* [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO
@ 2013-05-06 11:33 Benoît Thébaudeau
2013-05-06 13:22 ` Stefano Babic
0 siblings, 1 reply; 2+ messages in thread
From: Benoît Thébaudeau @ 2013-05-06 11:33 UTC (permalink / raw)
To: u-boot
MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to
connect the FEC.
Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
---
board/freescale/mx35pdk/mx35pdk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 12e84d7..9f667d2 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -245,7 +245,7 @@ int board_late_init(void)
imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);
- gpio_direction_output(IMX_GPIO_NR(2, 5), 1);
+ gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
}
val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO
2013-05-06 11:33 [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO Benoît Thébaudeau
@ 2013-05-06 13:22 ` Stefano Babic
0 siblings, 0 replies; 2+ messages in thread
From: Stefano Babic @ 2013-05-06 13:22 UTC (permalink / raw)
To: u-boot
On 06/05/2013 13:33, Beno?t Th?baudeau wrote:
> MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to
> connect the FEC.
>
> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> ---
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
> index 12e84d7..9f667d2 100644
> --- a/board/freescale/mx35pdk/mx35pdk.c
> +++ b/board/freescale/mx35pdk/mx35pdk.c
> @@ -245,7 +245,7 @@ int board_late_init(void)
>
> imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);
>
> - gpio_direction_output(IMX_GPIO_NR(2, 5), 1);
> + gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
> }
>
> val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
>
Thanks for fixing it !
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-05-06 13:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-06 11:33 [U-Boot] [PATCH] imx: mx35pdk: Fix MUX2_CTR GPIO Benoît Thébaudeau
2013-05-06 13:22 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox