From mboxrd@z Thu Jan  1 00:00:00 1970
From: Carmine Garripoli <garripoli.carmine@gmail.com>
Date: Mon, 15 Apr 2013 13:16:24 +0200
Subject: [U-Boot] uboot_porting_guide
Message-ID: <516BE188.1000405@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi everybody,
I'm an electronics engineering student and i'm very passionated about 
embedded systems. I would like to design my own totally custom board. 
Supposing that i've already choosen an ARM microprocessor supported by 
linux kernel, ram and nand flash and i've designed my board, i would 
like to know if there is a generic guide for "u-boot porting". I've 
already done a search on the net for "uboot porting guide" but 99,9% of 
material i found sounds like "...if your board is similar to another 
already existing", "....use command  make <boardname>_config with 
similar board" etc. etc.
Now does a general porting guide for uboot exist somewhere?

I really thank you for your answer
Metalgarri