From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Jackson Date: Mon, 04 Mar 2013 11:27:20 +0000 Subject: [U-Boot] [PATCH v4] Allow AM335x MPU core clock speed to be specified in the board config file Message-ID: <51348518.2020901@mimc.co.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:- #define CONFIG_SYS_MPUCLK Signed-off-by: Mark Jackson --- Changes in v4: - Now defined as MHz (not Hz) Changes in v3: - Changed from V_MPUCLK to CONFIG_SYS_MPUCLK - Added entry in README Changes in v2: - Tweaked after comments from Peter Korsgaard README | 4 ++++ arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 7 +++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/README b/README index d8cb394..ddf6df2 100644 --- a/README +++ b/README @@ -3820,6 +3820,10 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. +- CONFIG_SYS_MPUCLK + Defines the MPU clock speed (in MHz). + + NOTE : currently only supported on AM335x platforms. Freescale QE/FMAN Firmware Support: ----------------------------------- diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index d748dd2..2d96007 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -21,8 +21,11 @@ #define OSC (V_OSCK/1000000) -/* MAIN PLL Fdll = 550 MHZ, */ -#define MPUPLL_M 550 +/* MAIN PLL Fdll = 550 MHz, by default */ +#ifndef CONFIG_SYS_MPUCLK +#define CONFIG_SYS_MPUCLK 550 +#endif +#define MPUPLL_M CONFIG_SYS_MPUCLK #define MPUPLL_N (OSC-1) #define MPUPLL_M2 1 -- 1.7.9.5