[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

Hi

Our board reboots after send Wrong Image Format message to the console and
hangs. The Linux uImage is correctly placed in the NAND 0X200000. The
console input is somehow inhibit. I cannot type anything on it until the
board reboots . 
The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek
development kit.
It has only USB, Serial(DBGU), DDR2 and NAND.
I have tried to remove the LCD code but the linker says that printk is
missing.

Any clue?
Thanks




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[Bo Shen]

Hello,

On 3/13/2013 20:26, marcio at netopen.com.br wrote:
> Hi
>
> Our board reboots after send Wrong Image Format message to the console and
> hangs.

How do you do this? what output from console?

> The Linux uImage is correctly placed in the NAND 0X200000. The
> console input is somehow inhibit. I cannot type anything on it until the
> board reboots .

You mean, you can not interactive with u-boot, am I right?

> The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek
> development kit.
> It has only USB, Serial(DBGU), DDR2 and NAND.
> I have tried to remove the LCD code but the linker says that printk is
> missing.

Please remove LCD related #defined in board configuration header, while 
not remove the code.

What the detail message for "printk is missing."

BTW, Which version u-boot do you use?

Best Regards,
Bo Shen

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

  

Hi Bo Shen 

Thanks for you help. 

I have removed the LCD define
and I found out that ?rintk was introduced in a piece of code that I
imported from a code of mine. 

the version is: 

U-Boot
2012.10-00075-g0362411-dirty 

Now I managed to load the linux kernel
but I still get Wrong Image Format message and the console input does
not work. 

It seems something related to the 16 bits NAND I am using. I
have modified the code to accpet 16 bits NAND but the probem remains.


Thanks again 

Marcio 

On Wed, 13 Mar 2013 18:32:30 -0700 (PDT), Bo
Shen-3 [via U-Boot] wrote: 

> Hello, 
> 
> On 3/13/2013 20:26, [hidden
email] wrote: 
>> Hi 
>> 
>> Our board reboots after send Wrong Image
Format message to the console and 
>> hangs. 
> 
> How do you do this?
what output from console? 
> 
>> The Linux uImage is correctly placed in
the NAND 0X200000. The 
>> console input is somehow inhibit. I cannot
type anything on it until the 
>> board reboots . 
> 
> You mean, you
can not interactive with u-boot, am I right? 
> 
>> The board is an
AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek 
>> development
kit. 
>> It has only USB, Serial(DBGU), DDR2 and NAND. 
>> I have tried
to remove the LCD code but the linker says that printk is 
>> missing.

> 
> Please remove LCD related #defined in board configuration header,
while 
> not remove the code. 
> 
> What the detail message for "printk
is missing." 
> 
> BTW, Which version u-boot do you use? 
> 
> Best
Regards, 
> Bo Shen 
> _______________________________________________

> U-Boot mailing list 
> [hidden email] 
>
http://lists.denx.de/mailman/listinfo/u-boot [1]
> 
>
-------------------------
> 
> If you reply to this email, your message
will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149669.html
[2] 
> To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
> NAML [4]

  

Links:
------
[1]
http://lists.denx.de/mailman/listinfo/u-boot
[2]
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149669.html
[3]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code|+|amp|+|node=149567|+|amp|+|code=bWFyY2lvQG5ldG9wZW4uY29tLmJyfDE0OTU2N3wxMDMwNzQyMzcx
[4]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer|+|amp|+|id=instant_html%21nabble%3Aemail.naml|+|amp|+|base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace|+|amp|+|breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149696.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

  

Hi Bo Shen 

I have used a SAMBA old version and I managed to write
the Linux Kernel that can be recognized by U-boot but now it sends a
message "Veritying Checksum ....: Bad Data CRC. It seems that U-Boot is
only reading the first sector OK and the rest of the Kernel is being
worngly read. 

Thanks for your attention 

Marcio 

On Wed, 13 Mar 2013
18:32:30 -0700 (PDT), Bo Shen-3 [via U-Boot] wrote: 

> Hello, 
> 
> On
3/13/2013 20:26, [hidden email] wrote: 
>> Hi 
>> 
>> Our board reboots
after send Wrong Image Format message to the console and 
>> hangs. 
>

> How do you do this? what output from console? 
> 
>> The Linux uImage
is correctly placed in the NAND 0X200000. The 
>> console input is
somehow inhibit. I cannot type anything on it until the 
>> board
reboots . 
> 
> You mean, you can not interactive with u-boot, am I
right? 
> 
>> The board is an AT91SAM9M10 custom board based on the
AT91SAM9M10G45-ek 
>> development kit. 
>> It has only USB,
Serial(DBGU), DDR2 and NAND. 
>> I have tried to remove the LCD code but
the linker says that printk is 
>> missing. 
> 
> Please remove LCD
related #defined in board configuration header, while 
> not remove the
code. 
> 
> What the detail message for "printk is missing." 
> 
> BTW,
Which version u-boot do you use? 
> 
> Best Regards, 
> Bo Shen 
>
_______________________________________________ 
> U-Boot mailing list

> [hidden email] 
> http://lists.denx.de/mailman/listinfo/u-boot [1]
>

> -------------------------
> 
> If you reply to this email, your
message will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149669.html
[2] 
> To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
> NAML [4]

  

Links:
------
[1]
http://lists.denx.de/mailman/listinfo/u-boot
[2]
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149669.html
[3]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code|+|amp|+|node=149567|+|amp|+|code=bWFyY2lvQG5ldG9wZW4uY29tLmJyfDE0OTU2N3wxMDMwNzQyMzcx
[4]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer|+|amp|+|id=instant_html%21nabble%3Aemail.naml|+|amp|+|base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace|+|amp|+|breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149699.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[Bo Shen]

Hi Marcio,

On 3/14/2013 20:23, marcio at netopen.com.br wrote:
>
> Hi Bo Shen
>
> I have used a SAMBA old version and I managed to write
> the Linux Kernel that can be recognized by U-boot but now it sends a
> message "Veritying Checksum ....: Bad Data CRC. It seems that U-Boot is
> only reading the first sector OK and the rest of the Kernel is being
> worngly read.

Bad Data CRC don't help. Because, many possible issue will cause this issue.

Consider you use 16bit NAND flash. Have you define 
CONFIG_SYS_NAND_DBW_16 in board configuration header?

BTW, which bootstrap version do you use? (As I suspect the bootstrap has 
enabled for supporting 16bit NAND, so it read u-boot OK)

Please provide the log information output from dbgu.

>
> Thanks for your attention
>
> Marcio

Best Regards,
Bo Shen

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

  

Hi B. 

Thanks for your attention! 

>Bad Data CRC don't help.
Because, many possible issue will cause this issue. 

I will provide the
log.

>Consider you use 16bit NAND flash. Have you define

>CONFIG_SYS_NAND_DBW_16 in board configuration header? 

Yes I did
that. Before I include this definition the board did not even try to
boot the kernel.

>BTW, which bootstrap version do you use? (As I
suspect the bootstrap has 
>enabled for supporting 16bit NAND, so it
read u-boot OK)  

The At91bootstrap indeed loads U-boot OK. The problem
is afterward. 

U-Boot 2012.10-00075-g0362411-dirty (Mar 15 2013 -
11:33:53) 

U-Boot code: 73F00000 -> 73F370C0 BSS: -> 73F79654
CPU:
AT91SAM9G45
Crystal frequency: 12 MHz
CPU clock : 400 MHz
Master clock :
133.333 MHz
dram_init
dram_init tam_ram=67108864
testa_ram_readonly:
Inicio
testa_ram_readonly: Fim
monitor len: 00079654
ramsize:
04000000
TLB table at: 73ff0000
Top of RAM usable for U-Boot at:
73ff0000
Reserving 485k for U-Boot at: 73f76000
Reserving 640k for
malloc() at: 73ed6000
Reserving 32 Bytes for Board Info at:
73ed5fe0
Reserving 144 Bytes for Global Data at: 73ed5f50
New Stack
Pointer is: 73ed5f40
comeca a configurar a DRAM
Display
DRAM
display_dram_config:
DRAM: 64 MiB
reloca e perde o controle
00000000 

relocation Offset is: 00076000
board_init_r:
gd=73ed5f50
WARNING: Caches not enabled
monitor flash len: 0003C950
Now
running in RAM - U-Boot at: 73f76000
NAND: 256 MiB
board_init_r:
Initialize Environmet
env_relocate: Inicio gd=73ed5f50
gd->env_valid=0
Using default environment 

env_relocate:
Fim
board_init_r: jumptable
board_init_r: jumptable sai
In: serial
Out:
serial
Err: serial
board_init_r:interrupts
board_init_r:
initialize
board_init_r: main loop
### main_loop entered: bootdelay=3


### main_loop: bootcmd="nand read 0x70000000 0x200000 0x300000;bootm
0x70000000" 

Hit any key to stop autoboot: 0 

NAND read: device 0
offset 0x200000, size 0x300000
 3145728 bytes read: OK
* kernel: cmdline
image address = 0x70000000
## Booting kernel from Legacy Image at
70000000 ...
 Image Name: Linux-2.6.39.4
 Image Type: ARM Linux Kernel
Image (uncompressed)
 Data Size: 3630052 Bytes = 3.5 MiB
 Load Address:
70008000
 Entry Point: 70008000
 Verifying Checksum ... Bad Data
CRC
ERROR: can't get kernel image! 

  



--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149822.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[Bo Shen]

Hi Marcio,

? 2013/3/16 2:46, marcio at netopen.com.br ??:
>
>
> Hi B.
>
> Thanks for your attention!
>
>> Bad Data CRC don't help.
> Because, many possible issue will cause this issue.
>
> I will provide the
> log.
>
>> Consider you use 16bit NAND flash. Have you define
>
>> CONFIG_SYS_NAND_DBW_16 in board configuration header?
>
> Yes I did
> that. Before I include this definition the board did not even try to
> boot the kernel.
>
>> BTW, which bootstrap version do you use? (As I
> suspect the bootstrap has
>> enabled for supporting 16bit NAND, so it
> read u-boot OK)
>
> The At91bootstrap indeed loads U-boot OK. The problem
> is afterward.
>
> U-Boot 2012.10-00075-g0362411-dirty (Mar 15 2013 -
> 11:33:53)
>
> U-Boot code: 73F00000 -> 73F370C0 BSS: -> 73F79654
> CPU:
> AT91SAM9G45
> Crystal frequency: 12 MHz
> CPU clock : 400 MHz
> Master clock :
> 133.333 MHz
> dram_init
> dram_init tam_ram=67108864
> testa_ram_readonly:
> Inicio
> testa_ram_readonly: Fim
> monitor len: 00079654
> ramsize:
> 04000000
> TLB table at: 73ff0000
> Top of RAM usable for U-Boot at:
> 73ff0000
> Reserving 485k for U-Boot at: 73f76000
> Reserving 640k for
> malloc() at: 73ed6000
> Reserving 32 Bytes for Board Info at:
> 73ed5fe0
> Reserving 144 Bytes for Global Data at: 73ed5f50
> New Stack
> Pointer is: 73ed5f40
> comeca a configurar a DRAM
> Display
> DRAM
> display_dram_config:
> DRAM: 64 MiB
> reloca e perde o controle
> 00000000
>
> relocation Offset is: 00076000
> board_init_r:
> gd=73ed5f50
> WARNING: Caches not enabled
> monitor flash len: 0003C950
> Now
> running in RAM - U-Boot at: 73f76000
> NAND: 256 MiB
> board_init_r:
> Initialize Environmet
> env_relocate: Inicio gd=73ed5f50
> gd->env_valid=0
> Using default environment
>
> env_relocate:
> Fim
> board_init_r: jumptable
> board_init_r: jumptable sai
> In: serial
> Out:
> serial
> Err: serial
> board_init_r:interrupts
> board_init_r:
> initialize
> board_init_r: main loop
> ### main_loop entered: bootdelay=3
>
>
> ### main_loop: bootcmd="nand read 0x70000000 0x200000 0x300000;bootm
> 0x70000000"
>
> Hit any key to stop autoboot: 0
>
> NAND read: device 0
> offset 0x200000, size 0x300000
>   3145728 bytes read: OK
> * kernel: cmdline
> image address = 0x70000000
> ## Booting kernel from Legacy Image at
> 70000000 ...
>   Image Name: Linux-2.6.39.4
>   Image Type: ARM Linux Kernel
> Image (uncompressed)
>   Data Size: 3630052 Bytes = 3.5 MiB
>   Load Address:
> 70008000
>   Entry Point: 70008000
>   Verifying Checksum ... Bad Data
> CRC
> ERROR: can't get kernel image!

I see you read only 3MiB, however, the kernel size is 3.5 MiB (Data 
Size: 3630052 Bytes = 3.5 MiB). So, you only read partial kernel, this 
cause CRC error.

Best Regards,
Bo Shen

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

Hi Bo

That is indeed the problem.
I shrink the kernel to less than 3Mb and it works!

Thanks a lot
Best regards
Marico



--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149875.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

  

Hi Bo 

Now I am getting a problem mounting the NAND file system.
Do you have any idea? 

Below is the log. 

NAND read: device 0 offset
0x200000, size 0x300000
 3145728 bytes read: OK
* kernel: cmdline image
address = 0x70000000
## Booting kernel from Legacy Image at 70000000
...
 Image Name: Linux-2.6.39.4
 Image Type: ARM Linux Kernel Image
(uncompressed)
 Data Size: 3084960 Bytes = 2.9 MiB
 Load Address:
70008000
 Entry Point: 70008000
 Verifying Checksum ... OK
 kernel data
at 0x70000040, len = 0x002f12a0 (3084960)
 Loading Kernel Image ...
OK
OK
 kernel loaded at 0x70008000, end = 0x702f92a0
images.os.start =
0x70000000, images.os.end = 0x702f12e0
images.os.load = 0x70008000,
load_end = 0x702f92a0 

Starting kernel ... 

Uncompressing Linux...
done, booting the kernel.
Linux version 2.6.39.4 (root at marcio-VPCF135FB
[1]) (gcc version 4.4.1 (Sourcery G++
Lite 2010q1-202) ) #425 PREEMPT
Sat Mar 16 11:43:59 BRT 2013
CPU: ARM926EJ-S [41069265] revision 5
(ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction
cache
Machine: Atmel AT91SAM9M10G45-EK
Ignoring tag cmdline (using the
default kernel command line)
Memory policy: ECC disabled, Data cache
writeback
Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz
Built 1
zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel
command line: mem=64M at 0x70000000 [2] console=ttyS0,115200
mtdparts=mtdparts=n
and0:5M(Bootstrap),95M(system),-(userdata)
mtdids=nand0=nand0 ubi.mtd=1 ubi.mtd=
2 rw root=ubi0:system
rootfstype=ubifs init=/init gdb waitkgdb kgdboc=ttyS0,115
200
PID hash
table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table
entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries:
4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory:
58620k/58620k available, 6916k reserved, 0K highmem
Virtual kernel
memory layout:
 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
 fixmap :
0xfff00000 - 0xfffe0000 ( 896 kB)
 DMA : 0xff200000 - 0xffe00000 ( 12
MB)
 vmalloc : 0xd0800000 - 0xfee00000 ( 742 MB)
 lowmem : 0xc0000000 -
0xd0000000 ( 256 MB)
 modules : 0xbf000000 - 0xc0000000 ( 16 MB)
 .init
: 0xc0008000 - 0xc024b000 (2316 kB)
 .text : 0xc024b000 - 0xc05e0a14
(3671 kB)
 .data : 0xc05e2000 - 0xc0601d60 ( 128 kB)
Preemptable
hierarchical RCU implementation.
NR_IRQS:192
AT91: 160 gpio irqs in 5
banks
Console: colour dummy device 80x30
console [ttyS0]
enabled
Calibrating delay loop... 197.12 BogoMIPS (lpj=98560)
pid_max:
default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU:
Testing write buffer coherency: ok
NET: Registered protocol family
16
MARCIO: at91_add_device_isi end=C02453CC
AT91: Power Management
AT91:
Starting after general reset
bio: create slab  at 0
SCSI subsystem
initialized
usbcore: registered new interface driver usbfs
usbcore:
registered new interface driver hub
usbcore: registered new device
driver usb
i2c-gpio i2c-gpio.0: using pins 52 (SDA) and 53
(SCL)
at_hdmac at_hdmac: Atmel AHB DMA Controller ( cpy slave ), 8
channels
Switching to clocksource tcb_clksrc
Switched to NOHz mode on
CPU #0
NetWinder Floating Point Emulator V0.97 (double
precision)
hx170dec: dec/pp kernel module. $Revision: 1.9 $
hx170dec:
supports 8170 and 8190 hardware
hx170dec: base_port=0x00900000
irq=30
hx170dec: HW ID=0x81701250
hx170dec: Compatible HW found at
0x00900000
hx170dec: module inserted. Major = 253
memalloc: 8190 Linear
Memory Allocator, $Revision: 1.1 $
memalloc: linear memory base =
0x24000000
memalloc: allocation method: 64M
memalloc: 67108864 bytes
(64MB) configured. Check RAM size!
ashmem: initialized
JFFS2 version
2.2. (NAND) (SUMMARY) ?(c) 2001-2006 Red Hat, Inc.
msgmni has been set
to 114
io scheduler noop registered (default)
atmel_usart.0: ttyS0 at
MMIO 0xfeffee00 (irq = 1) is a ATMEL_SERIAL
atmel_usart.2: ttyS2 at MMIO
0xfff90000 (irq = 8) is a ATMEL_SERIAL
kgdb: Registered I/O driver
kgdboc.
brd: module loaded
loop: module loaded
atmel_nand atmel_nand: No
DMA support for NAND access.
NAND device: Manufacturer ID: 0x2c, Chip
ID: 0xba (Micron NAND 256MiB 1,8V 16-bi
t)
Scanning device for bad
blocks
Bad eraseblock 40 at 0x000000500000
Bad eraseblock 41 at
0x000000520000
Bad eraseblock 800 at 0x000006400000
Bad eraseblock 801
at 0x000006420000
Creating 3 MTD partitions on
"atmel_nand":
0x000000000000-0x000000500000 :
"Bootstrap"
0x000000500000-0x000006400000 :
"system"
0x000006400000-0x000010000000 : "userdata"
UBI: attaching mtd1
to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI:
logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit:
2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned
512)
UBI: data offset: 2048
uncorrectable error :
uncorrectable error
:
uncorrectable error :
uncorrectable error :
UBI error: ubi_io_read:
error -74 (ECC error) while reading 64 bytes from PEB 2:
0, read 64
bytes
uncorrectable error :
uncorrectable error :
uncorrectable error
:
uncorrectable error :
UBI error: ubi_io_read: error -74 (ECC error)
while reading 64 bytes from PEB 3:
0, read 64 bytes
uncorrectable error
:
uncorrectable error :
uncorrectable error :
uncorrectable error :
UBI
error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from
PEB 4:
0, read 64 bytes
uncorrectable error :
uncorrectable error
:
uncorrectable error :
uncorrectable error :
UBI error: ubi_io_read:
error -74 (ECC error) while reading 64 bytes from PEB 5:
0, read 64
bytes
uncorrectable error :
uncorrectable error :
uncorrectable error
:
uncorrectable error :
UBI error: ubi_io_read: error -74 (ECC error)
while reading 64 bytes from PEB 6:
0, read 64 bytes
uncorrectable error
:
uncorrectable error :
uncorrectable error :
uncorrectable error
:
uncorrectable error : 

  

Links:
------
[1]
mailto:root at marcio-VPCF135FB
[2] mailto:mem=64M at 0x70000000




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149881.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[Bo Shen]

Hi Marcio,
   This is not u-boot related, I think you should post this issue to 
Linux kernel mailing list.

On 03/16/2013 10:58 PM, marcio at netopen.com.br wrote:

[Snip]

> NAND device: Manufacturer ID: 0x2c, Chip
> ID: 0xba (Micron NAND 256MiB 1,8V 16-bi
> t)
> Scanning device for bad
> blocks
> Bad eraseblock 40 at 0x000000500000
> Bad eraseblock 41 at
> 0x000000520000
> Bad eraseblock 800 at 0x000006400000
> Bad eraseblock 801
> at 0x000006420000
> Creating 3 MTD partitions on
> "atmel_nand":
> 0x000000000000-0x000000500000 :
> "Bootstrap"
> 0x000000500000-0x000006400000 :
> "system"
> 0x000006400000-0x000010000000 : "userdata"
> UBI: attaching mtd1
> to ubi0
> UBI: physical eraseblock size: 131072 bytes (128 KiB)
> UBI:
> logical eraseblock size: 129024 bytes
> UBI: smallest flash I/O unit:
> 2048
> UBI: sub-page size: 512
> UBI: VID header offset: 512 (aligned
> 512)
> UBI: data offset: 2048

I check the NAND flash spec and find you may use wrong
parameters for generating UBIFS image.

--->8---
Page size x16: 1056 words (1024 + 32 words)
---<8---

and no sub-page.

So, I think mini I/O unit should be 1024 x 4 = 4096 Bytes

> uncorrectable error :
> uncorrectable error
> :
> uncorrectable error :
> uncorrectable error :
> UBI error: ubi_io_read:
> error -74 (ECC error) while reading 64 bytes from PEB 2:
> 0, read 64
> bytes

This is ECC error, I think you should also update
the driver for atmel_nand.c (mainly ECC layout)

Best Regards,
Bo Shen

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

  

Hi Bo 

Thanks a lot for your help. 

Best regards 

MArcio 

On
Sat, 16 Mar 2013 19:46:06 -0700 (PDT), Bo Shen [via U-Boot] wrote: 

>
Hi Marcio, 
> This is not u-boot related, I think you should post this
issue to 
> Linux kernel mailing list. 
> 
> On 03/16/2013 10:58 PM,
[hidden email] wrote: 
> 
> [Snip] 
> 
>> NAND device: Manufacturer ID:
0x2c, Chip 
>> ID: 0xba (Micron NAND 256MiB 1,8V 16-bi 
>> t) 
>>
Scanning device for bad 
>> blocks 
>> Bad eraseblock 40 at
0x000000500000 
>> Bad eraseblock 41 at 
>> 0x000000520000 
>> Bad
eraseblock 800 at 0x000006400000 
>> Bad eraseblock 801 
>> at
0x000006420000 
>> Creating 3 MTD partitions on 
>> "atmel_nand": 
>>
0x000000000000-0x000000500000 : 
>> "Bootstrap" 
>>
0x000000500000-0x000006400000 : 
>> "system" 
>>
0x000006400000-0x000010000000 : "userdata" 
>> UBI: attaching mtd1 
>>
to ubi0 
>> UBI: physical eraseblock size: 131072 bytes (128 KiB) 
>>
UBI: 
>> logical eraseblock size: 129024 bytes 
>> UBI: smallest flash
I/O unit: 
>> 2048 
>> UBI: sub-page size: 512 
>> UBI: VID header
offset: 512 (aligned 
>> 512) 
>> UBI: data offset: 2048 
> I check the
NAND flash spec and find you may use wrong 
> parameters for generating
UBIFS image. 
> 
> --->8--- 
> Page size x16: 1056 words (1024 + 32
words) 
> ---
> and no sub-page. 
> 
> So, I think mini I/O unit should
be 1024 x 4 = 4096 Bytes 
> 
>> uncorrectable error : 
>> uncorrectable
error 
>> : 
>> uncorrectable error : 
>> uncorrectable error : 
>> UBI
error: ubi_io_read: 
>> error -74 (ECC error) while reading 64 bytes
from PEB 2: 
>> 0, read 64 
>> bytes 
> 
> This is ECC error, I think
you should also update 
> the driver for atmel_nand.c (mainly ECC
layout) 
> 
> Best Regards, 
> Bo Shen 
> 
>
_______________________________________________ 
> U-Boot mailing list

> [hidden email] 
> http://lists.denx.de/mailman/listinfo/u-boot [1]
>

> -------------------------
> 
> If you reply to this email, your
message will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149902.html
[2] 
> To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
> NAML [4]

  

Links:
------
[1]
http://lists.denx.de/mailman/listinfo/u-boot
[2]
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149902.html
[3]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code|+|amp|+|node=149567|+|amp|+|code=bWFyY2lvQG5ldG9wZW4uY29tLmJyfDE0OTU2N3wxMDMwNzQyMzcx
[4]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer|+|amp|+|id=instant_html%21nabble%3Aemail.naml|+|amp|+|base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace|+|amp|+|breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149918.html
Sent from the U-Boot mailing list archive at Nabble.com.

[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

[marcio at netopen.com.br]

  

Hi B 

I would like to mention that I run U-boot either via the
code located in flash(using at91bootstrap) or directly in the DDRAM via
Eclipse/GDB/JTAG(Jflash). 

Thanks 

Marcio 

On Thu, 14 Mar 2013
19:31:39 -0700 (PDT), Bo Shen-3 [via U-Boot] wrote: 

> Hi Marcio, 
> 
>
On 3/14/2013 20:23, [hidden email] wrote: 
>> 
>> Hi Bo Shen 
>> 
>> I
have used a SAMBA old version and I managed to write 
>> the Linux
Kernel that can be recognized by U-boot but now it sends a 
>> message
"Veritying Checksum ....: Bad Data CRC. It seems that U-Boot is 
>> only
reading the first sector OK and the rest of the Kernel is being 
>>
worngly read. 
> 
> Bad Data CRC don't help. Because, many possible
issue will cause this issue. 
> 
> Consider you use 16bit NAND flash.
Have you define 
> CONFIG_SYS_NAND_DBW_16 in board configuration header?

> 
> BTW, which bootstrap version do you use? (As I suspect the
bootstrap has 
> enabled for supporting 16bit NAND, so it read u-boot
OK) 
> 
> Please provide the log information output from dbgu. 
> 
>>

>> Thanks for your attention 
>> 
>> Marcio 
> 
> Best Regards, 
> Bo
Shen 
> _______________________________________________ 
> U-Boot
mailing list 
> [hidden email] 
>
http://lists.denx.de/mailman/listinfo/u-boot [1]
> 
>
-------------------------
> 
> If you reply to this email, your message
will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149763.html
[2] 
> To unsubscribe from AT91SAM9M10 Custom Board U-boot reboot after
Wrong Image Format, click here [3].
> NAML [4]

  

Links:
------
[1]
http://lists.denx.de/mailman/listinfo/u-boot
[2]
http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149763.html
[3]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code|+|amp|+|node=149567|+|amp|+|code=bWFyY2lvQG5ldG9wZW4uY29tLmJyfDE0OTU2N3wxMDMwNzQyMzcx
[4]
http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer|+|amp|+|id=instant_html%21nabble%3Aemail.naml|+|amp|+|base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace|+|amp|+|breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml




--
View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-after-Wrong-Image-Format-tp149567p149825.html
Sent from the U-Boot mailing list archive at Nabble.com.