From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Mon, 29 Apr 2013 05:39:24 +0200
Subject: [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq
In-Reply-To: <083584de1b9d279efef38c0ce88f8fed760fa9aa.1366713845.git.michal.simek@xilinx.com>
References: <cover.1366713845.git.michal.simek@xilinx.com>
	<083584de1b9d279efef38c0ce88f8fed760fa9aa.1366713845.git.michal.simek@xilinx.com>
Message-ID: <517DEB6C.1050503@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Michal,

AOn 23.04.2013 12:46, Michal Simek wrote:
> Support Xilinx Zynq i2c controller.
> 
> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> CC: Heiko Schocher <hs@denx.de>
> ---
> Changes in v2:
> - Remove CONFIG_ prefix from non configurable macros (i2c)
> - Fix checkpatch warnings (i2c)
> - Fix #define<space>Macro name (i2c)
> - Fix multiline comments (i2c)
> - Remove trailing 1 for configurations (i2c)
> 
>  arch/arm/include/asm/arch-zynq/hardware.h |   2 +
>  drivers/i2c/Makefile                      |   1 +
>  drivers/i2c/zynq_i2c.c                    | 306 ++++++++++++++++++++++++++++++
>  include/configs/zynq.h                    |  11 ++
>  4 files changed, 320 insertions(+)
>  create mode 100644 drivers/i2c/zynq_i2c.c

As this is in a patchserie, I just ack your patch:

Ackd-by: Heiko Schocher <hs@denx.de>

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany