From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sricharan R Date: Thu, 9 May 2013 11:34:33 +0530 Subject: [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function In-Reply-To: <20130508175627.GJ6931@bill-the-cat> References: <1366800085-27078-1-git-send-email-r.sricharan@ti.com> <518A18CE.6040801@ti.com> <20130508175627.GJ6931@bill-the-cat> Message-ID: <518B3C71.5000707@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tom, On Wednesday 08 May 2013 11:26 PM, Tom Rini wrote: > On Wed, May 08, 2013 at 02:50:14PM +0530, Sricharan R wrote: >> Tom, >> >> On Wednesday 24 April 2013 04:11 PM, Sricharan R wrote: >>> The save_boot_params function does not store the data in a >>> always writable area. So the code is broken for a 'XIP' boot. >>> This series corrects this by storing it in 'gd' and also >>> adds a 'C' equivalent function for the same. The essential cleanups >>> for the same are added in this. >>> >>> Tested this on omap5 uevm board with SD/EMMC boot. >>> omap4/5 boards does not have a XIP flash. >>> So yet to test XIP with this series. >>> >>> Also verfied a MAKEALL for armv7. >>> >>> Sricharan R (5): >>> ARM: OMAP: Make omap_boot_parameters common across socs >>> ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common >>> ARM: OMAP: Correct save_boot_params and replace with 'C' function >>> ARM: OMAP: Cleanup boot parameters usage >>> ARM: OMAP: Add arch_cpu_init function >>> >>> arch/arm/cpu/armv7/lowlevel_init.S | 8 +++- >>> arch/arm/cpu/armv7/omap-common/boot-common.c | 20 ++------ >>> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 61 +++++++++++++++++++++--- >>> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 50 +------------------ >>> arch/arm/cpu/armv7/omap4/emif.c | 4 +- >>> arch/arm/cpu/armv7/omap4/hw_data.c | 2 +- >>> arch/arm/cpu/armv7/omap4/hwinit.c | 3 +- >>> arch/arm/cpu/armv7/omap5/emif.c | 4 +- >>> arch/arm/cpu/armv7/omap5/hw_data.c | 2 +- >>> arch/arm/cpu/armv7/omap5/hwinit.c | 3 +- >>> arch/arm/include/asm/arch-am33xx/omap.h | 25 ---------- >>> arch/arm/include/asm/arch-omap4/omap.h | 36 -------------- >>> arch/arm/include/asm/arch-omap4/sys_proto.h | 11 ++--- >>> arch/arm/include/asm/arch-omap5/omap.h | 36 -------------- >>> arch/arm/include/asm/arch-omap5/sys_proto.h | 12 ++--- >>> arch/arm/include/asm/global_data.h | 8 ++++ >>> arch/arm/include/asm/omap_boot.h | 50 +++++++++++++++++++ >>> arch/arm/include/asm/omap_common.h | 19 ++++++++ >>> common/spl/spl.c | 12 +++-- >>> include/configs/am335x_evm.h | 4 ++ >>> include/configs/omap4_common.h | 4 ++ >>> include/configs/omap5_common.h | 3 ++ >>> include/configs/pcm051.h | 4 ++ >>> include/configs/ti814x_evm.h | 4 ++ >>> include/spl.h | 1 - >>> 25 files changed, 187 insertions(+), 199 deletions(-) >>> create mode 100644 arch/arm/include/asm/omap_boot.h >>> >> Does this look ok, go to get in ? > With the posted changes to 4 and 5 (for platforms that are new to > u-boot-ti/master), applied, thanks for the reminder! > Thanks for it !! Regards, Sricharan