From mboxrd@z Thu Jan  1 00:00:00 1970
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Mon, 20 May 2013 13:05:32 +0300
Subject: [U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access
 to the transceiver configuration registers using the ulpi bus.
In-Reply-To: <20130520085326.GA21067@panicking>
References: <20130520085326.GA21067@panicking>
Message-ID: <5199F56C.5030001@compulab.co.il>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Michael,

Sorry for missing the subject last time...
For the subject:
In the square brackets, it should be stated just [PATCH vX]
Afterwards, should come the subsystem/platform
and then short yet meaningful patch description. For example:
[PATCH v2] usb: omap: ulpi: fix ulpi transceiver access

Also, the patch submission rules are available at:
http://www.denx.de/wiki/view/U-Boot/Patches#General_Patch_Submission_Rules
I think it is worth reading.


On 05/20/13 11:53, Michael Trimarchi wrote:
> This patch fix the omap access to the transceiver configuration registers
> using the ulpi bus. As reported by the documentation the bit31 is used
> only to check if the transaction is done or still running and the reading
> and writing operation have different offset and have different values.
> What we need to do at the end of a transaction is leave the bus in done state.
> Anyway an error using the ulpi omap register is not recoverable so any error
> give out the usage of this interface.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>

You can add the below tag to your future submissions of this patch
(if you decide to fix the subject).

Reviewed-by: Igor Grinberg <grinberg@compulab.co.il>

> ---
> 
> Changes for V2:
> 	- Fix commit message
> 
> ---
>  drivers/usb/ulpi/omap-ulpi-viewport.c |   40 +++++++--------------------------
>  1 file changed, 8 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c b/drivers/usb/ulpi/omap-ulpi-viewport.c
> index 3c1ea1a..2a42033 100644
> --- a/drivers/usb/ulpi/omap-ulpi-viewport.c
> +++ b/drivers/usb/ulpi/omap-ulpi-viewport.c
> @@ -22,18 +22,19 @@
>  #include <asm/io.h>
>  #include <usb/ulpi.h>
>  
> -#define OMAP_ULPI_WR_OPSEL	(3 << 21)
> -#define OMAP_ULPI_ACCESS	(1 << 31)
> +#define OMAP_ULPI_WR_OPSEL	(2 << 22)
> +#define OMAP_ULPI_RD_OPSEL	(3 << 22)
> +#define OMAP_ULPI_START		(1 << 31)
>  
>  /*
> - * Wait for the ULPI Access to complete
> + * Wait for having ulpi in done state
>   */
>  static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
>  {
>  	int timeout = CONFIG_USB_ULPI_TIMEOUT;
>  
>  	while (--timeout) {
> -		if ((readl(ulpi_vp->viewport_addr) & mask))
> +		if (!(readl(ulpi_vp->viewport_addr) & mask))
>  			return 0;
>  
>  		udelay(1);
> @@ -43,40 +44,15 @@ static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
>  }
>  
>  /*
> - * Wake the ULPI PHY up for communication
> - *
> - * returns 0 on success.
> - */
> -static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp)
> -{
> -	int err;
> -
> -	if (readl(ulpi_vp->viewport_addr) & OMAP_ULPI_ACCESS)
> -		return 0; /* already awake */
> -
> -	writel(OMAP_ULPI_ACCESS, ulpi_vp->viewport_addr);
> -
> -	err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
> -	if (err)
> -		debug("ULPI wakeup timed out\n");
> -
> -	return err;
> -}
> -
> -/*
>   * Issue a ULPI read/write request
>   */
>  static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
>  {
>  	int err;
>  
> -	err = ulpi_wakeup(ulpi_vp);
> -	if (err)
> -		return err;
> -
>  	writel(value, ulpi_vp->viewport_addr);
>  
> -	err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
> +	err = ulpi_wait(ulpi_vp, OMAP_ULPI_START);
>  	if (err)
>  		debug("ULPI request timed out\n");
>  
> @@ -85,7 +61,7 @@ static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
>  
>  int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
>  {
> -	u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
> +	u32 val = (OMAP_ULPI_START | (ulpi_vp->port_num & 0xf) << 24) |
>  			OMAP_ULPI_WR_OPSEL | ((u32)reg << 16) | (value & 0xff);
>  
>  	return ulpi_request(ulpi_vp, val);
> @@ -95,7 +71,7 @@ u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg)
>  {
>  	int err;
>  	u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
> -			 OMAP_ULPI_WR_OPSEL | ((u32)reg << 16);
> +			 OMAP_ULPI_RD_OPSEL | ((u32)reg << 16);
>  
>  	err = ulpi_request(ulpi_vp, val);
>  	if (err)
> 

-- 
Regards,
Igor.