[U-Boot] [PATCH 1/4] USB: ohci-at91: support sama5d3x devices

["Andreas Bießmann" <andreas.devel@googlemail.com>]

Dear Bo Shen,

On 28.02.13 08:00, Bo Shen wrote:
> Add OHCI support for sama5d3x devices
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
>  drivers/usb/host/ohci-at91.c |   14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index efd711d..35a282e 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -42,7 +42,7 @@ int usb_cpu_init(void)
>  	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
>  		;
>  #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> -	defined(CONFIG_AT91SAM9X5)
> +	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)

I think these ifdeffery increases alarmingly here and there. Can we find
a better solution like

#if defined(ATMEL_OHCI_NEEDS_UPLL)

or whatever we can call it. I mean to classify this and enable it in the
respective SoC headers. Maybe here we can distinguish upon the IP version?

>  	/* Enable UPLL */
>  	writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
>  		&pmc->uckr);
> @@ -54,7 +54,12 @@ int usb_cpu_init(void)
>  #endif
>  
>  	/* Enable USB host clock. */
> +#if defined(CONFIG_SAMA5D3)

I think this ifdef is Ok instead.

> +	writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1);
> +#else
>  	writel(1 << ATMEL_ID_UHP, &pmc->pcer);
> +#endif
> +
>  #ifdef CONFIG_AT91SAM9261
>  	writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
>  #else
> @@ -69,7 +74,12 @@ int usb_cpu_stop(void)
>  	at91_pmc_t *pmc	= (at91_pmc_t *)ATMEL_BASE_PMC;
>  
>  	/* Disable USB host clock. */
> +#if defined(CONFIG_SAMA5D3)
> +	writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcdr1);
> +#else
>  	writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
> +#endif
> +
>  #ifdef CONFIG_AT91SAM9261
>  	writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
>  #else
> @@ -83,7 +93,7 @@ int usb_cpu_stop(void)
>  	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
>  		;
>  #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> -	defined(CONFIG_AT91SAM9X5)
> +	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
>  	/* Disable UPLL */
>  	writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
>  	while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
> 

I think the ifdef comment above is no show stopper for this patch but
should be considered at least for a future patch.
The rest looks sane to me.

Best regards

Andreas Bie?mann