From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] ulpi patch in uboot
Date: Thu, 16 May 2013 12:34:39 +0200 [thread overview]
Message-ID: <5194B63F.2040205@denx.de> (raw)
In-Reply-To: <5194AA1B.40201@amarulasolutions.com>
On 16/05/2013 11:42, Michael Trimarchi wrote:
> Hi a;;,
>
Hi Michael,
(I posted also to u-boot ML to check if someone else had issues)
> I think that this patch could be wrong for omap4 and omap3. The opcode shift
> shuld be 22 and not 21. And are you sure that are you using the bit 31
> in the correct way?
>
> Stefano, are you sure about your testing?
Well, it happened more as one year ago, but I tested again this morning
with the AM3517 I used for testing, using a version 2013.04-rc1
twister => usb start
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
twister => fatls usb 0
.disk/
So it seems working - I have not yet checked in manual, but if the shift
is wrong, it seems it has no drawbacks on my board ;-(
Best regards,
Stefano
>
> Michael
>
> commit 928c4bdf9b069be218436d25b96721395c4d671f
> Author: Govindraj.R <govindraj.raja@ti.com>
> Date: Mon Feb 6 03:55:32 2012 +0000
>
> usb: ulpi: Add omap-ulpi-view port support
>
> Based on discussion from this thread [1].
> Adding omap-view port that helps us in using the generic ulpi
> framework for any ulpi phy ops using the INSNREG05_ULPI viewport
> reg available on omap platform.
>
> Currently ehci ports are available on omap3/4 platforms so enable the same
> for beagle and panda, patch is tested on the same boards.
>
> Thanks to Igor Grinberg <grinberg@compulab.co.il> for reviewing the
> omap-ehci patches and suggesting this approach.
>
> [1]: http://www.mail-archive.com/u-boot at lists.denx.de/msg76076.html
>
>
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next parent reply other threads:[~2013-05-16 10:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5194AA1B.40201@amarulasolutions.com>
2013-05-16 10:34 ` Stefano Babic [this message]
2013-05-16 11:17 ` [U-Boot] ulpi patch in uboot Michael Trimarchi
2013-05-16 13:19 ` Michael Trimarchi
2013-05-16 14:24 ` Igor Grinberg
2013-05-16 14:35 ` Stefano Babic
2013-05-16 15:00 ` Michael Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5194B63F.2040205@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox