From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations
Date: Wed, 15 May 2013 00:12:24 +0200 (CEST) [thread overview]
Message-ID: <513800182.822768.1368569544454.JavaMail.root@advansee.com> (raw)
In-Reply-To: <1368561780-19104-5-git-send-email-albert.u.boot@aribaud.net>
Hi Albert,
On Tuesday, May 14, 2013 10:02:59 PM, Albert ARIBAUD wrote:
> Add a Makefile target ('checkarmreloc') which
> fails of the ELF binary contains relocation records
> of types other than R_ARM_RELATIVE.
>
> Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
> ---
> Makefile | 7 +++++++
> arch/arm/config.mk | 5 +++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/Makefile b/Makefile
> index c52f0f1..9aa5755 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -746,6 +746,13 @@ tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
> $(MAKE) -C $@ all
> endif # config.mk
>
> +# ARM relocations should all be R_ARM_RELATIVE.
> +checkarmreloc: $(obj)u-boot
> + @if test "R_ARM_RELATIVE" != \
> + "`readelf -r $(obj)u-boot | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
^
or $$< to avoid a duplicate?
> + then echo "$(obj)u-boot contains relocations other than \
^
or $$< too, or no $(obj) prefix@all for this message?
> + R_ARM_RELATIVE"; false; fi
> +
> $(VERSION_FILE):
> @mkdir -p $(dir $(VERSION_FILE))
> @( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
> diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> index 461899e..5b7a602 100644
> --- a/arch/arm/config.mk
> +++ b/arch/arm/config.mk
> @@ -106,3 +106,8 @@ ifeq ($(GAS_BUG_12532),y)
> PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
> endif
> endif
> +
> +# check that only R_ARM_RELATIVE relocations are generated
> +ifneq ($(CONFIG_SPL_BUILD),y)
> +ALL-y += checkarmreloc
> +endif
> --
> 1.7.10.4
Best regards,
Beno?t
next prev parent reply other threads:[~2013-05-14 22:12 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-14 20:02 [U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 1/5] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 2/5] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Albert ARIBAUD
2013-05-14 20:02 ` [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-05-14 20:03 ` [U-Boot] [PATCH 5/5] arm: optimize relocate_code routine Albert ARIBAUD
2013-05-14 23:54 ` Benoît Thébaudeau
2013-05-15 7:32 ` Albert ARIBAUD
2013-05-14 22:12 ` Benoît Thébaudeau [this message]
2013-05-15 7:46 ` [U-Boot] [PATCH 4/5] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-05-15 9:38 ` Albert ARIBAUD
2013-05-15 13:49 ` Benoît Thébaudeau
2013-05-15 15:01 ` Albert ARIBAUD
2013-05-14 22:09 ` [U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated Benoît Thébaudeau
2013-05-15 6:39 ` Albert ARIBAUD
2013-05-15 6:41 ` Albert ARIBAUD
2013-05-14 20:16 ` [U-Boot] [PATCH 0/5] Optimize ARM relocation Albert ARIBAUD
2013-05-14 23:58 ` Benoît Thébaudeau
2013-05-15 7:49 ` Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 0/6] " Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 2/6] remove all references to .dynsym Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 3/6] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 5/6] arm: make __rel_dyn_{start, " Albert ARIBAUD
2013-05-28 7:01 ` [U-Boot] [PATCH v2 6/6] arm: optimize relocate_code routine Albert ARIBAUD
2013-05-28 17:11 ` [U-Boot] [PATCH v2 4/6] arm: make __image_copy_{start, end} compiler-generated Benoît Thébaudeau
2013-05-28 17:04 ` [U-Boot] [PATCH v2 1/6] arm: ensure u-boot only uses relative relocations Benoît Thébaudeau
2013-05-28 17:31 ` Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 0/6] Optimize ARM relocation Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 1/6] arm: ensure u-boot only uses relative relocations Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 2/6] remove all references to .dynsym Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 3/6] arm: generalize lib/bss.c into lib/sections.c Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 4/6] arm: make __image_copy_{start, end} compiler-generated Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 5/6] arm: make __rel_dyn_{start, " Albert ARIBAUD
2013-06-11 12:17 ` [U-Boot] [PATCH v3 6/6] arm: optimize relocate_code routine Albert ARIBAUD
2013-06-11 12:47 ` [U-Boot] [PATCH v3 0/6] Optimize ARM relocation Albert ARIBAUD
2013-06-11 14:22 ` Lubomir Popov
2013-06-11 15:29 ` Albert ARIBAUD
2013-06-13 9:05 ` Albert ARIBAUD
2013-06-13 18:54 ` Jeroen Hofstee
2013-06-16 13:33 ` Jeroen Hofstee
2013-06-18 14:54 ` Albert ARIBAUD
2013-06-19 7:31 ` [U-Boot] [LONG] " Albert ARIBAUD
2013-06-12 22:38 ` [U-Boot] " Benoît Thébaudeau
2013-06-21 21:07 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=513800182.822768.1368569544454.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox