[U-Boot] [PATCH v5 3/9] phy: Add a new driver for OMAP's USB2 PHYs

[Marek Vasut <marex@denx.de>]

On 05/04/2018 04:34 PM, Jean-Jacques Hiblot wrote:
> This drivers supports the USB2 PHY found on omap5 and dra7 SOCs.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> 
> ---
> 
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> - omap-usb2-phy: Implement power_on and power_off callbacks
> 
>  drivers/phy/Kconfig         |   8 ++
>  drivers/phy/Makefile        |   1 +
>  drivers/phy/omap-usb2-phy.c | 196 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 205 insertions(+)
>  create mode 100644 drivers/phy/omap-usb2-phy.c
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 119edec..ed2b0a8 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -118,4 +118,12 @@ config MESON_GXL_USB_PHY
>  	  This is the generic phy driver for the Amlogic Meson GXL
>  	  USB2 and USB3 PHYS.
>  
> +config OMAP_USB2_PHY
> +	bool "Support OMAP's USB2 PHY"

s/OMAP's/TI OMAP/ ?
[...]

> +
> +#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT	BIT(0)
> +
> +#define OMAP_DEV_PHY_PD		BIT(0)
> +#define OMAP_USB2_PHY_PD	BIT(28)
> +
> +#define USB2PHY_DISCON_BYP_LATCH	BIT(31)
> +#define USB2PHY_ANA_CONFIG1		(0x4c)

Parenthesis not needed

> +DECLARE_GLOBAL_DATA_PTR;

Is GD really needed for DM driver ?

[...]

> +static int omap_usb2_phy_init(struct phy *usb_phy)
> +{
> +	struct udevice *dev = usb_phy->dev;
> +	struct omap_usb2_phy *priv = dev_get_priv(dev);
> +	u32 val;
> +
> +	if (priv->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {

Invert the condition to reduce level of indent .

> +		/*
> +		 *
> +		 * Reduce the sensitivity of internal PHY by enabling the
> +		 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
> +		 * resolves issues with certain devices which can otherwise
> +		 * be prone to false disconnects.
> +		 *
> +		 */
> +		val = readl(priv->phy_base + USB2PHY_ANA_CONFIG1);
> +		val |= USB2PHY_DISCON_BYP_LATCH;
> +		writel(val, priv->phy_base + USB2PHY_ANA_CONFIG1);
> +	}
> +
> +	return 0;
> +}
[...]


-- 
Best regards,
Marek Vasut