From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 25 Apr 2013 21:15:01 +0200 Subject: [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register In-Reply-To: <1366223610-29127-1-git-send-email-festevam@gmail.com> References: <1366223610-29127-1-git-send-email-festevam@gmail.com> Message-ID: <517980B5.8080705@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 17/04/2013 20:33, Fabio Estevam wrote: > From: Fabio Estevam > > Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz. > > CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the > bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c > from the mainline kernel. > > mx6q_4x_mt41j128.cfg is also used by mx6qsabresd, and it is safe to use it for > this board as well. > > Signed-off-by: Fabio Estevam > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================