From mboxrd@z Thu Jan  1 00:00:00 1970
From: NeonJohn <jgd@neon-john.com>
Date: Tue, 19 Feb 2013 19:12:05 -0500
Subject: [U-Boot] SPI question
Message-ID: <512414D5.2080300@neon-john.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

Veteran developer, new to Linux internals.  I'm working with the
BeagleBone and need three SPI ports.  I'm now working to enable the
second chip select on the second port.  I need some basic information to
get started.

Is the port initialization done in u-boot or in the kernel?  In
beagle/beagle.h I found the pins nicely enumerated but that file is
apparently for the BeagleBoard, as it doesn't get built during a bone build.

If the initialization is done in u-boot, could someone suggest the file
to look at?

Thanks,

John

-- 
John DeArmond
Tellico Plains, Occupied TN
http://www.fluxeon.com      <-- THE source for induction heaters
http://www.neon-john.com    <-- email from here
http://www.johndearmond.com <-- Best damned Blog on the net
PGP key: wwwkeys.pgp.net: BCB68D77