public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Dirk Behme <dirk.behme@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Date: Sat, 06 Apr 2013 09:27:14 +0200	[thread overview]
Message-ID: <515FCE52.3070605@gmail.com> (raw)
In-Reply-To: <1365209739-5586-3-git-send-email-festevam@gmail.com>

Am 06.04.2013 02:55, schrieb Fabio Estevam:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> mx6slevk board is a development board from Freescale based on the mx6 solo-lite
> processor.
>
> For details about mx6slevk, please refer to:
> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

> diff --git a/board/freescale/mx6slevk/imximage.cfg b/board/freescale/mx6slevk/imximage.cfg
> new file mode 100644
> index 0000000..df39a16
> --- /dev/null
> +++ b/board/freescale/mx6slevk/imximage.cfg
> @@ -0,0 +1,118 @@
> +/*
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License or (at your option) any later version.
> + *
> + * Refer docs/README.imxmage for more details about how-to configure
> + * and create imximage boot image
> + *
> + * The syntax is taken as close as possible with the kwbimage
> + */
> +
> +/* image version */
> +
> +IMAGE_VERSION 2
> +
> +/*
> + * Boot Device : one of
> + * spi, sd (the board has no nand neither onenand)
> + */
> +
> +BOOT_FROM	sd
> +
> +/*
> + * Device Configuration Data (DCD)
> + *
> + * Each entry must have the format:
> + * Addr-type           Address        Value
> + *
> + * where:
> + *	Addr-type register length (1,2 or 4 bytes)
> + *	Address	  absolute address of the register
> + *	value	  value to be stored in the register
> + */
> +DATA 4 0x020c4018 0x00260324
> +
> +DATA 4 0x020c4068 0xffffffff
> +DATA 4 0x020c406c 0xffffffff
> +DATA 4 0x020c4070 0xffffffff
> +DATA 4 0x020c4074 0xffffffff
> +DATA 4 0x020c4078 0xffffffff
> +DATA 4 0x020c407c 0xffffffff
> +DATA 4 0x020c4080 0xffffffff

Again this default stuff? ;)

Best regards

Dirk

  reply	other threads:[~2013-04-06  7:27 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-06  0:55 [U-Boot] [PATCH 1/3] iomux-v3: Place pad control definitions into common file Fabio Estevam
2013-04-06  0:55 ` [U-Boot] [PATCH 2/3] mx6: Add solo-lite variant support Fabio Estevam
2013-04-06  0:55 ` [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board Fabio Estevam
2013-04-06  7:27   ` Dirk Behme [this message]
2013-04-06 12:47     ` Fabio Estevam
2013-04-06 13:52       ` Dirk Behme
2013-04-06 14:15         ` Fabio Estevam
2013-04-06 16:30           ` Dirk Behme
2013-04-06 16:40             ` Fabio Estevam
2013-04-06 16:48               ` Dirk Behme
2013-04-10  6:01               ` Stefano Babic
2013-04-17  8:48               ` Stefano Babic
2013-04-21 17:00                 ` Fabio Estevam
2013-04-22  7:51                   ` Stefano Babic
2013-04-09 18:20 ` [U-Boot] [PATCH 1/3] iomux-v3: Place pad control definitions into common file Otavio Salvador

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=515FCE52.3070605@gmail.com \
    --to=dirk.behme@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox