From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 27 May 2013 08:51:23 +0200 Subject: [U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support In-Reply-To: <81BA6E5E0BC2344391CABCEE22D1B6D833A635@039-SN1MPN1-003.039d.mgd.msft.net> References: <1369126981-13970-1-git-send-email-b18965@freescale.com> <264205853.1016550.1369153652659.JavaMail.root@advansee.com> <81BA6E5E0BC2344391CABCEE22D1B6D8335A6C@039-SN1MPN1-003.039d.mgd.msft.net> <478587716.1108895.1369328969868.JavaMail.root@advansee.com> <81BA6E5E0BC2344391CABCEE22D1B6D833A635@039-SN1MPN1-003.039d.mgd.msft.net> Message-ID: <51A3026B.9090500@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 24/05/2013 08:18, Wang Huan-B18965 wrote: > [Alison Wang] We usually named the Powerpc(before QorIQ) as MPC and ColdFire as MCF, So we generally named the Vybrid as MVF. > We had some internal discussion for this, and we think we should use VF instead of MVF, we will follow the internal suggestions to > name the soc as VF610. Thanks for your comments. It is nice if you use the same name everybody finds on Freescale's Website. However, I hope you decide that the names will be consistent with the kernel, and also the patches that are currently posted to linux-arm will change the processor name. The worst thing is if we get a name in u-boot and another one in kernel. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================