From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Wed, 03 Apr 2013 07:11:20 -0700
Subject: [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass
 chip-select to sf probe command
In-Reply-To: <515C00DE.7090305@denx.de>
References: <1364228037-21962-1-git-send-email-javier.martinez@collabora.co.uk>
	<515BF56F.9050209@denx.de>
	<CABxcv=kceG6OfqLZ28da7aKo2MUP=MUoTHc61srd+Ut79ZC9gw@mail.gmail.com>
	<515C00DE.7090305@denx.de>
Message-ID: <515C3888.1090002@boundarydevices.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 04/03/2013 03:13 AM, Stefano Babic wrote:
> On 03/04/2013 11:50, Javier Martinez Canillas wrote:
>> Just for curiosity, in which configuration file did you see that? When
>> I had the issue I looked at
>> include/configs/{mx6qsabrelite,mx6_common}.h and
>> board/freescale/mx6qsabrelite/mx6qsabrelite.c but I didn't find what
>> chip-select was supposed to be used.
>
> include/configs/mx6qsabrelite.h:
>
> #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
>
> It should be 0x7300
>
0x5300?

	(((3-1)*32)+19)<<8