the > > mxc_nand_spl driver. This is basically just a simple rename and > > publication of the already implemented functions. To avoid the > > old function which are used with the nand_spl/ stuff getting in > > the way of NAND SPL framework, the macro CONFIG_SPL_NAND_LEGACY > > was introduced and two remaining legacy boards were adjusted. > > These board need to be either fixed or removed in the long run, > > but I don't have either. > > > > Also make sure the requested payload is aligned to full pages, > > otherwise this simple driver fails to load the last page. > > > > Signed-off-by: Marek Vasut > > Cc: Albert ARIBAUD > > Cc: Beno?t Th?baudeau > > Cc: Fabio Estevam > > Cc: Scott Wood > > Cc: Stefano Babic > > Cc: Tom Rini > > --- > > drivers/mtd/nand/mxc_nand_spl.c | 13 ++++++++++--- > > include/configs/mx31pdk.h | 1 + > > include/configs/tx25.h | 1 + > > 3 files changed, 12 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/mtd/nand/mxc_nand_spl.c > > b/drivers/mtd/nand/mxc_nand_spl.c > > index 09f23c3..8ff03c9 100644 > > --- a/drivers/mtd/nand/mxc_nand_spl.c > > +++ b/drivers/mtd/nand/mxc_nand_spl.c > > @@ -290,7 +290,7 @@ static int is_badblock(int pagenumber) > > return 0; > > } > > > > -static int nand_load(unsigned int from, unsigned int size, unsigned char > > *buf) > > +int nand_spl_load_image(uint32_t from, unsigned int size, void *buf) > > { > > int i; > > unsigned int page; > > @@ -303,6 +303,7 @@ static int nand_load(unsigned int from, unsigned int > > size, unsigned char *buf) > > page = from / CONFIG_SYS_NAND_PAGE_SIZE; > > i = 0; > > > > + size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE); > > while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) { > > if (nfc_read_page(page, buf) < 0) > > return -1; > > @@ -332,6 +333,7 @@ static int nand_load(unsigned int from, unsigned int > > size, unsigned char *buf) > > return 0; > > } > > > > +#ifdef CONFIG_SPL_NAND_SUPPORT_LEGACY > > /* > > * The main entry for NAND booting. It's necessary that SDRAM is already > > * configured and available since this code loads the main U-Boot image > > @@ -345,8 +347,9 @@ void nand_boot(void) > > * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must > > * be aligned to full pages > > */ > > - if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, > > - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { > > + if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, > > + CONFIG_SYS_NAND_U_BOOT_SIZE, > > + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { > > /* Copy from NAND successful, start U-boot */ > > uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; > > uboot(); > > @@ -364,3 +367,7 @@ void hang(void) > > /* Loop forever */ > > while (1) ; > > } > > +#endif > > + > > +void nand_init(void) {} > > +void nand_deselect(void) {} > > diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h > > index 1754595..217552e 100644 > > --- a/include/configs/mx31pdk.h > > +++ b/include/configs/mx31pdk.h > > @@ -50,6 +50,7 @@ > > #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" > > #define CONFIG_SPL_MAX_SIZE 2048 > > #define CONFIG_SPL_NAND_SUPPORT > > +#define CONFIG_SPL_NAND_SUPPORT_LEGACY > > > > #define CONFIG_SPL_TEXT_BASE 0x87dc0000 > > #define CONFIG_SYS_TEXT_BASE 0x87e00000 > > diff --git a/include/configs/tx25.h b/include/configs/tx25.h > > index e72f8f6..7c362d0 100644 > > --- a/include/configs/tx25.h > > +++ b/include/configs/tx25.h > > @@ -37,6 +37,7 @@ > > #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" > > #define CONFIG_SPL_MAX_SIZE 2048 > > #define CONFIG_SPL_NAND_SUPPORT > > +#define CONFIG_SPL_NAND_SUPPORT_LEGACY > > > > #define CONFIG_SPL_TEXT_BASE 0x810c0000 > > #define CONFIG_SYS_TEXT_BASE 0x81200000 > > -- > > 1.7.11.7 > > This is not about legacy vs. non-legacy. This is about basic vs. more > featured > SPL because of SPL size constraints. So what about dropping > CONFIG_SPL_NAND_SUPPORT_LEGACY and testing for CONFIG_SPL_FRAMEWORK > definition > instead? Also, I don't see any nand_init() (called by spl_nand_load_image()) for m53evk. Best regards, Beno?t