From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bo Shen Date: Mon, 18 Feb 2013 11:09:04 +0800 Subject: [U-Boot] [PATCH] ARM: atmel: add at91sam9g20ek_2mmc nand boot support In-Reply-To: <1359510206-26447-1-git-send-email-voice.shen@atmel.com> References: <1359510206-26447-1-git-send-email-voice.shen@atmel.com> Message-ID: <51219B50.7050806@atmel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Andreas, On 01/30/2013 09:43 AM, Bo Shen wrote: > Add at91sam9g20_2mmc nand boot support. on this board, there is no > dataflash, so disable it > > change one commet for at91sam9g20ek board > > Signed-off-by: Bo Shen > --- > board/atmel/at91sam9260ek/at91sam9260ek.c | 7 ++++++- > boards.cfg | 1 + > include/configs/at91sam9260ek.h | 2 ++ > 3 files changed, 9 insertions(+), 1 deletion(-) ping? > diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c > index 2555672..3aa394a 100644 > --- a/board/atmel/at91sam9260ek/at91sam9260ek.c > +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c > @@ -157,13 +157,18 @@ int board_early_init_f(void) > > int board_init(void) > { > +#ifdef CONFIG_AT91SAM9G20EK_2MMC > + /* arch number of AT91SAM9G20EK_2MMC-Board */ > + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; > +#else > #ifdef CONFIG_AT91SAM9G20EK > - /* arch number of AT91SAM9260EK-Board */ > + /* arch number of AT91SAM9G20EK-Board */ > gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; > #else > /* arch number of AT91SAM9260EK-Board */ > gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; > #endif > +#endif > /* adress of boot parameters */ > gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; > > diff --git a/boards.cfg b/boards.cfg > index e4b0d44..fa863dc 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -95,6 +95,7 @@ at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel > at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 > at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 > at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH > +at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH > at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH > at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH > at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH > diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h > index f921fac..02696b3 100644 > --- a/include/configs/at91sam9260ek.h > +++ b/include/configs/at91sam9260ek.h > @@ -126,6 +126,7 @@ > #endif > > /* DataFlash */ > +#ifndef CONFIG_AT91SAM9G20EK_2MMC > #define CONFIG_ATMEL_DATAFLASH_SPI > #define CONFIG_HAS_DATAFLASH 1 > #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) > @@ -133,6 +134,7 @@ > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ > #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ > #define AT91_SPI_CLK 15000000 > +#endif > > #ifdef CONFIG_AT91SAM9G20EK > #define DATAFLASH_TCSS (0x22<< 16)