[U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target

[Minkyu Kang <mk7.kang@samsung.com>]

Dear Arkadiusz Wlodarczyk,

On 18/02/13 19:18, a.wlodarczyk at samsung.com wrote:
> From: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com>
> 
> Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> Tested-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> ---
> Changes
> This change encompasses set of adjustments in the configuration
> of the u-boot in the include/configs/s5p_goni.h, particularly
> change of rootfs type, change in kernel booting method and added DFU
> support. All those changes are connected with adjusting of existing
> goni configuration to latest changes in kernel.
> ---
>  board/samsung/goni/goni.c  |    7 +++++++
>  include/configs/s5p_goni.h |   37 ++++++++++++++++++++++++++++++++-----
>  2 files changed, 39 insertions(+), 5 deletions(-)
> 
> diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
> index ff76963..3c53106 100644
> --- a/board/samsung/goni/goni.c
> +++ b/board/samsung/goni/goni.c
> @@ -155,4 +155,11 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
>  	.regs_otg = S5PC110_OTG_BASE,
>  	.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
>  };
> +
> +void board_usb_init(void)
> +{
> +	debug("USB_udc_probe\n");
> +	s3c_udc_probe(&s5pc110_otg_data);
> +}

I think, this is unrelated changes to subject.

> +
>  #endif
> diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
> index 56e8347..8a824c7 100644
> --- a/include/configs/s5p_goni.h
> +++ b/include/configs/s5p_goni.h
> @@ -86,6 +86,17 @@
>  #define CONFIG_CMD_ONENAND
>  #define CONFIG_CMD_MTDPARTS
>  #define CONFIG_CMD_MMC
> +#define CONFIG_CMD_DFU
> +
> +/* USB Composite download gadget - g_dnl */
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_MMC
> +
> +/* USB Samsung's IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
> +#define CONFIG_G_DNL_MANUFACTURER "Samsung"
>  
>  #define CONFIG_BOOTDELAY		1
>  #define CONFIG_ZERO_BOOTDELAY_CHECK
> @@ -105,9 +116,13 @@
>  				",60m(qboot)"\
>  				",-(UBI)\0"
>  
> +#define CONFIG_DFU_ALT \
> +	"u-boot mmc 80 400;" \
> +	"uImage fat 0 2\0" \
> +
>  #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
>  
> -#define CONFIG_BOOTCOMMAND	"run ubifsboot"
> +#define CONFIG_BOOTCOMMAND	"run mmcboot"
>  
>  #define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
>  
> @@ -137,7 +152,7 @@
>  		"onenand erase 0x01560000 0x1eaa0000;" \
>  		"onenand write 0x32000000 0x1260000 0x8C0000\0" \
>  	"bootk=" \
> -		"onenand read 0x30007FC0 0xc00000 0x600000;" \
> +		"run loaduimage;" \
>  		"bootm 0x30007FC0\0" \
>  	"flashboot=" \
>  		"set bootargs root=/dev/mtdblock${bootblock} " \
> @@ -156,21 +171,28 @@
>  		"set bootargs " CONFIG_RAMDISK_BOOT \
>  		" initrd=0x33000000,8M ramdisk=8192\0" \
>  	"mmcboot=" \
> -		"set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
> +		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
> +		"rootfstype=${rootfstype}" \
>  		CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
>  		CONFIG_COMMON_BOOT "; run bootk\0" \
>  	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
>  	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
>  	"verify=n\0" \
> -	"rootfstype=cramfs\0" \
> +	"rootfstype=ext4\0" \
>  	"console=" CONFIG_DEFAULT_CONSOLE \
>  	"mtdparts=" MTDPARTS_DEFAULT \
>  	"meminfo=mem=80M mem=256M at 0x40000000 mem=128M at 0x50000000\0" \
> +	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
> +	"mmcdev=0\0" \
> +	"mmcbootpart=2\0" \
> +	"mmcrootpart=5\0" \
>  	"mmcblk=/dev/mmcblk1p1\0" \
>  	"bootblock=9\0" \
>  	"ubiblock=8\0" \
>  	"ubi=enabled\0" \
> -	"opts=always_resume=1"
> +	"opts=always_resume=1\0" \
> +	"dfu_alt_info=" CONFIG_DFU_ALT
> +
>  
>  /* Miscellaneous configurable options */
>  #define CONFIG_SYS_LONGHELP		/* undef to save memory */
> @@ -211,6 +233,10 @@
>  
>  #define CONFIG_DOS_PARTITION		1
>  
> +/* FAT */
> +#define CONFIG_CMD_FAT
> +#define CONFIG_FAT_WRITE
> +
>  #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
>  
>  #define CONFIG_SYS_CACHELINE_SIZE       64
> @@ -233,5 +259,6 @@
>  #define CONFIG_USB_GADGET
>  #define CONFIG_USB_GADGET_S3C_UDC_OTG
>  #define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
>  
>  #endif	/* __CONFIG_H */
> 

Thanks,
Minkyu Kang.