From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 03 Apr 2013 12:15:55 +0200 Subject: [U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command In-Reply-To: <1364983043-8488-1-git-send-email-javier.martinez@collabora.co.uk> References: <1364983043-8488-1-git-send-email-javier.martinez@collabora.co.uk> Message-ID: <515C015B.3000205@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03/04/2013 11:57, Javier Martinez Canillas wrote: > board/freescale/mx6qsabrelite/README explain a procedure to > update the SPI-NOR on the SabreLite board without Freescale > manufacturing tool but following this procedure leads to both > "sf erase" and "sf write" failing on a mx6qsabrelite board: > > MX6QSABRELITE U-Boot > sf probe 1 > MX6QSABRELITE U-Boot > sf erase 0 0x40000 > SPI flash erase failed > MX6QSABRELITE U-Boot > sf write 0x10800000 0 0x40000 > SPI flash write failed > > This is because the chip-select 1 is wrong and the correct > value is 0x7300. > > Since commit c1173bd0 ("sf command: allow default bus and chip selects") > the chip-select and bus arguments for the sf probe command are optional > so let's just remove it and use "sf probe" instead. > > Signed-off-by: Javier Martinez Canillas > --- Applied to u-boot-imx, thanks. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================