From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Wed, 13 Mar 2013 09:33:34 -0700
Subject: [U-Boot] [Question][i.MX6q] Is it possible to configure and use
 the USB-OTG as EHCI host only?
In-Reply-To: <CAPRxd42duNWLVxfCEZbsP804Lsbo20kgfYv6x9NWJt3dQfQj-g@mail.gmail.com>
References: <CAPRxd40VA2iMR-Vpb6gsBsWJAGmxEcyVGOd_CjZHxkU5MJBzng@mail.gmail.com>
	<CAPRxd42duNWLVxfCEZbsP804Lsbo20kgfYv6x9NWJt3dQfQj-g@mail.gmail.com>
Message-ID: <5140AA5E.1060301@boundarydevices.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 03/13/2013 08:34 AM, Rafa? Fabich wrote:
> Hi,
>
> On Tue, Mar 12, 2013 at 1:04 PM, Rafa? Fabich <rafal.fabich@gmail.com> wrote:
>
>> I suppose it is possible to use USG-OTG instead of Host1 as EHCI host
>> in U-Boot somehow. Is there something I am missing?
>
>
> Sorry for answering to myself, but the problem is solved.
> In fact the controller had to be reinitialized after EHCI reset.
>
> Regards,
> Rafal

Got patch?