public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Date: Tue, 9 Apr 2013 11:39:36 -0400	[thread overview]
Message-ID: <51643638.9090604@ti.com> (raw)
In-Reply-To: <87ip3v3ge1.fsf@dell.be.48ers.dk>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 04/09/2013 10:52 AM, Peter Korsgaard wrote:
>>>>>> "Tom" == Tom Rini <trini@ti.com> writes:
> 
> Tom> In the case of booting from certain peripherals, such as UART,
> we must Tom> not see what the device descriptor says for RAW or FAT
> mode because in Tom> addition to being nonsensical, it leads to a
> hang.  This is why we have Tom> a test currently for the boot mode
> being within range.  The problem Tom> however is that on some
> platforms we get MMC2_2 as the boot mode and not Tom> the defined
> value for MMC2, and in others we get the value for MMC2_2. Tom>
> This is required to fix eMMC booting on omap5_uevm.
> 
> Tom> Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD
> on Tom> classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC).
> 
> Tom> Signed-off-by: Tom Rini <trini@ti.com> Tom> --- Tom>
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S |   10 +++++++--- 
> Tom>  arch/arm/include/asm/arch-am33xx/spl.h         |    3 +++ 
> Tom>  arch/arm/include/asm/arch-omap3/spl.h          |    3 +++ 
> Tom>  arch/arm/include/asm/arch-omap4/spl.h          |    2 ++ Tom>
> arch/arm/include/asm/arch-omap5/spl.h          |    2 ++ Tom>  5
> files changed, 17 insertions(+), 3 deletions(-)
> 
> Tom> diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom> index
> b933fe8..90b3c8a 100644 Tom> ---
> a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom> +++
> b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom> @@ -60,10
> +60,14 @@ ENTRY(save_boot_params) Tom>  	ldr	r3, =boot_params Tom>
> strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ spl_boot_device <- r1
> 
> Tom> -	/* boot mode is passed only for devices that can raw/fat
> mode */ Tom> -	cmp	r2, #BOOT_DEVICE_XIP Tom> +	/* Tom> +	 * boot
> mode is only valid for device that can be raw or FAT booted. Tom> +
> * in other cases it may be fatal to look.  While platforms differ 
> Tom> +	 * in the values used for each MMC slot, they are
> contiguous. Tom> +	 */ Tom> +	cmp	r2, #MMC_BOOT_DEVICES_START Tom>
> blt	2f Tom> -	cmp	r2, #BOOT_DEVICE_MMC2 Tom> +	cmp	r2,
> #MMC_BOOT_DEVICES_END Tom>  	bgt	2f Tom>  	/* Store the boot mode
> (raw/FAT) in omap_bootmode */ Tom>  	ldr	r2, [r0,
> #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr Tom> diff
> --git a/arch/arm/include/asm/arch-am33xx/spl.h
> b/arch/arm/include/asm/arch-am33xx/spl.h Tom> index
> f60b086..14a2c7c 100644 Tom> ---
> a/arch/arm/include/asm/arch-am33xx/spl.h Tom> +++
> b/arch/arm/include/asm/arch-am33xx/spl.h Tom> @@ -37,4 +37,7 @@ 
> Tom>  #define BOOT_DEVICE_USBETH	68 Tom>  #define
> BOOT_DEVICE_CPGMAC	70 Tom>  #define BOOT_DEVICE_MMC2_2      0xFF 
> Tom> + Tom> +#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1 Tom>
> +#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
> 
> Doesn't this break ti814x with the funky inverted mmc1/mmc2?

That's probably true, dang.  I knew OMAP3 also had them swapped,
number-wise but didn't recall until you said this that it doesn't use
that code at all.  I'll V2 this part.  Thanks!

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=2NME
-----END PGP SIGNATURE-----

  reply	other threads:[~2013-04-09 15:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-05 16:21 [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support Tom Rini
2013-04-05 16:21 ` [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC Tom Rini
2013-04-08 10:44   ` Sricharan R
2013-04-09 14:52   ` Peter Korsgaard
2013-04-09 15:39     ` Tom Rini [this message]
2013-04-05 16:21 ` [U-Boot] [PATCH 2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h Tom Rini
2013-04-08 16:34   ` Tom Rini
2013-04-05 16:21 ` [U-Boot] [PATCH 3/3] omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE Tom Rini
2013-04-08 16:35 ` [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support Tom Rini
2013-04-08 16:55 ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51643638.9090604@ti.com \
    --to=trini@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox