public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] at91sam9x5: mmc: save environment as a file in FAT partition.
Date: Sun, 10 Mar 2013 16:55:17 +0100	[thread overview]
Message-ID: <513CACE5.7060301@googlemail.com> (raw)
In-Reply-To: <51274A1E.3040509@atmel.com>

Dear Josh Wu,

On 22.02.2013 11:36, Josh Wu wrote:
> Hi, Bo Shen
>
> Sorry for the late reply. I am taken over by other stuff. check my
> comments below.
>
> On 1/23/2013 5:31 PM, Bo Shen wrote:
>> Hi Josh,
>>
>> On 01/22/2013 04:36 PM, Josh Wu wrote:
>>> This patch will save U-Boot environment as a file: uboot.env, in FAT
>>> partition
>>> instead of saving it in raw sector of SD card.
>>> Since saving environment in raw sector has risk of corrupting the SD
>>> card and
>>> only can use very small size.
>>> Save as a FAT file has no above limitation.
>>>
>>> Signed-off-by: Josh Wu<josh.wu@atmel.com>
>>> ---
>>> this patch is based on v2013.01.
>>>
>>>   include/configs/at91sam9x5ek.h |   12 +++++++-----
>>>   1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> When I test this on at91sam9g35ek board, execute "saveenv", it will
>> report following information, any information for this?
>
> I also tested some sd card, and I meet this issue you met too.
> In such situation,  the command "mmc part" will report a unknow
> partition error.
> I suspect the issue is caused by either mmc driver or FAT partition part
> of code.
> And I will continue digging this issue. Thanks for report the errors.

Have you an updated version of this patch?

Best regards

Andreas Bie?mann

  reply	other threads:[~2013-03-10 15:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-22  8:36 [U-Boot] [PATCH] at91sam9x5: mmc: save environment as a file in FAT partition Josh Wu
2013-01-23  9:31 ` Bo Shen
2013-02-22 10:36   ` Josh Wu
2013-03-10 15:55     ` Andreas Bießmann [this message]
2013-03-11 11:18       ` Josh Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=513CACE5.7060301@googlemail.com \
    --to=andreas.devel@googlemail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox