[U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config

[Tom Rini <trini@ti.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 04/02/2013 11:52 AM, Robert Nelson wrote:
> On Tue, Apr 2, 2013 at 10:38 AM, Adnan Ali
> <adnan.ali@codethink.co.uk> wrote:
>> On 02/04/13 16:19, Robert Nelson wrote:
>>> 
>>> On Tue, Apr 2, 2013 at 9:17 AM, Adnan Ali
>>> <adnan.ali@codethink.co.uk> wrote:
>>>> 
>>>> Enable btrfs support in mx53loco config
>>>> 
>>>> Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk> --- 
>>>> include/configs/mx53loco.h |    4 +++- 1 file changed, 3
>>>> insertions(+), 1 deletion(-)
>>>> 
>>>> diff --git a/include/configs/mx53loco.h
>>>> b/include/configs/mx53loco.h index a4b610f..62e9a76 100644 
>>>> --- a/include/configs/mx53loco.h +++
>>>> b/include/configs/mx53loco.h @@ -56,6 +56,8 @@ #define
>>>> CONFIG_GENERIC_MMC #define CONFIG_CMD_FAT #define
>>>> CONFIG_CMD_EXT2 +#define CONFIG_CMD_BTR +#define
>>>> CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION
>>>> 
>>>> /* Eth Configs */ @@ -128,7 +130,7 @@ "mmcroot=/dev/mmcblk0p3
>>>> rw rootwait\0" \ "mmcargs=setenv bootargs
>>>> console=ttymxc0,${baudrate} root=${mmcroot}\0" \ 
>>>> "loadbootscript=" \ -               "fatload mmc
>>>> ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +
>>>> "btrload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0"
>>>> \
>>> 
>>> Instead of changing this to btrload for everyone, wouldn't it
>>> make more sense to use the generic "load" command? As your
>>> already setting "CONFIG_CMD_FS_GENERIC"
>> 
>> Well idea of adding that was to enable btrfs and to show its
>> associated commands. Yes you can use generic 'load' command.
>> Defaults was using fatload so i change it to btrload.
> 
> That's perfectly fine for showing the btrfs command's as an RFC
> patch, but if this was heading for mainline as-is, it would be nice
> to use the "load" command instead of moving from one partition
> format that's been default for a couple years to a new format with
> less users. (not that I don't like the btrfs format. ;) as i've
> been running it on a few omap boards for a couple years now..)

Exactly.  The code needs to be built somewhere, to not be considered
dead code.  The next change here, to loadbootscript needs to be done
in a forward-compatible way like 'load' so now it just works for
everyone.  Thanks!

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=gDdz
-----END PGP SIGNATURE-----