[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)

[Sricharan R <r.sricharan@ti.com>]

Hi,
On Thursday 16 May 2013 08:59 PM, Tom Rini wrote:
> On Thu, May 16, 2013 at 05:56:57PM +0300, Lubomir Popov wrote:
> [snip]
>> The same U-Boot (yesterday's u-boot-ti/master), just configured for
>> my SOM5_EVB board:
>>
>> U-Boot SPL 2013.04-11569-ge3db066-dirty (May 16 2013 - 16:14:17)
>> OMAP5430 ES1.0
>>
>> U-Boot SPL 2013.04-11569-ge3db066-dirty (May 16 2013 - 16:14:17)
>> OMAP5430 ES1.0
>> OMAP SD/MMC: 0
>> reading u-boot.img
>> reading u-boot.img
>>
>>
>> U-Boot 2013.04-11569-ge3db066-dirty (May 16 2013 - 16:14:17)
> [snip]
>> Also please notice that the SPL now seems to be executed twice (on both
>> boards). This was not the case until recently, at least with the mainline.
>> Anything to do with all those relocation discussions/patches?
> Can you bisect and see when something changed?  It looks like it's
> printing the same string twice, not loading SPL loading SPL loading
> U-Boot, but I could be wrong..
I tried SD and EMMC boot on the latest mainline on my 5432 ES2.0 and
did not see any issue. What boot are you trying ?

U-Boot SPL 2013.04-00237-g9d32686 (May 17 2013 - 10:54:15)
OMAP5432 ES2.0
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img


U-Boot 2013.04-00237-g9d32686 (May 17 2013 - 10:54:15)

CPU  : OMAP5432 ES2.0
Board: OMAP5430 EVM
I2C:   ready
DRAM:  2 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
OMAP5430 EVM #

Regards,
 Sricharan