From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pierre AUBERT Date: Fri, 19 Apr 2013 07:27:26 +0200 Subject: [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL In-Reply-To: References: <1366296086-22394-1-git-send-email-p.aubert@staubli.com> Message-ID: <5170D5BE.5040804@staubli.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, I can split the patch if you wish, but in this case the compilation would be broken for the sabreauto if only one of the two patches is applied. Best regards Pierre Aubert Le 18/04/2013 19:51, Fabio Estevam a ?crit : > Hi Pierre, > > On Thu, Apr 18, 2013 at 11:41 AM, Pierre Aubert wrote: > >> diff --git a/boards.cfg b/boards.cfg >> index f785da8..c002cf7 100644 >> --- a/boards.cfg >> +++ b/boards.cfg >> @@ -256,9 +256,10 @@ mx53smd arm armv7 mx53smd freesca >> ima3-mx53 arm armv7 ima3-mx53 esg mx5 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg >> vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg >> mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg >> -mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg >> +mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q > mx6qsabreauto changes should be done on a different patch. > > Regards, > > Fabio Estevam