From mboxrd@z Thu Jan 1 00:00:00 1970 From: Minkyu Kang Date: Tue, 12 Mar 2013 10:46:45 +0900 Subject: [U-Boot] [PATCH] EXYNOS: Correct ordering of SPL machine_params In-Reply-To: <1361255579-22801-1-git-send-email-rajeshwari.s@samsung.com> References: <1361255579-22801-1-git-send-email-rajeshwari.s@samsung.com> Message-ID: <513E8905.4090104@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 19/02/13 15:32, Rajeshwari Shinde wrote: > From: Simon Glass > > The mem_manuf is not in the correct order according to the string table. > This causes cros_bundle_firmware to get the BL2 settings in the wrong > order. This patch fixes the same. > > Signed-off-by: Simon Glass > Signed-off-by: Rajeshwari Shinde > --- > arch/arm/include/asm/arch-exynos/spl.h | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h > index 306b41d..46b25a6 100644 > --- a/arch/arm/include/asm/arch-exynos/spl.h > +++ b/arch/arm/include/asm/arch-exynos/spl.h > @@ -78,11 +78,12 @@ struct spl_machine_param { > */ > u32 uboot_size; > enum boot_mode boot_source; /* Boot device */ > - enum mem_manuf mem_manuf; /* Memory Manufacturer */ > unsigned frequency_mhz; /* Frequency of memory in MHz */ > unsigned arm_freq_mhz; /* ARM Frequency in MHz */ > u32 serial_base; /* Serial base address */ > u32 i2c_base; /* i2c base address */ > + u32 board_rev_gpios; /* Board revision GPIOs */ > + enum mem_manuf mem_manuf; /* Memory Manufacturer */ > } __attribute__((__packed__)); > #endif > > applied to u-boot-samsung. Thanks, Minkyu Kang.