[U-Boot] [Patch v2 1/4] USB: ohci-at91: support sama5d3x devices

["Andreas Bießmann" <andreas.devel@googlemail.com>]

Dear Bo Shen,

On 12.03.2013 07:15, Bo Shen wrote:
> Add OHCI support for sama5d3x devices

can you please rebase this patch and send again?

>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
> change in v2:
>    - change #if defined to #ifdef for sama5d3
> ---
>   drivers/usb/host/ohci-at91.c |   14 ++++++++++++--
>   1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index efd711d..086cd0f 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -42,7 +42,7 @@ int usb_cpu_init(void)
>   	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
>   		;
>   #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> -	defined(CONFIG_AT91SAM9X5)
> +	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
>   	/* Enable UPLL */
>   	writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
>   		&pmc->uckr);
> @@ -54,7 +54,12 @@ int usb_cpu_init(void)
>   #endif
>
>   	/* Enable USB host clock. */
> +#ifdef CONFIG_SAMA5D3
> +	writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1);

Please reorder the patches so that pmc->pcer1 is declared before used.

Best regards

Andreas Bie?mann