[U-Boot] [PATCH] Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry

[U-Boot] [PATCH] Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry

[Tom Warren]

This caused CAM_MCLK's pinmux reg to be locked out, since the
table parsing code couldn't find a matching entry for VI_ALT3
and wrote garbage to the register.

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
 arch/arm/cpu/tegra114-common/pinmux.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
index f037320..4f3c352 100644
--- a/arch/arm/cpu/tegra114-common/pinmux.c
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -239,7 +239,7 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
 	PINI(SDMMC4_DAT6, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
 	PINI(SDMMC4_DAT7, SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
 	PIN_RESERVED,	/* Reserved by t114: 0x3280 */
-	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
+	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),
 	PINI(GPIO_PCC1,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
 	PINI(GPIO_PBB0,   CAM,     I2S4,       VI,         VI_ALT1, VI_ALT3),
 	PINI(CAM_I2C_SCL, CAM,     VGP1,       I2C3,       RSVD3,   RSVD4),
-- 
1.7.0.4

[U-Boot] [PATCH] Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry

[Stephen Warren]

On 03/13/2013 04:10 PM, Tom Warren wrote:
> This caused CAM_MCLK's pinmux reg to be locked out, since the
> table parsing code couldn't find a matching entry for VI_ALT3
> and wrote garbage to the register.

> diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c

> @@ -239,7 +239,7 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {

> -	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
> +	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),

This doesn't seem right; the "alt" settings should be assigned in order
non-alt, alt1, alt2, alt3.

You say, "the table parsing code couldn't find a matching entry for
VI_ALT3". What was looking for that entry?

Also, shouldn't the pinmux driver be fixed not to write garbage to a
register, but instead return an error, if it can't find the table entry
it's looking for?

[U-Boot] [PATCH] Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry

[Tom Warren]

On Wed, Mar 13, 2013 at 3:34 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> On 03/13/2013 04:10 PM, Tom Warren wrote:
>> This caused CAM_MCLK's pinmux reg to be locked out, since the
>> table parsing code couldn't find a matching entry for VI_ALT3
>> and wrote garbage to the register.
>
>> diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
>
>> @@ -239,7 +239,7 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
>
>> -     PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
>> +     PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),
>
> This doesn't seem right; the "alt" settings should be assigned in order
> non-alt, alt1, alt2, alt3.

According to the TRM, CAM_MCLK takes the following 4 possible mux settings:

0 = VI
1 = VI_ALT1
2 = VI_ALT3
3 = RSVD3

There is no VI_ALT2 in the Tegra114 TRM. There was in the T30 TRM.

>
> You say, "the table parsing code couldn't find a matching entry for
> VI_ALT3". What was looking for that entry?
The pinmux table entry in
board/nvidia/dalmore/pinmux-config-dalmore.h, table
tegra114_pinmux_common[], VI_PINMUX(CAM_MCLK, VI_ALT3, ...), which is
parsed by pinmux_config_pingroup in pinmux.c.

>
> Also, shouldn't the pinmux driver be fixed not to write garbage to a
> register, but instead return an error, if it can't find the table entry
> it's looking for?
There's an assert if the mux isn't found - I thought that would handle
it, but it appears that it will only if DEBUG is enabled. I'll add
more error checking to the code - I have a pinmux.c/pinmux.h update
coming for other problems I found while chasing this down.

Tom

[U-Boot] [PATCH] Tegra114: pinmux: Fix bad CAM_MCLK func 3 table entry

[Stephen Warren]

On 03/13/2013 04:55 PM, Tom Warren wrote:
> On Wed, Mar 13, 2013 at 3:34 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
>> On 03/13/2013 04:10 PM, Tom Warren wrote:
>>> This caused CAM_MCLK's pinmux reg to be locked out, since the
>>> table parsing code couldn't find a matching entry for VI_ALT3
>>> and wrote garbage to the register.
>>
>>> diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
>>
>>> @@ -239,7 +239,7 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
>>
>>> -     PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
>>> +     PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT3, RSVD4),
>>
>> This doesn't seem right; the "alt" settings should be assigned in order
>> non-alt, alt1, alt2, alt3.
> 
> According to the TRM, CAM_MCLK takes the following 4 possible mux settings:
> 
> 0 = VI
> 1 = VI_ALT1
> 2 = VI_ALT3
> 3 = RSVD3
> 
> There is no VI_ALT2 in the Tegra114 TRM. There was in the T30 TRM.

Uggh, yes. The TRM is screwed up. Best to match it though I suppose.

So, the change is fine, and ends up matching the kernel's pinmux table
too. It might be a good idea to check for any other diffs.